FT-DX101D/MP
Enable 70 MHz (4m) Band
V1.0 1/5/2019 KB
Technical
Yaesu UK Limited
Unit 12 Sun Valley Business Park, Winnall Close, Winchester, Hampshire, SO23 0LB
To change the Region to C2
To enable the 70 MHz (4m) Band on the FT-DX101D/MP first enable the C2 Region, this will also provide 5MHz (60m)
coverage from 5.2500000 MHz – 5.406050 MHz.
Turn the transceiver OFF.
2. Press and hold in the [FUNC] and [MODE]
while turning the transceiver ON.
The green LED indicator will blink with
intervals of 0.5 sec (0.5 sec ON, 0.5 sec OFF).
3. Momentarily press the [MODE] button, and
the green LED indicator will now blink with
interval of 1 sec (1 sec ON, 1 sec OFF).
4. Press and hold in the [MODE] button, and
the radio will restart automatically. Once
restarted the region will have changed to
C2.
To enable 70 MHz (4m) band for the MAIN receiver
2. Press the [70/GEN] button.
frequency display as shown in the picture.
