Yada BT532983 User manual

User Manual
Important, retain for future reference:
Read carefully
BT532983
1080PROADCAM
with 2.4” LCD Monitor

TF Card
8 GB
2
QUICK INSTALLATION GUIDE
1. Mount the Roadcam
Before you begin... Gather these items.
1
1
2
2
3 4
Mount the Roadcam
on the windshield.

3
3. Connect to Power
2. Insert the MicroSD Card
3
3
4

4
Please read all of the installation instructions carefully before installing
the product. Improper installation will void manufacturer’s warranty. The
installation instructions do not apply to all types of vehicles, and are
written as guidelines to assist in installing the system.
Consult an experienced technician if you are not comfortable installing
the product. You can also contact YADA at 1.866.294.9244 to speak
to one of our installation specialists if you have any specific questions
regarding the 1080P Roadcam.
BEFORE using the 1080P Roadcam, please read the safety
information provided in this user manual. ALWAYS use the
product as outlined in this user manual.
Please make sure to read and understand all local laws and regulations
regarding cameras and their use in a vehicle. Laws vary by state.
INTRODUCTION

5
TF Card
8 GB
PACKAGE CONTENTS
21
3 4
1. 1 x 1080P Roadcam
2. 1 x Windshield Mount
3. 1 x 12V/24V Power Adapter
4. 1 x 8GB MicroSD Card

6
PRODUCT SPECIFICATIONS
Display: 2.4 inch display
Lens: 128 degrees diagonal
Video Resolution: FHD (1920x1080), HD (1280x720)
or VGA (640x480)
Circular Video: Seamless loop recording
Memory Card: MicroSD (maximum support 32GB)
Microphone: Supported
Built-in Audio: Supported
Operating Temperature: 14°F~140°F (-10°C~60°C)
Operating Voltage: Cigarette Charger - DC 12/24V / DC 5V (Mini USB)
Battery: Built-in 150 mAh li-ion battery
CAMERA DIMENSIONS
3.46” / 88mm 1.37” / 35mm
2.16” /
55mm

7
PRODUCT OVERVIEW
1. LED Indicator Lights
2. LCD Screen
3. OK / Record Button
4. Mode Button
5. Lock Video Button
6. Power Button
7. Mini USB Power Port
8. Mounting Socket
9. Speaker
10. Camera Lens
11. MicroSD Card Slot
12. Up Navigation Button
13. Menu Button
14. Down Navigation Button
15. Power Reset Hole
16. Microphone
10
12
11
13
14
15 16
78
1
3
2
4
5
6
9

8
1. 2.
3.
INSTALLATION
Insert the
windshield mount
to the socket on
the top of the
Roadcam.
Plug the Mini USB
power cable into the
DC input port.
Note: Power on and test camera before mounting.
Peel off the protective sticker
from the LCD screen and
insert the MicroSD card.

9
4.
5.
Route and hide the power cable in the headliner and pillars in your vehicle.
Plug the cigarette charger cable into your vehicle’s 12/24V DC outlet.
INSTALLATION
Mount the Roadcam on the windshield. You can turn on the Roadcam and
check the live screen to determine the most suitable mounting position.
Turn the adjustment knob clockwise while pressing the windshield mount
onto the glass to secure the Roadcam on the windshield. You are all set!

10
Initial Setup
Set the date & time before installing and using the Roadcam. This date &
time is the time stamp for all recorded media files and digital clock.
Switching Modes
Press the button to cycle through the following modes: video mode >
camera mode > playback mode. The Roadcam cannot switch between
modes while it is recording. Press the button to stop recording and
press the button to switch between modes.
Video Mode
• This is the default recording setting. The Roadcam will start recording
automatically once it is turned on.
• Files are looped or recorded over by the default of 1 minute.
The MicroSD card will hold 1 minute segments and record over them as
space is needed.
• Stop loop video: press the button once to pause or resume recording.
• Lock video: press the button during recording to lock that recorded file.
• Press the button during recording to turn the microphone on or off.
Note: The Roadcam will not record automatically when you switch back
to video mode from other shooting modes. You need to press the
button manually to start recording.
CONFIGURATION & MENU SETTINGS