Yada BT55496 User manual

BT55496
BehindSight
TM
Wired

TABLE OF CONTENTS
1. Introduction ...............................................................................................................................................................................1
2. Package Contents ...................................................................................................................................................................2
3. Product Specications ..........................................................................................................................................................3
4. Installation Guide ....................................................................................................................................................................3
5. Settings and Operation ........................................................................................................................................................5
6. Safety Information ..................................................................................................................................................................6
7. Maintenance & Warranty ......................................................................................................................................................8
8. General Information ............................................................................................................................................................13

1
Please read all of the installation instructions carefully before installing the product. Improper
installation will void manufacturer’s warranty. The installation instructions do not apply to all types
of vehicles, and are written as guidelines to assist in installing the system.
Consult an experienced technician if you are not comfortable installing the product. You can also
contact Winplus at 866.294.9244 to speak to one of our installation specialists if you have any
specic questions regarding the Wire BehindSight™ Camera.
BEFORE using the Wired BehindSight™ Camera, please read the safety information provided
in this user manual. ALWAYS use the product as outlined in this user manual.
Please make sure to read and understand all local laws and regulations regarding cameras and their
use in a vehicle. Laws vary by state.
1. INTRODUCTION

2
1. 3.5” Dash Monitor
2. Wired BehindSight™ Camera
with 6 meter / 20 feet cable
3. 12V/24V Power Adapter for Monitor
4. Hardwire Cable for Monitor
5. Vent Mount for Monitor
6. Install Kit
7. User’s Manual
8. Quick Install Guide
2. PACKAGE CONTENTS
7.
8.
6.
BT55496
BehindSight
TM
Wired
1.
2.
3.
4.
5.

3
1. CMOS Sensor
2. Operating Voltage: DC 12V / 24V
3. Operating Temperature: -10~+50°C
4. Night vision
5. 110 Degree View Angle
6. Camera Water Resistance: IP67 rating
DASH MONITOR INSTALLATION
1. Take the monitor out of the box and clip directly into a vent on your dash board. The vent mount
is already attached to the monitor, but can be removed if needed.
2. Now power the monitor:
a. 12V/24V Power Adapter
Take the 12V/24V Power Adapter and plug adapter into the right side of the Yada Dash
Monitor. Plug the other end into 12V/24V power port in your car.
b. Hard wire
Take the Hard Wire Power Adapter and plug adapter into the right side of the Yada Dash
Monitor. Run cable to fuse box and connect to fused accessory power source. Refer to
your vehicle owner manual for location of available accessory fuses.
3. At this time, the Yada Dash Monitor is ready to be automatically powered on when the vehicle
engine starts.
Warning: Many vehicles provide constant power to the 12V outlet. If your outlet provides constant
power, please remember to unplug the monitor when not in use to avoid draining the vehicle
battery.
3. PRODUCT SPECIFICATIONS
4. INSTALLATION GUIDE

4
WIRED BEHINDSIGHT™ CAMERA INSTALLATION
1. Remove your license plate
2. Determine the best route for the Camera Cable from the top of your license plate to the inside of
the vehicle. You may need to drill a small hole (using a 13mm or 1/2” drill bit) in the panel behind
where the license plate is situated.
3. Take the Camera and run the cable through the Rubber Ring Grommet, then from the outside of
your car to the inside. Pull the cable through so that there is a small amount of slack and you can
still move the Camera around the license plate.
4. Continue to run and tuck the Connection Cable to the front of the car and directly to the Monitor.
5. Plug the other end of the Connection Cable into the port on the Monitor. Please note that the
cable should not wrap around the monitor, but should stay to the right of the Monitor and run
down the interior on the passenger side of your car. At no time should the Wire BehindSight™
Power or Connection Cable be loose or dangling on the driver’s side of the vehicle.
6. While sitting in the driver’s seat of the car with the key in the accessory position. The monitor
will automatically start when connected to a power source.
7. Use the provided Zip ties to secure wires neatly within your car.
8. Standing with the license plate in one hand and the Camera in the other hand, slide the Camera
along the top of the license plate in order to determine the placement. Best placement is in the
center of the license plate. If you have a rear hatch handle you may need to remove the Camera
bracket, turn the bracket upside down and reattach to the Camera. You would then mount the
Camera from the bottom of the license plate.
9. Peel o the lining of the double-sided tape already attached to the Camera and press rmly to
the license plate to secure the Camera. Make sure the back of the license plate is clean before
attaching double-sided tape.
10. Press the license plate and the Camera mounting rmly to the car to secure and get full contact
between the license plate and the double-sided tape. Screw the license plate back onto the rear
of your vehicle.
11. Once license plate and Camera are secure, you can adjust the vertical angle of the Camera to
your specic need.
12. As a last check, note the position of the view from the Camera. Adjust the angle of the Camera
as necessary to achieve the best rear view.
Video’s are available on www.letsyada.com to see step by step installation instructions.

