V1.0 22/07/2019 KB
Configure the Yaesu FTM-400 for GB7MT Technical
Yaesu UK Limited
Unit 12 Sun Valley Business Park, Winnall Close, Winchester, Hampshire, SO23 0LB
Turn to select [5 RPT SHIFT]
Touch [5 RPT SHIFT] until – is displayed
Turn to select [6 RPT SHIFT FREQ]
Touch [6 RPT SHIFT FREQ] so that the current
repeater shift frequency is highlighted in
yellow.
Turn until the repeater shift frequency is
9.00 MHz.
Touch three times until the radio is
back at the main frequency display.
5) Store the repeater frequencies into a memory channel.
Press for one second or longer.
The memory writing screen will be displayed.
The frequency will be automatically displayed
in the next empty memory channel.
Turn to select a different memory
channel if desired.
Press to save the data to memory.
If you wish to name the memory channel
please refer to Page 70 Steps 1 to 11 in
“Naming the memory” in the operating
manual.
