World Market DUSTIN 550247 User manual

Dustin Wood & Metal Inlay Cabinet
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
All products sold at World Market are not for commercial use
and are intended for residential use only.
SKU-550247
Page 1
Assembly Instructions
2022.07.07

Page 2
Left Door Panel
Component List
LABEL DESCRIPTION QTY
A
B
C
D
E
F
G
H
I
J
K
L
M
1
1
1
1
1
1
1
1
1
1
3
4
1
Right Door Panel
Middle Door Panel
Top Panel
Back Panel
Bottom Panel
Left Side Panel
Right Side Panel
Left Divider Panel
Right Divider Panel
Adjustable Shelves
Metal Legs
Middle Metal Leg

Page 3
TIPPING KIT CHECK LIST
CODE COMPONENT QTY
01 NYLON RESTRAINT STRAP
2
02 LONGER SCREW 4
03 SHORTER SCREW 4
04 PLASTIC ANCHOR
4
05 MOUNTING BRACKETS 4
LABEL
LABEL DESCRIPTION QTY
H-1 Bolts1/4”x5/8”xØ15mm
Cam Lock Nuts
Cam Lock Screws
Wood Dowels
Wood Screws Ø4 x 15mm
Bolts 5/32 x 12mm
Shelf Pins
Plastic Caps
Allen Key 110mm x 30mm
Screw Driver (Not Provided)
20
20
20
20
28
24
12
20
1 SET
1
1
H-2
H-3
H-4
H-5
H-6
H-7
H-8
T-1
T-2
DESCRIPTION QTY
Hardware
Tool List
01
02
04
03
05

Page 4
Before Beginning:
Unpack all hardware bags and components to ensure you have all parts-.
Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Assemble on a clean non-marring surface (packing foam).
Save all packaging until finished.
In case of missing parts, please contact your nearest World Market
store or call our customer service call center at call 1-877-967-5362.
A
G
C
BF
L X4
MX1
E
I
J
K
K
K
D
H
Assembly Preparation

Page 5
L
L
L
M
L
H-1
H-1
H-1
H-1
FH-1
H-1
(H-1) Bolts1/4”x5/8”xØ15 20 PCS
Step 1
Assembly Steps
(T-1) Allen Key 110mm x 30mm 1 PC
Position Metal Legs (L) and Middle Metal Leg (M) to corners and the center of Bottom Panel (F);
Secure by using Bolts (H-1) and fully tighten all bolts by Allen Key (T-1).
Adjust levelers if
needed for stability.

Page 6
2X
Step 2
(T-2) Screw Driver (Not Provided) 1 PC
(H-2) Cam Lock Nuts 4 PCS
(H-3) Cam Lock Screws 4 PCS
(H-4) Wood Dowels 6 PCS
G
Install Cam Lock Screws (H-3) first then insert the Wood Dowels (H-4) on the Left and Right Side
Panels (G&H). Fit the holes in the edge of the Bottom Panel (F) over the Cam Lock Screws (H-3) and
Wood Dowels (H-4). Install Cam Lock Nuts (H-2) and tighten by turning clockwise using Screw
Driver (T-2). Must follow Cam Lock Nuts (H-2) position before tighten.
H-4
H-3
H-4
H-2
F
H

Page 7
2X
(T-2) Screw Driver (Not Provided) 1 PC
(H-2) Cam Lock Nuts 4 PCS
(H-3) Cam Lock Screws 4 PCS
(H-4) Wood Dowels 6 PCS
Step 3
J
I
G
H
F
F
H-2
H-4 H-3
Install Cam Lock Screws (H-3) first, then insert the Wood Dowels (H-4) on the Bottom Panel (F).
Fit the holes in the edge of the Left and Right Divider Panels (I&J) over the Cam Lock Screws (H-3)
and Wood Dowels (H-4). Install Cam Lock Nuts (H-2) and tighten by turning clockwise using Screw
Driver (T-2). Must follow Cam Lock Nuts (H-2) position before tighten.
UP
UP
UP

Page 8
4X
Step 4
(T-2) Screw Driver (Not Provided) 1 PC
(H-2) Cam Lock Nuts 12 PCS
(H-3) Cam Lock Screws 12 PCS
(H-4) Wood Dowels 8 PCS
Install Cam Lock Screws (H-3) first, then insert the Wood Dowels (H-4) on the Top Panel (D).
Fit the Cam Lock Screws (H-3) and the Wood Dowels (H-4) on the Top Panel (D) to the holes in the
edge of the Left & Right Side Panels (G&H) and Left & Right Divider Panels (I&J). Install Cam Lock
Nuts (H-2) and tighten by turning clockwise using Screw Driver (T-2). Must follow Cam Lock Nuts
(H-2) position before tighten.
H-2
H-4
H-3
D
I
G
JH

Page 9
H-5
E
D
G
G
H-5
Step 5
(T-2) Screw Driver (Not Provided) 1 PC
(H-5) Wood Screws 15 x Ø4 28 PCS
Attach Back Panel (E) into pre-assembled unit (Step 4). Secure using Wood Screws (H-5) and fully
tighten by a Screw Driver (T-2).

Page 10
D
A
C
B
H
Assemble Left Door Panel (A), Right Door Panel (B), and Middle Door Panel (C) to pre-assembled
unit (Step 5). Secure using Bolts (H-6) and fully tighten by a Screw Driver (T-2).
D
A
H-6
H-6
Step 6
(T-2) Screw Driver (Not Provided) 1 PC
(H-6) Bolts 12 x Ø4 24 PCS