5
5. SETTINGS AND OPERATION
POWER ON/OFF
• The Dash Monitor will automatically turn ON when it is connected to a power source.
• Hold the power button to turn ON/OFF the unit if necessary.
PARKING AID LINE
• You can turn ON/OFF the Parking Aid Line by pressing the Parking Aid Line button when the
reverse image appears on screen.
BRIGHTNESS
You can adjust the brightness of the Monitor according to your desired level.
Note: Brightness setting ONLY works while the camera image is on the screen.
Power Parking Aid Line
Brightness

6
WARNING: A failure to read and follow these warnings and instructions may result in a serious
accident, including damaged property or a serious injury, including loss of life.
• The Wired Behindsight™ Camera is designed as an aid to the driver in detecting large stationary
objects to help avoid damaging the vehicle. However, you, the driver, must use it safely and
properly. Use of the Wired BehindSight™ Camera is not a substitute for safe, proper and legal
driving.
• Never back up while looking only at the screen. You should always check behind and around the
vehicle when backing up just as you would if the vehicle did not have the Wired BehindSight™
Camera. Always make sure your intended path is clear. If you back up while looking only at the
monitor, you may hit a vehicle, pedestrian, bicyclist, child, pet or other object resulting in injury
or death. Always back up slowly.
• Never depend on the Wired BehindSight™ Camera entirely when backing up. The image on the
screen is dierent from actual conditions. Objects viewed in the rear view monitor dier from
actual distance because a wide-angle lens is used. Objects in the rear view monitor will appear
visually opposite than when viewed in the rear view and outside mirrors. Use the inside mirror
or glance over your shoulder to properly judge distances to other objects.
• The Wired BehindSight™ Camera “night vision” feature is an aid to a driver but is limited. Always
use your own eyes to conrm the vehicle’s surroundings, as the displayed image may be faint or
dark, distorted, or not entirely visible. Always check behind and all around the vehicle visually
with mirrors before proceeding.
• The area displayed by the Wired BehindSight™ Camera is limited. The Wired BehindSight™
Camera does not display objects that are close to or below the bumper, underneath the
vehicle, or objects out of the Camera’s eld of view. The area displayed on the screen may vary
according to vehicle orientation or road conditions.
• Be sure to check the Camera’s position and mounting angle before each use.
• Make sure the trunk, hatch, or backdoor is completely and securely closed when backing up.
• If the back of the vehicle is hit, the position and mounting angle of the Wired BehindSight™
Camera may change.
• When washing the vehicle with high pressure water, be sure not to spray it around the Camera.
Otherwise, water may enter the Camera unit causing water condensation on the lens, a
malfunction, re or an electric shock.
6. SAFETY INFORMATION

