F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE
UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
X10WirelessTechnology,Inc.LimitedOneYearWarranty
X10.com, a division of X10 Wireless Technology, Inc. (X10) warrants X10
productstobefreefromdefectivematerialandworkmanshipforaperiodofone
(1)yearfromtheoriginaldateofpurchaseatretail.X10agreestorepairorreplace,
atitssolediscretion,adefectiveX10productifreturnedtoX10withinthewarranty
periodandwithproofofpurchase.Ifserviceisrequiredunderthiswarranty:
Forhelpormoreinformationonsetup,pleasevisit:
http://www.x10.com/support
Key Chain Remote KC674
INSTALLATION AND OPERATING INSTRUCTIONS
1. OpenthebatterycompartmentanduseasmallscrewdrivertosettheHousecode
dialtomatchtheX10ModulesandTransceiveryouwanttocontrol.
2. Settheslideswitchinsidethebatterycompartmenttocontrolmodulessetto
UnitCodes 1 and 2,OR 5 and 6from the two buttonson the KC674.
3. Install 2 AAA alkaline batteries (sold separately) in the KC674’s battery
compartment.Observepolarity.
4. PluginanX10Transceiver(RR501orTM751,soldseparately).
6. PressthecorrespondingONorOFFbuttontoturnX10ModulessettoUnit
Codes1and2,OR5and6onandoff.Button1(or5)controlstheTransceiver.
Button2(or6)transmitstotheTransceiverwhichthenretransmitstootherX10
Modules (set to 2 or 6).
KC674-11/02
