XPOtool 61344 User manual

User’s manual
Spray Gun with Tank
61344
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

https://www.XPOtool.com Item 61344 Page 2
The Tool Experts
03 2023-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler – Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]

https://www.XPOtool.com Item 61344 Page 3
The Tool Experts
03 2023-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•Modifications due to technical progress can be made by the manufacturer without advance no-
tice and may not be considered yet in this user’s manual.
•Before use, check the device for completeness, functionality, and tightness.
•Never use a damaged or dysfunctional device. Have the device checked by a qualified repair-
man.
•When performing any work with the device, wear protective equipment such as working gloves,
sturdy shoes, respiratory protection, hearing protection, etc.
•Make sure that the work zone is always well illuminated and ventilated.
•Always make sure that parts of your body or clothes cannot get near dangerous zones while
working.
•Never point the spray gun towards persons, animals, or sources of heat.
•Avoid any unintentional starting of the trigger when not using the device.
•Keep children and casual bystanders away from your work zone.
•Always work with care and the attention required.
•Never apply excessive force when using the device.
•Make sure to have a good and safe stand when using the device.
•Only use pressurised air as pressure source, never use gases such as oxygen as pressure
source.
•Disconnect the pressurised-air supply when the device is not in use.
•Never carry the device on its pressurised-air hose.
•Do not perform work with this product when being tired or influenced by alcohol, drugs, or med-
icine.
•Only keep packing material (films, plastic bags, polystyrene, etc.) out of children’s, in particular
babies’ reach. Packing material hold dangers that might not be visible. Danger of suffocation!
Intended use
•The spray gun with tank is designed for the pulverisation of certain material.
•The spray gun with tank is NOT designed for the pulversation of paint.
Commissioning
•The device comes pre-assembled except its handle.
•Screw the side handle to the device.
•For commissioning the deivce, a pressurised-air compressor is required (not included in the
scope of delivery).
•Make sure that the compressor is switched off.
•Fill the tank with spray material and screw the gun onto the tank. The gaskets must be tight.
•If required, connect the appropriate probe in front of the gun.
•Connect the pressurised-air hose of your compressor to the pressurised-air connector of the
spray gun.
•Actuate the trigger to commission the gun.
•After work, the pressurised-air hose should be disconnected from the gun.

https://www.XPOtool.com Item 61344 Page 4
The Tool Experts
03 2023-1
Maintenance
•Before every use, make sure that there is no condensed water inside the pressurised-air hoses.
•Empty the tank completely after finishing work.
•For cleaning, never use aggressive detergents.
•Wipe the device clean with a dry, clean cloth.
•Store the device in a dry and clean spot, away from frost.
Technical specifications
Working pressure (㍴)
4–6
Max. pressure (㍴)
7
Volume of tank (mℓ)
1100
Length of hose, round nozzle (㎝)
105
Length of hose, hooked nozzle (㎝)
115
Parts list and exploded view
№
Name
Qty.
№
Name
Qty.
1
Gun housing
1
24
Rubber sleeve
1
2
O-ring (8×1.8)
11
25
Gasket (1)
2
3
Pressurised-air connection
(¼″)
1
26
Air tube
1
4
Trigger support
1
27
Material tube
1
5
Trigger spring
1
28
Gasket (2)
1
6
Trigger screw
1
29
Material nozzle
1
7
Sealing ring
1
30
Connecting piece
1
8
Air valve rod
1
31
Connecting piece
2
9
Flat gasket (4)
1
32
Lock nut
2
10
Air valve rod gasket
2
33
Material tube
2
11
Air valve rod support
1
34
Handle piece
1
12
Air valve spring
1
35
Screw M5×5
1
13
O-ring (10×1.8)
1
36
Nozzle
1
14
Gasket screw
1
37
Connection piece support
11
15
Needle spring
2
38
Nozzle
1
16
Trigger
1
39
Valve seat
1
17
Trigger bolt
1
40
Steel ball S⌀4.2
1
18
Stopper
1
41
Valve spring
1
19
Needle seat
1
42
Valve screw
1
20
Needle
1
43
Material tube
1
21
Gasket
2
44
Gasket (sealing)
1

https://www.XPOtool.com Item 61344 Page 5
The Tool Experts
03 2023-1
22
Gasket (sealing)
1
45
Cup
1
23
Gasket (4)
1
Important note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.