Xantrex TR1512-120-60 User manual

TraceSeries
Inverter/Charger
TR1512-120-60
TR2412-120-60
TR1524-120-60
TR2424-120-60
TR3624-120-60
TR1512-230-50
TR1524-230-50
TR2424-230-50
Installation Manual
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html

http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html

This manual for use by qualified installers only
TraceSeriesInverter/Charger
Installation Manual
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html

AboutXantrex
Xantrex Technology Inc. is a world-leading supplier of advanced power electronics and controls with products from small
mobile units to utility-scale systems for wind, solar, batteries, fuel cells, microturbines, and backup power applications in
both grid-connected and stand-alone systems. Xantrex products include inverters, battery chargers, programmable power
supplies, and variable speed drives that convert, supply, control, clean, and distribute electrical power.
Trademarks
Trace Series Inverter/Charger is a trademark of Xantrex International. Xantrex is a registered trademark of Xantrex
International.
Other trademarks, registered trademarks, and product names are the property of their respective owners and are used
herein for identification purposes only.
Noticeof Copyright
Trace Series Inverter/Charger Installation Manual © December 2007 Xantrex International. All rights reserved.
Exclusion for Documentation
UNLESS SPECIFICALLY AGREED TO IN WRITING, XANTREX TECHNOLOGY INC. (“XANTREX”)
(A)MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR OTHER
INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION.
(B)ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES, WHETHER SPECIAL, DIRECT,
INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF
ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’SRISK; AND
(C)REMINDS YOU THAT IF THIS MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH STEPS HAVE BEEN
TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION, THE ACCURACY CANNOT BE GUARANTEED. APPROVED
XANTREX CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE VERSION WHICH IS POSTED AT WWW.XANTREX.COM.
DateandRevision
December 2007 Revision A
PartNumber
975-0367-01-01
ProductNumber
TR1512-120-60, TR2412-120-60, TR1524-120-60, TR2424-120-60, TR3624-120-60, TR1512-230-50, TR1524-230-50,
TR2424-230-50
ContactInformation
Telephone: [phone] (toll free North America)
1 408 987 6030 (direct)
Fax: [phone] (toll free North America)
1 360 925 5143 (direct)
Email: [email protected]
Web: www.xantrex.com
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html

975-0367-01-01 iii
This manual for use by qualified installers only
AboutThisManual
Purpose
The purpose of this Installation Manual is to provide explanations and procedures
for installing the Trace Series Inverter/Charger.
Scope
The Manual provides safety guidelines, detailed planning and setup information,
and procedures for installing the inverter. It does not provide details about
particular brands of batteries. You need to consult individual battery
manufacturers for this information.
Audience
The Manual is intended for use only by qualified installers when installing the
Trace Series Inverter/Charger. Installers must be certified technicians or
electricians as this manual may not contain all required details and information
necessary for a safe and code compliant installation.
Organization
This Manual is organized into two chapters and one appendix.
Chapter 1, “Planning” contains information to pre-plan your installation of the
Trace Series Inverter/Charger.
Chapter 2, “Installation” contains information about how to plan for and install
the Trace Series Inverter/Charger.
Appendix A, “Specifications” contains information about the electrical,
environmental and regulatory specifications of the Trace Series Inverter/Charger.
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html

AboutThisManual
iv 975-0367-01-01
This manual for use by qualified installers only
ConventionsUsed
The following conventions are used in this guide.
ModelNumbering
This Manual contains information for eight models of the Trace Series Inverter/
Charger.
Within this Manual, if information applies to all models of the Trace Series
Inverter/Charger then they will be referred to as the Trace Series. If information
only applies to select models then the model number will be referenced as shown
in the table below. Make sure you know which model Trace Series Inverter/
Charger you have purchased.
WARNING
Warnings identify conditions or practices that could result in personal injury or loss of life
CAUTION
Cautions identify conditions or practices that could result in damage to the unit or other
equipment.
Important: These notes describe things which are important for you to know, but not as
serious as a caution or warning.
ModelNumberInputVoltagePower
Battery Bank
OperatingVoltageFrequency
TR1512-120-60 120 Vac 1500 VA 12 Volt 60 Hz
TR2412-120-60 120 Vac 2400 VA 12 Volt 60 Hz
TR1524-120-60 120 Vac 1500 VA 24 Volt 60 Hz
TR2424-120-60 120 Vac 2400 VA 24 Volt 60 Hz
TR3624-120-60 120 Vac 3600 VA 24 Volt 60 Hz
TR1512-230-50 230 Vac 1500 VA 12 Volt 50 Hz
TR1524-230-50 230 Vac 1500 VA 24 Volt 50 Hz
TR2424-230-50 230 Vac 2400 VA 24 Volt 50 Hz
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html

