World Tech Toys Havoc User manual

DART BLASTER OVERVIEW:
INSTRUCTION MANUAL
8+
ITEM NO. 33799
LIGHTS
GLOW IN THE DARK SPRING PUMP
TRIGGER
BATTERY COMPARTMENT
PULL BACK SLIDE
FLIP UP SIGHT

LOADING DART BLASTER
Load a single dart into the barrel as shown. To avoid damage to
dart and/or blaster, do not force dart all the way in. About 1/4
of dart should stick out of barrel.
This Blaster has optional light up effects that activate whenever
the trigger is pulled, this requires 3 x AG13/LR44 button cell
batteries.
To install batteries, carefully pry off grip plate as shown starting
at seams of blaster. Use a thin object to work in and pull off
evenly.
Note the polarity (+ and - marks on batteries) and install with all
batteries facing the same direction stacked.
BATTERY INSTALLATION (OPTIONAL)
LR44
AG13
+
LR44
AG13
+
LR44
AG13
+

OPERATING DART BLASTER
GLOW DART CHARGER OPERATION
Pull back the slide all the way until you hear a click sound to
ready the dart blaster. Slide will return to start position, keep
fingers clear.
Squeeze the trigger firmly until the dart fires.
Pull sheet from battery
compartment beneath the
light emitting device. CONTINUED ON BACK
3.
Load darts into clear
cartridge.
1. Insert cartridge beneath
the grooves on the light
emitting devices t-slot.
2.

GLOW DART CHARGER OPERATION (CONT.)
Website: www.worldtechtoys.com
Email: [email protected]
Phone: [phone]
Monday - Friday / 9:00AM - 5:00PM / Pacific Time
WWW.WORLDTECHTOYS.COM
TROUBLESHOOTING DART BLASTER
PROBLEM CAUSE SOLUTION
Blaster does not light up.
Blaster does not fire.
Blaster trigger not working.
Darts are firing inconsistently.
Blaster has obstruction.
Darts are damaged. Replace the damaged darts.
Blasters pull back slide was not
completely pulled back.
Pull back on slide until a click is
heard.
Blasters pull back slide was not
completely pulled back.
Pull back on slide until a click is
heard.
Blaster has obstruction.
Remove dart from barrel and remove
any obstructions.
Blaster barrel is empty. Load blaster with single dart.
Remove dart from barrel and remove
any obstructions.
Blaster batteries are drained. Replace the 3 x AG13/LR44 button
cell batteries located in grip.
Turn on power switch and
charge darts at least
30 seconds to glow.
5.
Open velcro straps on
light emitting device and
secure to wrist.
4.
MADE IN CHINA
SPECIFICATIONS,
COLORS AND CONTENT
MAY VARY FROM ILLUSTRATIONS
CAUTION:
To avoid injuries, do not aim at eyes, face
or animals. Do not modify blaster or darts.