Yeastar Technology S50 User manual

Yeastar S50 VoIP PBX
Installation Guide
Version 1.0
June 22, 2016
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
2/13
Content
Content………………………………………………………………………………………………………...2
Welcome……………………………………………………………………………………………………….3
Before You Start……………………………………………………………………………………………...4
Package Contents………………………………………………………………………………………….4
Hardware Overview………………………………………………………………………………………..4
LED Indicators and Ports………………………………………………………………………………….5
Installation…………………………………………………………………………………………………….7
Safety Disclaimers and Installation Warnings……………………………………………………………7
Module Installation………………………………………………………………………………………….7
Desktop Installation……………………………………………………………………………………….10
Rack Installation ………………………………………………………………………………………….10
Ground Connection………………………………………………………………………………………..11
Connecting the Equipment……………………………………………………………………………….12
Getting Started with the Configuration…………………………………………………………………13
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
3/13
Welcome
Thank you for choosing Yeastar S50 IP PBX. S50 is a compact and full-featured IP-PBX that comes
in a 19‟‟ 1U rack-mountable chassis. The advanced module-based S50 is capable of supporting
ISDN BRI, PSTN, and GSM connectivity, providing VoIP communications for up to 50 users.
This guide describes how to install the S50 and how to log in the web GUI to configure the system.
Once you complete the installation, refer to the Yeastar S-Series Administrator Guide for instructions
on how to perform configurations on the system.
Related Documents
This Installation Guide only explains the installation of Yeastar S50 IPPBX. For more functionality
and advanced settings, please refer to the relative documents as below:
Document
Description
Yeastar S-Series Datasheet
Datasheet for the Yeastar S-Series IPPBX.
Yeastar S-Series Administrator Guide
The administrator could refer to this manual for
instructions on how to configure, operate, monitor,
and maintain the Yeastar S50 IPPBX.
Yeastar S-Series Extension User Guide
Users could refer to the guidel for instructions on how
to login the user portal, and how to configure their
accounts, listen to call recordings, check voicemail
messages, etc.
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
4/13
Before You Start
Before you begin to install the S50 IP Phone System, please check the package contents to verify
that you have received the items below. If there is any problem, please contact your provider.
Package Contents
1* S50 PBX
1* Ethernet Cable
1* Power Cord
2 Rack Mounting Kits
1* Grounding Stud & Nut
4* Rubber Feet
1* Warranty card
1* Quick Start Guide
Hardware Overview
Front Panel
System Indicator
Power Indicator RJ11 Port Reset
WAN
LAN Port Status
SD Slot
Rear Panel
Power Switch
ANT Sockets Power Inlet
Protective Earth
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
5/13
LED Indicators and Ports
LED Indicators
LED
Indication
Status
Description
POWER
Power status
On
The power is switched on
Off
The power is switched off
System
System status
Blinking
The system is running properly
Static/Off
The system goes wrong
WAN
WAN status
Blinking
Stable WAN port connection.
Off
No WAN port connection.
LAN
LAN status
Blinking
Stable LAN port connection.
Off
No LAN port connection.
Port Status
FXS
Green light
Static: The port is idle.
Blinking: There is an ongoing call on the port.
GSM/CDMA/3G
Red light
Static: the trunk is idle.
Blinking slowly: there is no SIM card inserted.
Blinking rapidly: the trunk is in use.
BRI
Orange light
Blinking slowly: the BRI line is
disconnected.
Static: the BRI line is connected or in use.
FXO
Red light
Blinking slowly: no PSTN line is
connected
to the port.
Static: the PSTN line is idle.
Blinking rapidly: the PSTN line is busy.
Port Description
Ports
Description
RJ11 Port
FXO port (red light): for the connection of PSTN lines or FXS ports of traditional
PBX.
FXS port (green light): for the connection of analog phones.
BRI port (orange light): for the connection of ISDN BRI lines.
Note: the sequence number of the ports corresponds to that of the Indicator
lights in the front panel. (I.e. the LED lights in the front indicate the connection
status of the corresponding ports at the front panel.)
ANT
Rotate the antenna into the Antenna Socket.
SD Slot
Insert a SD card.
Ethernet Port
Yeastar S50 supports two 10/100/1000M Ethernet ports.
LAN port: LAN port is for the connection to Local Area Network (LAN).
WAN port: WAN port is the network port for the connection to internet. It
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
6/13
supports „DHCP server‟, „PPPoE/dynamic DNS‟, and “static IP” for IP
address assignment.
Reset Button
Press and hold for 10 seconds to restore the factory defaults.