7
• Do not strike the Camera. It is a precision instrument. Otherwise, it may malfunction or cause
damage resulting in a re or an electric shock.
• This product will only provide images of items that are within the eld of view of the Camera.
Thus, it is imperative that the Camera should be kept clean and unobstructed, and should be
mounted so that its eld of view includes the entire area behind your vehicle.
• Adhere to all applicable trac laws and motor vehicle regulations applicable to the device.
• Consult local laws and regulations for any restrictions on installation or use.
• Never allow children to play with the device. Small parts may be a choking hazard.
• If you replace the tires, the area displayed on the monitor may change and you may need to
adjust the Camera.
• There is a plastic cover over the Camera. Do not scratch the cover when cleaning dirt or snow
from the cover.
• The Camera has a water resistant construction. Do not detach, disassemble or modify it. This
may cause incorrect operation. Camera is waterproof.
• Do not submerge Camera in water, which can cause internal damage to the Camera.
• If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold
weather, the system may not operate normally. The Digital Camera can withstand the eects of
rain, snow, and inclement weather.
• When strong light directly enters a camera, objects may not be displayed clearly.
• The screen may icker under uorescent light.
• The colors of objects on the rear view monitor may dier somewhat from those of the actual
object.
• If dirt, rain or snow attaches to the Camera, the monitor may not clearly display objects. If water
droplets, snow or mud adhere to the Camera lens, rinse with water and wipe with a dry cloth.
• Do not use alcohol, benzene or thinner to clean the Camera. This will cause discoloration. To
clean the Camera, wipe with a clean cloth dampened with mild cleaner diluted with water and
then wipe with a dry cloth.
• ALWAYS engage Parking/Emergency/Hand Brakes of the vehicle when testing the system.

8
CLEANING
• If dirt, rain or snow attaches to the Camera, the monitor may not clearly display objects. If water
droplets, snow or mud adhere to the Camera lens, rinse with water and wipe with a dry cloth.
• Do not use alcohol, benzene or thinner to clean the Camera. This will cause discoloration. To
clean the Camera, wipe with a clean cloth dampened with mild cleaner diluted with water and
then wipe with a dry cloth.
WARRANTY
• WINPLUS NORTH AMERICA
LIMITED WARRANTY
Winplus North America warrants, to the original purchaser, that its products are free from
SAFETY AROUND AND BEHIND OTHER VEHICLES
Using a Wired BehindSight™ Camera is not enough to completely overcome a vehicle’s blind spot.
Many preventable injuries and deaths occur in driveways or parking lots when drivers do not see
children, pets, or others near their vehicles. Here are a few safety tips that will help you to avoid a
back-over accident:
• Walk completely around your vehicle before getting in. Check for kids, toys, and pets before
entering the vehicle and starting the engine.
• Know where children are. Have children stand in a place where they are in full view.
• Be aware of young children. Young children are small and hard to see.
• Parents, caregivers and all adults need to be vigilant in supervising children, especially when
children are in the yard, driveway or parking lot playing near parked cars.
• Roll down your window so you will be able to hear what is happening outside your vehicle.
• Owners of SUVs, trucks, and vans need to take extra care to avoid hitting or running over a child.
• Teach children to move away from a vehicle whenever it is started.
7. MAINTENANCE & WARRANTY

9
defects in material and workmanship for 1 year from the date of original purchase. Where
permitted by law, Winplus North America’s liability shall be limited to that set forth in this limited
express warranty. This limited express warranty shall be the exclusive remedy of the purchaser
and Winplus North America makes no other warranty of any kind aside from the limited express
warranty stated above.
NOTE: Warranty only applies for North American customers of purchases made in North
America.
CONDITIONS OF WARRANTY
If during the 1 year warranty period your new product is found to be defective, Winplus North
America will repair such defect, or replace the product, without charge for parts or labor subject
to the following conditions:
1. All repairs must be performed by Winplus North America.
2. All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.
3. The equipment must not have been altered or damaged through negligence, accident,
improper operation, or failure to follow the product instructions for installation, use, or
care.
4. The replacement of parts is excluded from the warranty when replacement is necessary
due to normal wear and tear.
5. Repair or replacement parts supplied by Winplus North America under this warranty are
protected only for the unexpired portion of the original warranty.
6. This is a “repair or replace” warranty only, and does not cover the costs incurred for the
installation, removal or reinstallation of the product, or damage to any mobile phone
device or vehicle.
OWNER’S RESPONSIBILITIES:
Winplus North America will make every eort to provide warranty service within a reasonable
period of time. SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED OR IF YOU
WOULD LIKE ASSISTANCE IN OBTAINING SERVICE, PLEASE CALL TOLL FREE 1.866.294.9244
DURING REGULAR BUSINESS HOURS MONDAY THROUGH FRIDAY 9:00 AM TO 5:00PM.

