Xpand X105-RF-X1 User manual

XPAND 3D Glasses Lite (RF)
Model No. X105-RF-X1 (3D Glasses)
User Guide

© XPAND, All Rights Reserved. 1 www.xpand.me
Glasses Overview
(1) Button (ON, OFF, Pairing) – located on the inner side of the right earpiece.
(2) LED – located on the outer side of the right earpiece, near the earpiece hinge.
What's Included
»(1 piece) Active 3D Glasses
»(1 piece) Charging cable (USB)
Turning ON Your Glasses
»Shortly press button (1) once.
»Red LED (2) will light up from off to bright.
»If the glasses cannot find a 3D host (like a 3D TV or a 3D emitter) within a few
seconds, LED (2) will dim from bright to off and the glasses will automatically
shut down. If the glasses do find the 3D host, they will automatically connect to
it, indicated by lit LED (2) lighting up for 1 second.
Turning OFF Your Glasses
»Shortly press button (1) once.
»Red LED (2) will light up brightly and then dim from bright to off.
»The glasses will shut down.
Proximity Association with 3D Host
Please note that XPAND 3D Glasses Lite RF can only pair with RF devices such as
Bluetooth® / RF enabled TV’s and RF emitters. They do not work with IR (InfraRed)
3D TV’s or IR emitters.

© XPAND, All Rights Reserved. 2 www.xpand.me
This procedure shall be followed every time the glasses are introduced to a new 3D
host. During the proximity association, the 3D glasses shall be located within 3ft (1m)
from the 3D host (3D TV, 3D Emitter…).
»Turn on the glasses.
»LED (2) will light up from off to bright, indicating the glasses are turned on.
»Press button (1) for at least 1 second.
»After 1 second, the LED (2) will start to blink with a rate of 1 blink per 2 seconds.
»Release button (1).
»Successful proximity association is indicated with 6 short LED (2) blinks.
»If the glasses could not associate with the 3D host, the LED (2) will dim from
bright to off and glasses will turn off.
Connecting Your Glasses to 3D Host
Once the glasses are associated with the 3D host, they will automatically connect
to that host every time they are turned on. In case the glasses lose the connection
with the 3D host during operation, they will automatically try to reconnect to that
host (LED (2) is blinking with a rate of 1 blink per 2 seconds). If the glasses cannot
successfully reconnect to the 3D host within 60 seconds LED (2) will dim from bright
to off and the glasses will automatically turn off.
Set Glasses to Operate in Dual View Mode
With the selection of Dual View Mode, the XPAND 3D Glasses Lite can be used for
dual gaming. Dual View Mode can be used during normal 3D viewing as well to
disable 3D viewing for people that face an uncomfortable feeling when watching 3D.
When the 3D host is emitting the dual view signal, double click on button (1) to
change Dual View Mode between player 1 and player 2.
Not all 3D host devices support a dual view signal. When the 3D host is emitting a
normal 3D signal, double click on the button (1) to change between player 1, player
2 and normal 3D viewing mode.
When a double click is detected, the LED (2) will indicate the eyewear mode:
Player 1: One Quick Blink
Player 2: Two Quick Blinks
Normal 3D*: One Long Blink
*Accessible only if the 3D device is not emitting dual view signal.

© XPAND, All Rights Reserved. 3 www.xpand.me
Indicating the Battery State
»If LED (2) flashes every couple of seconds during the operation, this indicates
that the battery level is low.
»Charging is indicated by a continuously lit LED (2).
Charging the Battery
To charge the battery of the glasses, use the micro USB cable to connect the USB
charging port on the glasses to a powered USB port (on a computer or a wall charger
with USB compliant output). LED (2) will stay brightly lit until charging is completed.
Charging usually takes up to two hours.
Please, fully charge the glasses prior to the first use.
Please note that the glasses can’t be used during charging!
Technical Specifications
3D Technology: Active Shutter Glasses
Lens type: LCD, TN cell
Sync Method: RF (Radio Frequency, NOT InfraRed)
Shuttering Frequency: 96 Hz to 144 Hz
Operating Temperature: 5 – 45° C
Battery Life: more than 100 hours
Battery Type: Rechargeable Lithium-ion Polymer cell
Frame Specifications
Lens Size: 2,2” diagonal (58 mm)
Weight: 1.3 oz (37 g)
Dimensions (W x H x D): 6.7” x 1.6” x 6.5” (170 mm x 40 mm x 165 mm)
Frame Colour: Black

© XPAND, All Rights Reserved. 4 www.xpand.me
ATTENTION – Consult
Accompanying Documentation
Important Safety Instructions
»Read these instructions.
»Keep these instructions.
»Heed all warnings.
»Follow all instructions.
»Do not use this apparatus near water.
»Clean only with dry cloth.
»Only use the attachments/accessories specified by the manufacturer.
Battery
The 3D Glasses Battery is not user replaceable.
WARNING, Battery May Explode If Mistreated. Do Not Disassemble, Or Dispose of
In Fire.
Viewers need to refer to the recommendations described below.
»Stop watching moving images, if you have any symptoms of headache,
dizziness, nausea, malaise and any uncomfortable feelings that might be caused
by the images. It is advisable to take a break for 5 min to 15 min every hour,
even if the symptoms are not experienced.
»Make the viewing conditions comfortable by:
• adjusting the illumination, sound and air conditioning in the room;
• adjusting the height of the chair and desk to suit your physique;
• adjusting the brightness, focus or any other parameters of your display terminal
or operating devices.
»Guardians are encouraged to protect their children’s health by controlling viewing
conditions.
»Avoid unnecessary fatigue caused by overwork or lack of sleep, before watching
visual products.
»When watching stereoscopic images, do not incline your head relative to the
horizontal direction of the images.
»Stop watching stereoscopic images if you notice double images. It is important
that display devices be adjusted appropriately.
»The recommendations described in this list may apply to some visual products
more than others.

© XPAND, All Rights Reserved. 5 www.xpand.me
Regulatory Compliance Statements
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation
Caution: Any changes or modifications to this equipment not explicitly approved by
X6D Limited shall void the user’s authority to operate it.
Hereby X6D Limited declares that the X105-RF-X1 (3D Glasses) are in compliance
with the essential requirements and other relevant provisions of the Directive
1999/5/EC. The declaration of conformity may be consulted at http://www.xpand.
me/products/xpand-3d-glasses-lite/declaration-of-conformity/
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Technical Support
For direct support with XPAND Consumer products please contact us at:
(+1) 888.906.1190 or [email protected]