Yeastar Technology S20 User manual

S-Series Extension User Guide
1
Sales Tel: [phone]
E-mail: [e-mail]
Support Tel:[phone]
E-mail:[e-mail]
Web: http://www.iconnecttechnologies.com
Version: 1.1
Revised: 2016.07.06
Extension User Guide
S-Series VoIP PBX

S-Series Extension User Guide
2
Contents
1. Extension User Portal……………………………………………………………………………………4
1.1 Getting to Know the Desktop………………………………………………………………………….4
1.2 Me………………………………………………………………………………………………………..5
1.2.1 Extension Settings…………………………………………………………………………………5
1.2.2 Blacklist/Whitelist…………………………………………………………………………………..7
1.2.3 Voicemail……………………………………………………………………………………………8
1.2.4 Password Settings…………………………………………………………………………………9
1.3 CDR and Recordings…………………………………………………………………………………..9
2. Basic Calling……………………………………………………………………………………………..11
3. Call Transfer……………………………………………………………………………………………...11
4. Call Pickup………………………………………………………………………………………………..11
5. Call Monitor………………………………………………………………………………..…………….12
6. Advanced Calling Feature……………………………………………………………………………..12
7. Voicemail………………………………………………………………………………………………….12
Appendix A –Feature Codes…………………………………………………………………………….14

S-Series Extension User Guide
3
About This Guide
This Extension User Guide explains all S-Series IP PBX management menus available for extension
users. Yeastar S-Series IP PBX provides extension user accounts, which allow the extension users
to log in S-Series IP PBX using their own extension accounts. All the users can check their own
voicemail, recordings and configure the extension settings after logging in S-Series IP PBX.
NOTE
This guide only describes the default settings available for extension users. If the administrator
grants more user permissions for the extension, please refer to the Yeastar S Series Administrator
Guide for more information.
Related Documents
The following related documents are available on Yeastar website:
http://www.yeastar.com/S_Series_VoIP_PBX
Document
Description
Yeastar S-Series Datasheet
Datasheet for the Yeastar S-Series.
Yeastar S20 Installation Guide
Yeastar S50 Installation Guide
Yeastar S100 Installation Guide
Yeastar S300 Installation Guide
Installation guide for the Yeastar Series IP PBX.
Yeastar S-Series Administrator Guide
The administrator could refer to this manual for
instructions on how to configure, operate, monitor,
and maintain the Yeastar S-Series IPPBX.

S-Series Extension User Guide
4
1. Extension User Portal
To log into the Extension User Portal, navigate to the S-Series IP PBX URL.
Default IPAddress: https://192.168.5.150:8088
Log in with your S-Series IP PBX extension number and the password assigned by your S-Series IP
PBX system administrator. The default password is “pass”+ “extension number”.
NOTE
If you cannot log in S-Series IP PBX with your extension number, please contact the administrator to
check the password.
1.1 Getting to Know the Desktop
When you log in Extension User Web GUI, you will see the desktop. From here, you can manage
your extension settings and check the voicemail messages, CDR and recordings.

S-Series Extension User Guide
5
Main Menu Open Application Options
Main Menu: view and open the extension user applications. Right-click the application icon, you
can add the application to the desktop.
Open Application:
Click the icon of an application to show or hide its window on the desktop.
Right-click the icon and choose from the shortcut menu to manage the application window
Options: logout, change Web language.
1.2 Me
Click on to configure your extension settings and check voicemail box.
1.2.1 Extension Settings
1) User Information
Name: enter your name.
Email: enter your email address, the email will be used to recover password, receive
forwarding voicemails, receive fax as an attachment and receive event notifications.
Mobile Number: enter your phone number. The phone number can receive forwarded calls
and event notifications.

