Silhouette SPX SIGNIA User manual

SPX SIGNIA

Inclination
InclinationInclination
Inclination
3. Enclose temple edge firmly and
adjust inclination on titanium side
part into requested direction
1. old lens fixation firmly with
mounting pliers
2. Open temple

Adjust
AdjustAdjust
Adjust Temple
Temple Temple
Temple Opening
OpeningOpening
Opening
Reduce Enlarge

Temple
Temple Temple
Temple Disassembly
DisassemblyDisassembly
Disassembly
PRESSPRESS
−Close temple
−Press it through
−Lift it out of hinge
PRESSPRESS

Greasing
GreasingGreasing
Greasing inge
inge inge
inge with
withwith
with Teflon
TeflonTeflon
Teflon
After cleaning grease inside loop of hinge with
Teflon igh-Precision-Lubricant P 0030.
Afterwards mount temple.

Temple
Temple Temple
Temple Assembly
AssemblyAssembly
Assembly
−Position titanium side part at temple
−press it against safe edge of table
−and press it in.

Temple
Temple Temple
Temple Adjustment
AdjustmentAdjustment
Adjustment
−Curve temple in large moves.
−Metal needle inside temple enables „cold“ adjustment of temple end.
−If necessary slight heatening to max. 70°C possible.
−Never bend!