XtendLan DPM-D246-IP User manual

OPERATION MANUAL
Version 1.0 / 201704
4 inch Guard Station
2 WIRE IP SYSTEM
COLOR TFT TOUCH SCREEN WITH HANDSET
• Please read this manual carefully before using the product you purchase,and keep it well for future
use.
• Please note that images and sketch maps in this manual may be different from the actual product.
REC
2

PRECAUTIONS
• Slotsoropeningsinthebackofthemonitor,areprovidedforventilationand
toensurereliableoperationofthevideomonitororequipmentandtoprotectif
fromoverheating.Theseopeningsmustnotbeblockedorcovered.Themonitor
shouldneverbeplacednearoroveraradiatororheatregisterandshouldnotbe
placedinabuilt-ininstallationsuchasabookcaseunlessproperventilationis
provided.
• Allpartsshouldbeprotectedfromviolencevibration.Andnotallowbeimpacting,
knockinganddropping.
• ForcleantheLCDscreen,usinghandsorwetclothisforbidden.
• Pleasedothecleannesswithsoftcottoncloth,pleasedonotusetheorganicor
chemicalcleanimpregnate.Ifnecessary,pleaseusepurewaterordilutesoap
watertocleanthedust.
• Imagedistortionmayoccurifthevideodoorphoneismountedtooclosetomag-
neticfielde.g.Microwaves,TV,computeretc.
• Pleasekeepawaythevideodoormonitorfromwet,hightemperature,dust,and
causticandoxidationgasinordertoavoidanyunpredictabledamage.
• DoNOTopenthedeviceinanycondition,calltheadministratorforhelpifthereis
anyproblemormulfunctionhappens.

CONTENTS
PARTS AND FUNCTIONS ..................................................................................... 4
Part Names............................................................................................................. 4
Mounting................................................................................................................. 5
Screen .................................................................................................................... 6
BASIC OPERATIONS............................................................................................ 7
Answering a call ..................................................................................................... 7
Basic operation based on Namelist........................................................................ 8
Select a user or a Guard Station to be called.................................................... 8
Select a video door station to be monitored ...................................................... 9
Select a door station to be released the lock..................................................... 9
Basic operation by Input code ............................................................................... 10
Call a user or a Guard Station.......................................................................... 10
Monitor a video door station ............................................................................. 10
Release a door lock.......................................................................................... 11
Recording .............................................................................................................. 11
Viewing videos....................................................................................................... 12
Viewing calling records.......................................................................................... 13
SETUP INSTRUCTIONS....................................................................................... 14
Setting date and time............................................................................................. 14
Setting monitor time............................................................................................... 14
Setting ring tone & ring volume ............................................................................. 15
Setting IP address ................................................................................................. 15
Specication .......................................................................................................... 16

-4-
PARTS AND FUNCTIONS
Key functions
NO. Item Description
[1] Color LCD touch screen •See the menu details
•Display videos and images
[2] Handset Pick up to answer the call
[3] Monitor button Monitor the video from the selected Door Station
[4] Manual record button Press to capture videos
[5] Close button •Press to open/close the main menu page.
•End the communication,monitoring, or call.
[6] Mute button Reserve
[7] Home button Press to return to main menu page
[8] Call button Press to call the users or other Guard Stations
[9] Unlock button Press to release the door lock
[10] Transfer button Reserve
[11] Missed call button •Light up when having missed call
•Press to open the missed call records in shortcut
[12] Speaker Send out sounds of ring tones,audio and alarms
[13] Power switch Press to power off/on for the unit
[14] SD card slot Use to insert micro-SD card(SD card not included)
Part Names
REC
2
[1]
[13]
[14]
[2]
[3]
[4]
[5]
[6]
[12]
[8]
[7]
[10]
[11]
[9]
* Monitor/Home/Call/Manual record/Unlock button will be light up when power on for the unit.

-5-
The installation height is suggested to 145~160cm.
1. Use screws to fasten the mounting bracket to the wall with mounting box.
2. Connect the power to the unit.
3. Mount the unit to the mounting bracket, make sure the magnet on the unit is absolutely
attached to the mounting bracket.
4. Final view.
PARTS AND FUNCTIONS
Terminal description
1 2 3 4
2 wire cable
Mounting screw
x 2(included)
Mounting bracket
The unit
Mounting box
(size:86x86mm)
POWER
L1
L2
RS485
RELAY
CRJ45
L1,L2: Power input,no polarity.
RS485: Reserve.
RELAY: Reserve.
CRJ45: RJ45 converter terminal,
connect to Ethernet.
Mounting