AboutThisManual
975-0367-01-01 v
This manual for use by qualified installers only
AbbreviationsandAcronyms
RelatedInformation
You can find more information about Xantrex Technology Inc. as well as its
products and services at www.xantrex.com.
AC Alternating Current
ASC Authorized Service Center
COM Communications Port
DC Direct Current
PV Photovoltaic
RE Renewable Energy
RMA Return Material Authorization
Trace Series Trace Series Inverter/Charger
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html

vi
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html

975-0367-01-01 vii
This manual for use by qualified installers only
IMPORTANTSAFETYINSTRUCTIONS
SAVETHESEINSTRUCTIONS
THISMANUALCONTAINSIMPORTANT
INSTRUCTIONSTHATSHALL BE FOLLOWED
DURING INSTALLATION OFALL TRACE
SERIESINVERTER/CHARGERMODELS.
General
1. Before installing and using the Trace Series Inverter/Charger, read all
instructions and cautionary markings on the Trace Series Inverter/Charger and
all appropriate sections of this guide and the Trace Series Inverter/Charger
Operation Manual (Part #: 975-0391-01-01). Be sure to read all instructions
and cautionary markings for any equipment attached to this unit.
2. This unit is designed for indoor use only. Do not expose the Trace Series
Inverter/Charger to rain, snow, or spray.
3. To reduce risk of fire hazard, do not cover or obstruct the ventilation
openings. Do not install the Trace Series Inverter/Charger in a zero-clearance
compartment. Overheating may result.
4. Transformerless battery chargers are not to be used with this product family
due to the possible overheating and damage to the charger.
5. Use only attachments recommended or sold by the manufacturer. Doing
otherwise may result in a risk of fire, electric shock, or injury to persons.
6. To avoid a risk of fire and electric shock, make sure that existing wiring is in
good condition and that wire is not undersized. Do not operate the Trace
Series Inverter/Charger with damaged or substandard wiring.
7. Do not operate the Trace Series Inverter/Charger if it has received a sharp
blow, been dropped, or otherwise damaged in any way. If the Trace Series
Inverter/Charger is damaged, see the Warranty section.
WARNING: Limitationson use
The Trace Series is not intended for use in connection with life support systems or other
medical equipment or devices.
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html

S afety
viii 975-0367-01-01
This manual for use by qualified installers only
8. Do not disassemble the Trace Series Inverter/Charger. It contains no user-
serviceable parts. See Warranty for instructions on obtaining service.
Attempting to service the Trace Series Inverter/Charger yourself will void
your warranty and may result in a risk of electrical shock or fire. Internal
capacitors remain charged after all power is disconnected.
9. The Trace Series contains more than one live circuit (batteries and AC line).
Power may be present at more than one source or from more than one
location. To reduce the risk of electrical shock, disconnect both AC and DC
power from the Trace Series Inverter/Charger before attempting any
maintenance or cleaning or working on any circuits connected to the Trace
Series Inverter/Charger. Turning off controls will not reduce this risk.
10. Use insulated tools to reduce the chance of short-circuits when installing or
working with the inverter, the batteries, or a PV array.
11. Several diagrams contained within this manual are basic in nature and are
included only to depict different installation options. All details may not be
shown, and as such, local electrical codes must still be referenced.
WiringRequirements
1. The Trace Series is designed to be permanently connected to the AC and DC
electrical systems. Xantrex recommends that all wiring be done by a certified
technician or electrician to ensure compliance with the local and national
electrical codes relevant to your installation. It is the responsibility of the
installer to ensure that the installation of the Trace Series complies with all
relevant electrical codes.
2. All wiring methods and materials shall be in accordance with local electrical
codes. When sizing conductors and conduits interfacing to the Trace Series,
both shall be in accordance with all state and local code requirements.
3. This product is intended to be installed as part of a permanently grounded
electrical system. This is the single point earth ground for the inverter system.
4. Use copper conductors only with insulation rated for 90°C (or higher).
5. The grounds on the Trace Series are marked with this symbol:
6. The AC voltage and current on the Trace Series is marked with this symbol:
WARNING FireHazard:
Do not install 120 volt AC stand-alone inverters onto 120/240 volt AC multi-branch
circuit wiring. This could pose a fire hazard due to an overloaded neutral return wire in
this configuration. See the Application Note titled “Multi-wire Branch Circuit Issues” on
the Xantrex website for additional information and possible solutions.
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html