Power Inlet
Connect the supplied power supply to the port.
Power Switch
Switch on or off the device.
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
7/13
Installation
This chapter shows you how to install Yeastar S50 IP phone system.
Safety Disclaimers and Installation Warnings
To avoid unexpected accident, personal injury or device damage, please read the safety disclaimers
and installation warnings.
Power
Use only the power adapter provided with the IP PBX.
Keep the power off during the installation.
Make sure that the supply voltage matches the specifications indicated on the back panel of the
device.
To avoid the electric accident, do not open or remove the cover of IP PBX when it is working as
well as off the power.
Before cleaning the device, cut off the power supply.
Environment
Install the Yeastar S50 IP PBX in a location that is clean, free from vibration, electric shock, and
temperature/humidity extremes. The operating temperature should be kept below 104°F (40°C).
Module Installation
Yeastar S50 supports installing up to 2 modules. The optional modules are as below:
S2 Module
O2 Module
B2 Module
SO Module
GSM Module
CDMA Module
3G Module
NOTE
Before installing the module, please check if the module is clean and intact.
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
8/13
STEP 1 Loosen the screws on the enclosure and then remove the upper cover.
STEP 2 Insert the module to the Module Slot.
STEP 3 Insert a SIM card on the GSM/CDMA/3G module following the instructions. Skip this step if
no GSM/CDMA/3G module installed.
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
9/13
STEP 4 Fix the screws and close the cover.
STEP 5 Rotate the antenna into the Antenna Socket.
Skip this step if no GSM/CDMA/3G module installed.
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
10/13
Desktop Installation
WARNING
Please set 5~10cm gaps around the device for air circulation.
Please avoid any heavy thing placed on the device.
STEP 1 Place the IP PBX on a steady platform.
STEP 2 Remove the adhesive backing paper from the rubber feet.
STEP 3 Turn over the device and attach the supplied rubber feet to the recessed areas on the
bottom at each corner of the device.
Rack Installation
WARNING
Be careful not to drop any components. Dropping components may damage them or cause
an injury.
Only use the 19-inch rack mounting kits (attached bracket and fittings) included with the
PBX.
STEP 1 Fix the brackets to the left and right sides of the PBX with 4 screws.
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
11/13
STEP 2 Place the PBX in the 19-inch rack and fix both brackets to the rack with the rack‟s
proprietary mounting equipment.
Ground Connection
WARNING
Proper grounding (connection to ground) is very important to reduce the risk to the user of
electrocution or protect the PBX from the bad effects of external noise in the case of a
lightning strike.
A permanent connection between ground and the ground terminal of the PBX must be
made.
STEP 1 Tighten the provided M3*5 screw stud into the Grounding port on PBX.
STEP 2 Insert an 18AWG grounding wire (user supplied).
STEP 3 Tighten the provided M3 screw nut.
STEP 4 Attach the grounding wire to the grounding terminal.
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
12/13
Connecting the Equipment
STEP 1 Connect one end of a network cable to the LAN port of Yeastar device, and the other end
to any port of your company‟s LAN switch/router.
STEP 2 Connect the telephony line to the RJ11 port of the device.
RJ11 Port
Description
FXS
Connect one end of a RJ11 phone cable to the port. Connect the other end to
the analog phone or fax machine.
FXO
Connect an RJ11 cable to the FXO port. Connect the other end of the cable to a
PSTN line.
BRI
Connect the cable provided by the ISDN BRI provider to the BRI port. Connect
the other end of the cable to the ISDN provider equipment.
STEP 2 Plug the provided power cord into the power jack on S50 and the other end to a standard
electrical wall socket. Wait for the system to boot up till the SYSTEM LED starts to blink.
NOTE
Connect BRI/PSTN/analog phone/fax machine to the corresponding port based on the color of port
indicator.
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50

Yeastar S50 Installation Guide
13/13
Getting Started with the Configuration
Yeastar S50 IP Phone System provides web-based configuration interface for administrator. The
administrator can manage the device by logging in the Web interface.
Access path: https://192.168.5.150:8088
User Name: admin
Password: password
STEP 1 Connect your PC to the same network as Yeastar S50.
STEP 2 Start the browser on PC. In the address bar, enter the IP address, click “Enter”key and
then you can see the web GUI login page shows as below.
STEP 3 For the detailed configurations of extensions, trunks and other system settings, please
refer to the manual Yeastar S50 Administrator Manual.
NOTE
After saving the changes, remember to click the “Apply” button at the top-right corner to make the
changes take effect.
[END]
https://arttel.ru/
https://arttel.ru/shop/ip-ats/yeastar-s50