World Market Corsica 620612 User manual

Assembly Instructions
2022/08/30
All products sold at World Market are not for commercial use
and are intended for residential use only.
Corsica Dining Table
SKU - 620612

Hardware List
Page 2
Component List
LABEL DESCRIPTION QTY
TABLE TOP PANEL A
LEG
1
B 4
PICTURE
H-4
LABEL Q’TY
H-1
H-2
H-3
DESCRIPTION PICTURE
x8
x8
x8
x1
OPEN WRENCH
HEXAGON NUT
SPRING WASHER
FLAT WASHER
Ø8.5/Ø14x2mm
Ø8.5/Ø20x2mm
Ø8x13mm
C1 PARASOL CAP

A
Assembly Preparation
Before Beginning:
Page 3
B
C
• Have 2 adults on hand for assembly.
• Save all packaging until finished.
• Assemble on a clean non-marring surface (packing fo am).
• Do not assemble on flooring or carpet.
• In case of missing parts, please contact your neare
st
World
Market store or call our customer service call cent er at call 1-877-967-5362.
• Read instructions, cover to cover.
• Unpack all hardware bags and components to ensure y ou have all parts.

Assembly Steps
Step 1
Page 4
Step 2
(H-1) HEXAGON NUT x8
(H-2) SPRING WASHER x8
(H-3) FLAT WASHER x8
(H-4) OPEN WRENCH x1
H-4
H-2 H-3
H-1
x4
Using a second person to assist you, place Bench Seat Panel (A) upside down on a padded, non-marring surface.
Insert bolts on Legs (B) through predrilled holes in corner of apron. Secure bolts with Flat Washers (H-3),
Spring Washers (H-2) and Hexagon Nuts (H-1), stacking the hardware in the order as shown. Loosely install hardware
on both bolts. Fully tighten using Open Wrench (H-4) after all hardware is installed. Repeat for remaining Legs (B).
With the help of a second person, turn upright. Insert Parasol Cap (C). Assembly is complete and ready for use.

Assembly Steps
Step 3
Adjust levelers if needed for stability.
Page 5