Worktrainer OneLeg User manual

AVIS - Ces instructions doivent être sauvegardées
for future use - Instructions must be followed
WICHTIG - FÜR SPÄTERE VERWENDUNG
AUFBEWAHREN - SORGFÄLTIG LESEN
Pour utilisation future - Les instructions doivent
être suiviese
IMPORTANTE, conservar estas instrucciones
para futuro uso. Siga estas instrucciones atentamente
VIGTIGT- Samlevejledningen skalopbevares
i arkiv til senerebrug-Skalgennemlæses nøje
NOTICE -These instructions must be saved
1 - 6
ONELEG ASSEMBLY INSTRUCTION
2 - 6
NO. 1
1 1 1 1 1
2
1 2
3 4 5 6
2
1
3
4
5
3
6
7
CHECK LIST
M5
A (6pcs)
M8x10mm
E
B (4pcs)
ST5.0x16mm
C (2pcs)
ST4.2x16mm
D (4pcs)
M8*20
7
QTY.
(optional)

3 - 6
2
3
3
A (6pcs)
M8x10mm
B (4pcs)
ST5.0x16mm
1
1
2
E
M5
A
A
B
B
B
B
A
A
A
A
OR
(optional)
4 - 6
4
C (2pcs)
ST4.2x16mm
D (4pcs)
M8*20
D
CC
CC
D
D
D
E
M5
3
4OR
LEFT OR RIGHT

5 - 6
6
7
5
6 - 6
Display Instruction
Setting solution for desk function
Up & Down Key Display Screen
Memory Key
Press M3 BACK to the main
Sensitivity of downing
surface,all setting complete
1 max sensitivity
A
anti collision
2 better sensitivity
3 general sensitivity
4 less sensitivity
5 Insensitive
1 general sensitivity
2 less sensitivity
Press M3 BACK to the setting
surface, the data reserved
b1 cm
cm or inch setting 2 inch
Sensitivity of upping
anti collision setting
CUsing ︿ or ﹀ key to set basic height
Basic height setting
dUsing ︿ or ﹀ to adjust the height
Maximum height setting
E
Press M4 until you hear
the second beep sound
(around 10s).
use ︿ or ﹀ key to choose
A,b,C,d,E,F.
︿
﹀
︿
﹀
︿
Press
M4
﹀
Press
M4
Press
M4
Press
M4
Press
M4
︿
﹀
Up or Down Key
To adjust the height of the desk, keep pressing the up or down arrow until the desk is at the
prefered height.
Display screen
Display the height value of the desk.
Memory Key (M1/ M2/ M3/ M4)
Safety function
When the desktop is on the rise or going down, encountered reverse resistance wil make
the desk rebound.
After setting the memory keys, the desk can lift automatically to memory height.
How to set memory mode:
The whole handset surface is a button panel. If there is no button pressed within 30 seconds,
the screen is locked and M1/M2/M3/M4 keys are locked correspondingly. To activate the display,
press the Up or Down key first. The display can be used when the display screen lights up.
Please keep pressing M1/M2/M3/M4 key for 5 seconds, until "beep" sound, the memory height
is successfully saved. Then press M1/M2/M3/M4, the desk moves to the programmed
memory height automatically.