10
NOTE: Toll Free # is for North America Customers ONLY. See Customer service section for
customer contact numbers for other regions/oces.
For customer service and technical support, please call us at 1.866.294.9244 or email us at
[e-mail]. If at that time it is determined that a replacement unit is
needed, the support representative will issue a Return Authorization and instruct on how to get
a new unit.
Winplus North America makes no other warranty of any kind aside from the limited express
warranty stated herein.
DISCLAIMER OF WARRANTIES, INCLUDING WARRANTY OF MERCHANTABILITY AND WARRANTY
OF FITNESS FOR PARTICULAR PURPOSE: EXCEPT AS SPECIFICALLY SET FORTH HEREIN, NO
WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIES, IS MADE AS TO THE REARVIEW MIRROR
BACKUP CAMERA. EXCEPT AS EXPRESSLY SET FORTH HEREIN, WINPLUS NORTH AMERICA AND/
OR ITS AFFILIATES EXPRESSLY DISCLAIMS, WITHOUT LIMITATION, ANY STATUTORY WARRANTIES
AND ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
Winplus North America and/or its aliates do not guarantee or promise that the user of Wired
BehindSight™ Camera will not be in an accident or otherwise not collide with an object and/or
person. Our Wired BehindSight™ Camera is not intended in any way to be a substitute for careful
and cautious driving or for the consistent adherence to all applicable trac laws and motor
vehicle safety regulations.
The Wired BehindSight™ Camera is not intended to be a substitute for rearview mirrors or for
any other motor vehicle equipment mandated by law. Even when properly installed, our Wired
BehindSight™ Camera has a limited eld of vision and does not provide a comprehensive view
of the rear area of the vehicle. You should always look around outside your vehicle and use your
mirrors to conrm rearward clearance and that your vehicle can back up safely.
Winplus North America and/or its aliates are not responsible for a user’s intended or actual use

11
of the Wired BehindSight™ Camera. In no event shall Winplus North America and/or its aliates
have any liability for any losses (whether direct or indirect, in contract, tort or otherwise)
incurred in connection with the Wired BehindSight™ Camera, including but not limited to
damaged property, personal injury and/or loss of life. Neither shall Winplus North America
and/or its aliates have any liability for any decision, action or inaction taken by any person
in reliance on the Wired BehindSight™ Camera, or for any delays, inaccuracies and /or errors in
connection with the Wired BehindSight™ Camera and its functioning.
Winplus North America and/or its aliates shall have no responsibility or liability for damage
and/or injury resulting from accidents occurring with vehicles having the installed, and Winplus
North America and/or its aliates, the manufacturer, distributor and seller shall not be liable for
any injury, loss or damage, incidental or consequential, arising out of the use or intended use of
the product.
• WINPLUS EUROPE
LIMITED WARRANTY
Winplus warrants, to the original purchaser, that its products are free from defects in material
and workmanship for 12 months from the date of original purchase. Where permitted by law,
Winplus liability shall be limited to that set forth in this limited express warranty. This limited
express warranty shall be the exclusive remedy of the purchaser and Winplus makes no other
warranty of any kind aside from the limited express warranty stated above.

12
OWNER’S RESPONSIBILITIES:
In order to provide you with the proper warranty service, we request that you adhere to the
following procedure:
1. Include a copy of your sales receipt or bill of sale with your unit when it is returned for
warranty service.
2. If it is necessary to return your product for service, please return it securely packed,
preferably in the original shipping box, and freight and insurance prepaid to the
following address:
ATTN: WINPLUS BLUETOOTH PRODUCTS RETURNS
Unit 4, Two Counties Estate, Falconer Road, Haverhill, Suolk CB9 7XZ, UK
3. Please include a detailed explanation of the problem you are having.
4. If your product is found by Winplus to have a defect in material or workmanship, within the
warranty period, it will be repaired or replaced at no charge and returned to you prepaid.
Winplus makes no other warranty of any kind aside from the limited express warranty stated herein.
• WINPLUS AUSTRALIA/HONG KONG
LIMITED WARRANTY
This Yada product is warranted against faulty workmanship for a period of 2 years from date
of purchase. Liability is limited to replacement of the product and claims for associated or
consequential loss or damage will not be accepted. Warranty is void and does not apply if the
product has been damaged or rendered faulty by accident, abuse, misuse, incorrect application
or if the product has been modied or tampered with. Proof of purchase is required to validate
warranty claims. If this product is faulty, simply return it to the place of purchase with your
receipt for a replacement product. No refunds of credits will be issued. Replacement is limited
to a Yada product of the same or similar model.