S-Series Extension User Guide
6
Prompt Language: choose the prompt language.
2) Voicemail
Enable Voicemail: check the box to enable voicemail feature.
Send Voicemail to Email: check the box to send voicemail to your email address.
Voicemail Access PIN: the password to enter the voicemail menu.
3) Call Forwarding
Always: always redirect the call to the designated destination.
No Answer: redirect the call to the designated destination when it is not answered.
When Busy: redirect the call when the extension is busy
4) Mobility Extension
Ring Simultaneously: when the extension has an incoming call, it rings the mobile number
simultaneously.
Mobility Extension: to make the system ring your mobile phone, a prefix matching the
outbound route also needs to be filled in.
Enable Mobility Extension: if you enable this setting, when you call in the system with your
mobile phone, the phone will have the same user permission with the desktop extension. So
your mobile phone will be able to reach the other extension, dial out with the trunk, and play
voicemail.
5) Other Settings
Ring Timeout: customize the timeout in seconds. Phone will stop ringing over the time
defined.

S-Series Extension User Guide
7
DND: Do not Disturb. When DND is enabled for the extension, the extension will be
unavailable.
Call Waiting: check the option if the extension should have Call Waiting capability. If the
option is checked, the “When Busy”call forwarding options will be unavailable.
1.2.2 Blacklist/Whitelist
Blacklist is used to block an incoming/outgoing call. If the number of incoming or outgoing call is
listed in the number blacklist, the caller will hear the following prompt: “The number you have dialed
is not in service. Please check the number and try again”. The system will then disconnect the call.
Whitelist is used to allow incoming/outgoing numbers.
The system supports to block or allow 3 types of numbers:
Inbound: the number would be disallowed or allowed to call in the system.
Outbound: users are disallowed or allowed to call the number out from the system.
Both: both inbound and outbound calls are disallowed or allowed.
1) Add Blacklist/Whitelist
Select Blacklist or Whitelist tag, click to add a number to Blacklist or Whitelist.
Name: give a name for the blacklist/whitelist.
Number: enter the numbers, one number per row.
Type: choose the type.

S-Series Extension User Guide
8
2) Import Blacklist/Whitelist
Click , you will see a dialog window shown as below.
Click and select the file to start uploading. The file must be a .csv file. Open the file
with notepad, check the sample below. You can export a blacklist/whitelist file from S-Series and
use it as a sample to start with.
The sample csv file will result in the following speed dial in Yeastar S-Series.
Export Blacklist/Whitelist
Select the checkbox of the blacklist/whitelist, click , the selected blacklist/whitelist will
be exported to your local PC.
1.2.3 Voicemail
Click Voicemail tab to check the voicemail messages.

S-Series Extension User Guide
9
Voicemail Message Status:
: Unread
: Read
Manage the Voicemail Messages:
Click to play the message.
Click to download the message file.
Click to delete the message.
Click or to switch the message status.
1.2.4 Password Settings
You can change the extension login password here. First type the old password, and type new
password twice to confirm.
1.3 CDR and Recordings
Click Main Menu and click to check the call logs and recordings. You can run reports against
the logs and filter on the following:
Time
Call From
Call To
Call Duration

S-Series Extension User Guide
10
Talk Duration
Status
Trunk
Communication Type
PIN Code
Number Fuzzy Search
You can perform the following operations on the filtered call report:
Download Searched Result
Click Download the Records to download the searched records.
Edit List Options
Click to choose which options will be displayed on the logs page.
Play Recording File
Click to play the recording file.
Download Recording File
Click to play the recording file.
Note: by default, the extension user has no permission to check the recording files.

