World Market Caspian 608271 User manual

THANK YOU FOR PURCHASING OUR QUALITY PRODUCT. IF YOU HAVE ANY
QUESTIONS PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE,
PLEASE CONTACT YOUR NEAREST WORLD MARKET STORE, OR CALL OUR
TOLL FREE NUMBER 877-967-5362 FOR ASSISTANCE.
Caspian U-base Dining Table
R
SKU - 608271
NOT FOR COMMERCIAL USE.
Page 1
Assembly Instructions

Page 2
Top Frame
PICTURE QTY
DESCRIPTION
LABEL
A 1
B
1
Part List
Leg Frame
C
2
Support Stretcher

LABEL DESCRIPTION Q.TY PICTURE
Page 3
LABEL DESCRIPTION QTY PICTURE
Tool List
H-1
16
16
Lock Washer ∅10 x 16 x T2 mm
Flat Washer ∅10 x 22 x T2 mm
1T-1 Wrench 17mm
Short Bolt M10 x 50 mm 2
H-4
H-5
Hardware List
H-2 Medium Bolt M10 x 60 mm 12
H-3 Long Bolt M10 x 85 mm 2

Before Beginning:
Read instructions, cover to cover.
In case of missing parts, please contact your nearest Cost Plus World
Market store or our customer service call center 877-967-5362.
Assemble on a clean non-marring surface (packing foam).
Unpack all hardware bags and components to ensure you have all parts.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Save all packaging until finished.
Page 4
Assembly Preparation

Step 1
Page 5
(H-2) Medium Bolt x 12
(H-4) Lock Washer x 12
Assembly Steps
Step 2
(H-5) Flat Washer x 12
(T-1) Wrench x 1
Using a second person to assist you place Top Frame (A) upside down onto a padded, non-marring surface.
Carefully lower Leg Frame (B) down into position on Top Frame (A) as illustrated. Secure Leg Frame (B) to Top
Frame (A) using Medium Bolts (H-2), Lock Washers (H-4) and Flat Washers (H-5), stacking the hardware in the
order shown. Engage all bolts by hand, then fully tighten using Wrench (T-1).
Carefully lower the Support Stretcher (C) down into position on Top Frame (A) as illustrated. Secure the Support
Stretcher (C) to Leg Frame (B) using Short Bolts (H-2), Lock Washers (H-4) and Flat Washers (H-5); and secure
the Support Stretcher (C) to Top Frame (A) using Long Bolts (H-3), Lock Washers (H-4) and Flat Washers (H-5);
stacking the hardware in the order shown. Engage all bolts by hand, then fully tighten using Wrench (T-1).
(H-1) Short Bolt x 2 (H-4) Lock Washer x 4
(H-5) Flat Washer x 4
(T-1) Wrench x 1
(H-3) Long Bolt x 2
B
A
H-2
H-4
H-5
H-1
H-4
H-5
T-1
H-3
H-4
H-5
T-1
C
B
A
B
x12
x2x2
T-1
DO NOT insert bolts
in middle holes
B
NOTE: DO NOT insert bolts in middle holes.

Step 3
Page 6
NOTE: Levelers can be used
for adjustment if needed.
Using a second person to assist you, carefully turn The Assembled Unit upright.
Assembly is now complete and the table is ready for use.
NOTE: Levelers can be used for additional adjustment if needed.
NOTE: It is recommended to have a second person assist your during this assembly step.
ADJUSTABLE LEVELER

Page 7
Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Do not place furniture in direct sunlight.
Do not place furniture near heating or cooling vents.
Do not write on furniture without a padded barrier to protect the surface.
Do not place furniture outside. For indoor use only.
Not for commercial use. For residential use only.
Dust and pick-up spills using a clean,non-colored, lint-free cloth.
Cleaner
Care & Maintenance