World Market Formentera Occ 566545 User manual

Formentera Occ Chair
Assembly Instructions
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOM ER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
Page 1
SKU–566545

Page 2
Component List
LABEL DESCRIPTION QTY
BACK RESTA 1
B
1
PICTURE
C
1
SEAT
D
E
F
1
LEFT FRAME
RIGHT FRAME
1
BACK CUSHION
SEAT CUSHION 1
LABEL Q’TY
H-3
H-4
DESCRIPTION PICTURE
x4
x2
ALLEN KEY
WOOD PLUG
Ø14/Ø17x8mm
LABEL Q’TY
H-1
H-2
DESCRIPTION PICTURE
x4
x6
8x40
8x50
SHORT ALLEN BOLT
LONG ALLEN BOLT

A
B
Assembly Preparation
Before Beginning:
Page 3
• Have 2 adults on hand for assembly-
• Save all packaging until finished-
• Assemble on a clean non-marring surface (packing fo am)-
• Do not assemble on flooring or carpet-
• In case of missing parts, please contact your neare st Cost Plus World
Market store or call our customer service call cent er at call 1-877-967-5362.
• Read instructions, cover to cover-
• Unpack all hardware bags and components to ensure y ou have all parts-
C
D
E
F

H-4
H-1
Assembly Steps
Step 1
Page 4
(H-1) ALLEN BOLT 8x50 x4
(H-4) ALLEN KEY x1
Step 2
(H-2) ALLEN BOLT 8x40 x2
A
B
C
H-1
H-1
H-4
H-1
H-4
H-4
H-2
DH-4
H-2
H-2
H-2
H-4
H-4
H-1
(H-1) ALLEN BOLT 8x50 x2
(H-4) ALLEN KEY x1
(H-2) ALLEN BOLT 8x40 x2
- Attach the Back Rest (A) to Seat (B) with Long Allen Bolts (H-1) by using Allen Key (H-4).
- Attach the Left Frame (C) to Back Rest (A), with Short Allen Bolts (H-2) using Allen Key (H-4).
- Attach the Seat (B) to Left Frame (C) , with Long Allen Bolts (H-1) using Allen Key (H-4).
A
B
C
C
A
B
D
- Fully tighten all bolts using Allen Key (H-4).
- Attach the Right Frame (D) to Back Rest (A), Short Allen Bolts (H-2) using Allen Key (H-4).
- Attach the Seat (B) to Right Frame (D) with Long Allen Bolts (H-1) using Allen Key (H-4).
H-1
H-2

Assembly Steps
Page 5
Step 4
F
E
Step 3
- Place Back Cushion (E) and Seat Cushion (F) on as shown.
Step 5
- ready to use.The Chair is
(H-3) WOOD PLUG x4Ø14/Ø17x8mm
H-3
H-3
H-3
H-3
H-3
- Insert Wood Plug (H-3) into bolt holes and tap gently with hammer until flush to cover all holes as shown.

Page 6
For minor spots wipe with a wet cloth and mild detergent.
Slip covers can also be placed in a washing machine using cold water, mild detergent and
placed on gentle cycle. Do not use bleach. Remove the insert.
Line dry, do not place in the dryer.
We use a higher density foam to ensure the cushions do not break down in the
outdoor elements. Cushions will soften over time.
Flip the cushions to maintain the quality.
Care & Maintenance
• Do not put hot items directly on furniture surface.
• Do not clean furniture with harsh cleansers or polish.
• Do not place furniture near heating or cooling vents.
• Do not write on furniture without a padded barrier to protect the surface.
• Store furniture or use an appropriate furniture cover during cold or
inclement weather
• Dust and pick-up spills using a clean, non-colored, lint-free cloth.
• Stains may be removed with mild soap solution and damp cloth.
• Not for commercial use. For residential use only.
Cushion and slip cover care:
Remove the slip cover from the cushion insert.
Do not wash the cushion insert.
Machine wash in cold water with similar colors using delicate cycle only
Line dry or lay flat.
Warm iron if needed.
•
•
•
•
•
CAUTION
As with any wood, the color may fade if left in direct sunlight or inclement weather.
We recommend using our Outdoor Wood Furniture Finish to help preserve the color
and the performance of the wood.
Available to purchase at our stores or online