S-Series Extension User Guide
11
2. Basic Calling
Making Internal Calls
To make internal calls, pick up the analog phone or IP phone and dial the other extension’s
number. For example, to reach extension 100, dial 1 0 0.
Making Outbound Calls
To place an outbound call, you should dial the numbers matching outbound routes on S-Series
IP PBX. The setting will be different if the administrator has made relative configuration, please
contact the administrator for details.
Answering Calls
To answer an incoming call, pick up the phone as you normally would.
3. Call Transfer
There are 2 types of call transfer available on S-Series IP PBX: Blind Transfer and Attended Transfer.
Users can achieve call transfer by pressing the feature code during the call.
Blind Transfer
Default feature code: *03
1. Dial "*03" during the call;
2. Dial the called number after hearing a prompt "transfer";
3. The call will be transferred after the number is dialed.
Attended Transfer
Default feature code: *3
1. Dial "*3" during the call;
2. Dial the called number after hearing a prompt "transfer";
3. Talk to the transfer recipient;
4. The call will be transferred after hanging up.
4. Call Pickup
Call Pickup is a feature that allows one to answer someone else's call. The feature is accessed by
pressing call pickup feature code on S-Series IP PBX. If a colleague's phone set is ringing, one can
answer that call by picking up one's own set and then using the call pickup feature, instead of walking
to the colleague’s desk.
Group Call Pickup
The default call pickup for Group Call Pickup is *4. Press * 4 to pick up a call from a ringing
phone which is in the same group as you are.
Direct Call Pick
The default Direct Call Pickup (Extension Pick up) feature code is *04. Press * 0 4 and follow the
extension number to pick up the call. For example, if an incoming call reaches to extension 100,

S-Series Extension User Guide
12
you can pick up the call using your phone by dialing * 0 4 1 0 0.
5. Call Monitor
S-Series IP PBX supports multiple call monitor modes:
Extensive: all the following 3 modes will be available to use.
Listen: you can only listen to the call, but can't talk (default feature code: *90).
Whisper: you can talk to the extension you're monitoring without being heard by the other party
(default feature code: *91).
Barge-in:you can talk to both parties (default feature code: *92).
To use spy feature on S-Series IP PBX, you need to ensure that the target extension you want to
monitor is allowed being monitored. The administrator should also select one spy mode for you. For
example, if you have the permission to do “Listen”monitor and extension 100 is allowed being
monitored. You can dial * 9 0 1 0 0 to monitor calls at extension 100.
6. Advanced Calling Feature
Intercom
To make an announcement to a specific extension, you need to dial * 5 follow the extension
number on your phone. For example, to an announcement to extension 500, dial * 5 5 0 0, then
the extension 500 will be automatically picked up.
Call Parking
To put a call on hold and continue the conversation from another phone, dial * 6 during the call,
and the system will prompt that the call is parked at an extension, i.e. 6900. Then you can
resume the conversion on another phone by dialing the extension number 6900
You can also do directed call parking with feature code *06. For example, dial * 0 6 6 9 0 0
during an active call, and then resume the conversation on another phone by dialing the
extension number 6900.
One Touch Record
Dial * 1 during the call to make one-touch record.
7. Voicemail
Different ways to check voicemail
From your own extension: dial * 2.
From other extension: dial * 0 2 to enter the voicemail voice menu, then dial your
extension number and password to check your voicemail. For example, your extension
number is 100, and you want to check voicemail on other phone, dial * 0 2, then dial 1 0 0
to check your voicemail.

S-Series Extension User Guide
13
Email: “Voicemail to Email”feature is enabled by default. If an email address is set, the
voicemail will sent to the email.
Web browser: log in S-Series IPPBX with the extension user account to check your
voicemail.

S-Series Extension User Guide
14
Appendix A –Feature Codes
One Touch Record
*1
Check Voicemail
*2
Voicemail for Extension
**
Voicemail Main Menu
*02
Attended Transfer
*3
Blind Transfer
*03
Call Pickup
*4
Extension Pickup
*04
Intercom
*5
Call Monitor - Listen
*90
Call Monitor -Whisper
*91
Call Monitor –Barge-in
*92
Call Parking
*6
Directed Call Parking
*06
Parking Extension Range
6900-6999
Enable DND
*74
Disable DND
*074
Call Forwarding
Reset to Defaults
*70
Enable Forward All Calls
*71
Disable Forward All Calls
*071
Enable Forward When Busy
*72
Disable Forward When Busy
*072
Enable Forward No Answer
*73
Disable Forward No Answer
*073
[End]