Yeti SMARTBENCH V1.1 User manual

Quick Start
Guide

Unit 1 Westfield Court | Barns Ground | Clevedon | Bristol | BS21 6FQ | UK
Tel No: [phone] | Email: [e-mail]
SMARTBENCH V1.1
1
EU Declaration of Conformity
We, Yeti Tool Limited
of Unit 1 Westfield Court, Barnes Ground, Clevedon, Bristol. BS21 6FQ UK
declare under our sole responsibility that the product(s):
Product Name
SmartBench
Model
Number(s)
SmartBench V1.1
Part Number(s)
20731, 20732, 20733
to which this declaration relates is(are) in conformity with the essential requirements and other relevant
requirements of EU Directive 2006/42/EC (MD),EU Directive 2014/53/EU (RED) and EU Directive 2011/65/EU
(RoHS2).
Type
Essential Requirements
Health & Safety
(RED article 3.1a)
EN 62368-1:2014
EN 60950-1:2006+A1:2010+A12:2011+A2:2013
EN 62311:2008
EN 62061:2005
EN ISO 19085-1:2017
EMC
(RED article 3.1b)
ETSI EN 301 489-1 V2.1.1 (2017-02)
in accordance with the specific requirements of:
ETSI EN 301 489-17 V3.1.1 (2017-02)
EN 55032:2012/AC:2013 Class A
EN 55035:2017
EN 61000-3-2:2014
EN 61000-3-3:2013
Spectrum
(RED article 3.2)
ETSI EN 300 328 V2.1.1 (2016-11)
ETSI EN 301 893 V1.8.1 (2015-03)
RoHS2
EN 50581:2012

Unit 1 Westfield Court | Barns Ground | Clevedon | Bristol | BS21 6FQ | UK
Tel No: [phone] | Email: [e-mail]
SMARTBENCH V1.1
2
United Kingdom 18th February 2019
Authorised signature for and on behalf of
Yeti Tool Limited
Ed Sells - Director
IMPORTANT
This is a class 1 machine: It’s power supply MUST be earthed. Only use the power cable
supplied. If you require a replacement, please contact your place of purchase.
European Representative:
Yeti Tool Limited
Unit 1 Westfield Court
Barnes Ground
Clevedon
Bristol
BS21 6FQ
United Kingdom
Tel: [phone]

Unit 1 Westfield Court | Barns Ground | Clevedon | Bristol | BS21 6FQ | UK
Tel No: [phone] | Email: [e-mail]
SMARTBENCH V1.1
3
Thank you for purchasing SmartBench!
Now that the large format, mobile CNC routing is unleashed, we hope you have a lot of fun
with your future projects. Please let us know how you get on - we are always keen to
receive feedback and follow what SmartBench creates!
What’s in the box
Start by getting familiar with SmartBench’s key components.
Check the contents. If any of the above items are damaged or missing, please contact your
point of purchase immediately.
Box 1
1 x Z Head assembly
1 x Console
Box 3
2x Leg Set
1 x IEC Power lead
1 x Extraction power lead
1x USB Stick
1x Tool kit (17/22mm spanner and 6mm
hex)
1x Wheel setting tool
Box 2
1x X Upper Beam
1x X Lower Beam
1x Y Bench

Unit 1 Westfield Court | Barns Ground | Clevedon | Bristol | BS21 6FQ | UK
Tel No: [phone] | Email: [e-mail]
SMARTBENCH V1.1
4
Key components
Figure 1: Y Bench
Figure 2: Z Head
Figure 3: Leg Set (x2)
Figure 4: Console
Figure 5: X Beam Upper
Figure 6: X Beam Lower

Unit 1 Westfield Court | Barns Ground | Clevedon | Bristol | BS21 6FQ | UK
Tel No: [phone] | Email: [e-mail]
SMARTBENCH V1.1
5
Fit Leg Set 1 –Opposite from Home End
Identify the home end of the Y Bench
(Figure 1, page 4) by looking for the Home Icon.
At the opposite end of the bench, fit Leg Set 1 by
first unfolding the legs.
Lift the Y Bench to accept the location pins of the
Leg Set. Slide the leg clamp pins into the slots in
the Y Bench end plate.
Push the clamp handles down flat to the Y Bench
end plate to tighten.
1
2
3
4

Unit 1 Westfield Court | Barns Ground | Clevedon | Bristol | BS21 6FQ | UK
Tel No: [phone] | Email: [e-mail]
SMARTBENCH V1.1
6
Fit the X Beam Lower
Unfold a Leg Set. Lift the Y Bench at the home end.
Use the leg set to support the Y bench. This should
be just past the first crossbeam.
To fit the X Beam Lower, offer up the beam
ensuring the home labels are aligned.
Ensuring the wheels are aligned with the channels,
push the X Beam Lower onto the Y bench.
You should feel some preload on the wheels as
they pop into place.
Push the X Beam Lower onto the Y Bench. The
assembly should look like this.
1
2
3
4
5
6

Unit 1 Westfield Court | Barns Ground | Clevedon | Bristol | BS21 6FQ | UK
Tel No: [phone] | Email: [e-mail]
SMARTBENCH V1.1
7
Fit Leg Set 2
Lift the Y Bench by the end plate, and take Leg set
2 with the other hand.
Lift the Y Bench to accept the location pins of the
Leg Set. Slide the leg clamp pins into the slots in
the Y Bench end plate.
Push the clamp handles down flat to the Y Bench
end plate to tighten.
Push the clamp handles down flat to the Y Bench
end plate to tighten.
1
2
3
4

Unit 1 Westfield Court | Barns Ground | Clevedon | Bristol | BS21 6FQ | UK
Tel No: [phone] | Email: [e-mail]
SMARTBENCH V1.1
8
Attach the X Beam Upper
Slide the X Beam Upper onto the lower X Beam
Lower as shown above.
The forks on the end of the X Beam Upper should
slide on the skids of the X Beam Lower with very
little force.
Secure in place by tightening the clamps on each
end of the beam.
Slide the cables by the drag chain latch plate so
that they are laid flat and extend from the end of
the X Beam Upper
1
2
3
4

Unit 1 Westfield Court | Barns Ground | Clevedon | Bristol | BS21 6FQ | UK
Tel No: [phone] | Email: [e-mail]
SMARTBENCH V1.1
9
Fit the Z Head
To Fit the Z Head, offer up the Z head ensuring
the extraction elbow is facing towards you.
Load the Z head by inserting the wheels into
the channels until the Z head holds onto the
beam. This should be just passed the first
wheel.
Place the drag chain latch plate over the
protruding face on the side of the Z Head
bottom plate ensuring the signal cable seats
into the recess.
Secure this in place with the thrubmscrew
provided.
Plug in the signal cable and secrure with the
thumbscrew.
Place the drag chain latch plate over the
protruding face on the side of the Z Head.
1
2
3
4
5
6