-6-
PARTS AND FUNCTIONS
The Main menu is your starting point for using all the applications on your monitor.
Press [Home] button or touch anywhere of the screen on monitor in standby mode, the
Main menu will appear as follow:
On Main menu page,touch [Input Mode] icon to display the Search screen.
Main screen
SETTINGS
Touch it to enter setup page.
MONITOR
Touch it to enter
video resource page.
EVENT
Touch it to review
the calling records
and memo infos.
INPUT MODE
Touch it to show the keypad.
UNLOCK
Touch it to enter lock
resource page.
INTERCOM
Touch it to enter intercom
selections.
Current date and time.
Input box
Digital keypad
Serach screen
Return to Main menu page.
Press to switch to Search result.
Press to switch to Char keypad.
Press to delete the input.
Screen
_

-7-
00:10 [9002]CDS2
PARTS AND FUNCTIONS
Displays calling source.
Shows status of talking,
unlocking ect.
Displays while recording.
Displays talking time.
If the calling source is
a Video Door Station,
video will be displayed.
Communication screen
Touch it to end the talk-
ing and close the screen.
Answering a call
REC
2
00:10 [9002]CDS2
• Whenreceivingacall,thecalltone
sounds,videowillbedisplayedonthe
screenifthesourceisaVideoDoor
Station,andonevideowillberecorded
for10secondsautomaticallyifthereis
video.
• Pickuphandsettocommunicatewith
thecallerfor90seconds.
• Whilecommunication,press / 
[Unlock]buttontoreleasethecorre-
spondingdoorlock.
• Whenthecommunicationends,hang
uphandsetorpress [Close]button.
1.Ifnobodyanswersthecall,thescreenwillbeturnedoffautomaticallyafter30seconds.
2.TheimagewillnotbedisplayedwhenreceivingacallfromUserorOtherGuardStation.
3.Manualrecordingisforbiddenduringautorecording.
4.Whilereceivingacall,othercallingisforbidden.
5.Communicationalsoendsautomaticallyafter90seconds.

-8-
BASIC OPERATIONS
In default, the Namelist is not included.It should be configured by specific software.The
following instructions is in the condiction of the namelist is created.
1.On Main menu, touch [Intercom]
icon to display Namelist. Touch icon
to switch between User List and Guard
Station List.
2.Select a Name by touching it,calling is
activated immediately.No image will be
displayed on screen.
Basic operation based on Namelist
1.Select a User or a Guard Station
to be called
3.If nobody answers the call within 30
seconds,it will stop calling automatically
and shut off the screen.Or touch
icon to stop calling directly.
4.If the call is answered,communication
is starting.
5.When the communication ends, hang
up handset or press [Close] button.
Scrolltonextpage.
Scrolltolastpages.
SwitchbetweenUserandGuardStationList.
ReturntoMainmenupage.
User List
Guard Station List

-9-
1.On Main menu, touch [Monitor] icon
to display Video resource list.
1.On Main menu, touch [Unlock]
icon to display Door Station list.
BASIC OPERATIONS
2.Select a Video Door Station
to be monitored
Select a door station to be
released the lock
2.Select a Video Door Station by touching
it,minitoring is activated immediately.The
monitor time is 30 seconds.
2.Select a Door Station by touching it,
then press / [Unlock] button
to release the corresponding lock.
3.If the door is open,the screen will pop-
up a box of unlocking. If unlocking is
failed,the screen will pop-up a box of
device connection error, see as follows:
3.The image of outdoor condiction will be
displayed on screen,see as follow:
4.During monitoring, these operations are
available:
-Pick up handset to talk with visitor;
-Press / [Unlock] button to release
the door lock;
-Press [Manual record] button to record
videos.
-Press [Close] button to end monitoring.
00:10 [9002]CDS2

-10-
BASIC OPERATIONS
The another way to activate the functions of calling, monitoring, unlocking is by inputting code
via the keypad on screen. There are two different types of code: Default code and Room code.
Default code: logical device address,set by DIP switch.
Room code: congured by software. In default,the room code will not listed on Guard Station.
Basic operation by Input
For example,maybe you just remember
the room code including the numbers of
32,input the code 32 on inputbox,then
touch the key “Search”, all Namelist in-
cluding the code of 32 will be displayed.
1.Call a User or a Guard Station
_
On Main menu, touch [Input Mode]
icon to display Search screen, or press
[Call] button in shortcut.
Input the Default code on input box, then
press [Call] button,calling is activated
immediately.
(a) Input the Room code on input box
if you remember the room code clearly,
then press [Call] button,calling is
activated immediately.
(b) If you don’t remember the room code
clearly, you can use the function of fuzzy
search.Searching by digital numbers or
by name is available.
The Default code is composed of 3-digits
IPG IP_NODE_ID address and 3-digits
Monitor or Door Station address.
For example:
To call the02address MonitorinsideIP
gateway address IP_NODE_ID=12, input
012002
Please note the above numbers are logical
device address, not input numbers or call
address.
1) Call by Default code:
Search by digital numbers:
2) Call by Room code:
32_
Select the target you want, then press
[Call] button to activate calling.