World Market 582731 User manual

SKU - 582731
Page 1
Assembly Instructions
THANK YOU FOR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877-967-5362 FOR ASSISTANCE.
R
Marciana Coffee Table

Leg Frame
LABEL PICTURE DESCRIPTION QTY
A
1
LABEL PICTURE DESCRIPTION QTY
H-1 6
Component List
Hardware
H-2
H-3
Wood Cap
2
2
Page 2
B2
Table Top
H-4
1
Allen Key
Allen Bolt
(M8 x 30mm)
Allen Screw
(M6 x 50mm)
C1
Bottom Stretcher

Page 3
Before Beginning:
Assembly Preparation
Unpack all hardware bags and components to ensure you have all parts-
Read instructions, cover to cover-
Have 2 adults on hand for assembly-
Do not assemble on flooring or carpet-
Assemble on a clean non-marring surface (packing foam)-
Save all packaging until finished-
In case of missing parts, please contact nearest Cost Plus World Market
store or our customer service call center 877-967-5362.

TOP
TOP
NOTE:It is strongly recommended that two adults are on hand for the assembly of this product.
Using a second person to assist you, place Table Top (A) upside down onto a padded,
non-marring surface. Install Leg Frame (B) onto Table Top (A) as shown. Secure using
3 Allen Bolts (H-1) and Allen Key (H-3). Engage bolts but do not fully tighten them yet.
Using a second person to assist you, align the pegs on one end of Bottom Stretcher (C)
with the corresponding holes on Leg Frame (B). Secure the stretcher using Allen
Screw (H-2) and Allen Key (H-3) as shown. Engage the screw but do not fully tighten it yet.
Assembly Steps
Page 4
(H-1)
Step 1
(H-3)
Allen Bolt x 3
Step 2
Allen key (H-3)
(H-1)
B
A
(H-2) Allen Screw x 1
B
A
C
(H-2)
(H-3)
(H-3) Allen key x1

TOP
TOP
Using a second person to assist you, repeat Steps 1 and 2 to install the remaining Leg
Frame (B) and attach the other side of Bottom Stretcher (C) as shown. FULLY TIGHTEN all
Allen Bolts (H-1) and Allen Screws (H-2) from Steps 1-3 at this time using Allen Key (H-3).
Using a second person to assist you, carefully turn the assembly upright. Place a Wood Cap
(H-4) into the corresponding hole at the bottom of each Leg Frame (B). Tap it in until secure.
Assembly Steps
(H-3)
(H-1)
Step 3
(H-1)
(H-3)
Allen Bolt x 3
Allen key
Allen Screw x 1
(H-2)
(H-2)
(H-3)
C
B
(H-4) Wood Cap x 2
(H-4)
Step 4
Page 5

NOTE: Levelers can be used for additional
adjustment if needed.
Using a second person to assist you, place the completed assembly into the desired location
and then finalize any leveling adjustments using the adjustable levelers as shown. Assembly is
now complete and the product is ready for use.
CAUTION: Adjust pre-installed levelers only AFTER the unit has been moved into the desired
location for use. DO NOT drag the unit as this may damage the levelers.
Assembly Steps
Step 5
Page 6

CAUTION: As with any wood, the color may fade if left in direct sunlight or inclement weather.
Minor cracking may occur with age. These are naturally occurring features of wood and do
not affect product performance.
We recommend using our Outdoor Wood Furniture Finish sold separately to help preserve
and protect the wood and finish.
Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Do not place furniture near heating or cooling vents.
Do not write on furniture without a padded barrier to protect the surface.
Dust and pick-up spills using a clean, non-colored, lint-free cloth.
Stains may be removed with mild soap solution and damp cloth.
Care & Maintenance
Not for commercial use. For residential use only.
Store furniture or use an appropriate furniture cover during cold or inclement weather.
Page 7