Xerox Phaser 4500 Manual

Phaser™ 4500 Laser Printer
Copyright © 2004 Xerox Corporation. All Rights Reserved.
2-26
2-Sided Printing
This topic includes:
■"Automatic 2-Sided Printing" on page 2-26
■"Binding Preferences" on page 2-26
Automatic 2-Sided Printing
Guidelines
■A duplex unit must be installed on your printer to perform automatic 2-sided printing. The
4500B and 4500N configurations may be upgraded to include this feature.
■To print a 2-sided document, verify that you are using the following ranges:
Binding Preferences
Use the printer driver to select Portrait or Landscape orientation for the images on the page.
When you print 2-sided jobs, select the binding preference which determines how the pages
turn.
To perform automatic 2-sided printing:
1. Insert paper into the tray. For more information, go to Reference/Printing/Basic Printing
on the User Documentation CD-ROM.
Tray 1 Trays 2–4
Width 90 – 216 mm
3.5 – 8.5 in. 98 – 216 mm 3.9 – 8.5 in.
Length 140 – 356 mm
5.5 – 14 in. 148 – 356 mm 5.8 – 14 in.
Paper Weight 60 – 216 g/m2 (16 – 130 lb.) 60 – 216 g/m2 (16 – 130 lb.)
Portrait
Bind on Side Edge
Flip on Long Edge
Portrait
Bind on Top Edge
Flip on Short Edge
Landscape
Bind on Side Edge
Flip on Short Edge
Landscape
Bind on Top Edge
Flip on Long Edge

Phaser™ 4500 Laser Printer
2-27
2. In the printer driver:
■Select either Portrait or Landscape orientation.
■Select 2-sided printing as described in the table below.
3. Click OK to accept the printer driver settings, then click OK to print.
Setting the Printer Driver for 2-Sided Printing
Operating System Steps
Windows 98 or
Windows Me
1. Select File, then select Print.
2. Click Properties.
3. On the Setup tab, then select Print on 1 Side or Print on 2 Sides.
4. Select or deselect Bind On Top Edge.
Windows 2000,
Windows XP, or
Windows Server 2003
1. Select File, then select Print.
2. Click Properties.
3. On the Layout tab in Print On Both Sides (Duplex), select Flip on
Long Edge or Flip on Short Edge.
4. Select number of pages in the Pages Per Sheet drop-down list.
Windows NT 1. Select File, then select Print.
2. Click Properties.
3. On the Page Setup tab in Print On Both Sides (Duplex), select Flip
on Long Edge or Flip on Short Edge.
Mac OS 9 1. Select File, then select Print.
2. Select Layout.
3. Select Print on Both Sides.
4. Click the Binding icon that matches the edge to bind.
Mac OS X, version
10.1 (and higher)
1. Select File, then select Print.
2. Select Duplex.
3. Select Print on Both Sides.
4. Click the Binding icon that matches the edge to bind.