13
CUSTOMER SERVICE/CONTACT
For questions or issues regarding the product, please visit www.letsyada.com or contact Winplus in
your area/region to speak to our customer service representative:
Winplus North America Tel.: [phone]
Tel.: [phone]
Winplus Europe Tel.: [phone]
Winplus Australia Tel.: [phone]
Winplus New Zealand Tel.: [phone]
Winplus Asia Tel.: [phone]
You can also contact us online by visiting www.winplus.com for more information about the product.
IF YOU ARE EXPERIENCING ANY ISSUES WITH THE PRODUCT DURING OPERATION, DO NOT RETURN
THE PRODUCT TO THE STORE. CONTACT WINPLUS DIRECTLY FOR INSTRUCTIONS ON HOW TO
RETURN/EXCHANGE THE PRODUCT.
FCC/ICC
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one of the following measures:
8. GENERAL INFORMATION

14
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.

www.winplus.com www.letsyada.com
© 2016 Winplus North America Inc. All Rights Reserved. Winplus, the logo design, and Yada® are
trademarks or registered trademarks of Winplus North America Inc.
NORTH AMERICA
EUROPE
AUSTRALIA
NEW ZEALAND
ASIA
820 South Wanamaker Avenue,
Ontario, CA 91761
Unit 4, Two Counties Estate, Falconer Road,
Haverhill, Suffolk CB9 7XZ, U.K.
6 Prospect Place,
Boronia Victoria, Australia, 3155
22-24 Olive Road, Penrose,
Auckland, New Zealand
Suites 6-11, 7th Floor, Corporation Park,
11 On Lai Street, Shatin, N.T., Hong Kong
Tel: [phone]
Fax: [phone]
Tel: [phone]
Fax: [phone]
Tel: [phone]
Fax: [phone]
Tel: [phone]
Fax: [phone]
Tel: [phone]
Fax: [phone]

BT55496
BehindSight
TM
câblé
GUIDE D’UTILISATIONGUIDE D’UTILISATION

TABLE DES MATIÈRES
1. Introduction .............................................................................................................................................................................18
2. Contenu de l’emballage .....................................................................................................................................................19
3. Spécications du produit ................................................................................................................................................. 20
4. Guide d’installation ............................................................................................................................................................. 20
5. Réglages et utilisation ........................................................................................................................................................ 22
6. Renseignements sur la sécurité ..................................................................................................................................... 23
7. Entretien et garantie ........................................................................................................................................................... 26
8. Renseignements généraux .............................................................................................................................................. 30

18
Veuillez lire attentivement toutes les directives d’installation avant d’installer le produit. La garantie
est annulée en cas d’installation inappropriée. Les directives d’installation ne s’appliquent pas à tous
les types de véhicules et sont rédigées en tant que lignes directrices pour l’installation du système.
Consultez un technicien d’expérience si vous avez des doutes au sujet de l’installation du produit.
Vous pouvez aussi communiquer avec Winplus au 866.294.9244 pour parler à l’un de nos
spécialistes de l’installation si vous avez des questions spéciques au sujet de de la BehindSight™
câblé Caméra.
AVANT d’utiliser la BehindSight™ câblé Caméra, veuillez lire les renseignements sur la
sécurité fournis dans ce guide d’utilisation. Utilisez TOUJOURS le produit tel que décrit dans
ce guide d’utilisation.
Veuillez vous assurer de lire et de bien comprendre toutes les lois et tous les règlements locaux en
vigueur au sujet des caméras et de leur utilisation avec un véhicule, les lois variant d’un état à l’autre.
1. INTRODUCTION