YitaHome BFTLPT-1003 User manual

2
Product specification:
SKU
1. 10L fresh water tank.
2. Piston pump with T-type flush nozzle.
3. 20L waste holding tank.
4. Level indicator shows the level of waste water.
5. Rotating emptying spout and air release valve for a comfortable emptying.
BFTLPT-1003
ASSEMBLY INSTRUCTIONS
Portable Toilet

3
ASSEMBLY INSTRUCTIONS
1. Please always assemble according to the instruction.
2. Ensure water supply pressure is no more than 0.4Mpa.
3. Hot water more than 40 degrees is forbidden.
!
Tip:
BFTLPT-1003 Toilet x1
Manual x1
Product List
USER MANUAL AND CARE INSTRUCTIONS
3320T
10L Fresh water tank
20L Waste holding
tank
Latch assembly
Toilet
lid
Piston
pump
Water fill mouth
Slide valve assembly
Toilet
seat
PARTS
Level
Indicator
Emptying spout Clean
Water fill mouth
Latch assembly
Emptying spout Clean
Slide valve assembly
Level indicator
20L Waste holding tank
10L Fresh water tank
Toilet lid
Toilet seat
Piston pump

4
ASSEMBLY INSTRUCTIONS
Use Operation:
① Place on smooth ground.
② Ensure all latches are locked.
③ Ensure the waste holding tank is assembled correctly and the cap is
screwed on correctly.
④ Bearing weight limit is no more than 200 kg.
⑤ Do not lean on seat cover when using.
① Fill the tank with fresh water.
② Open slide valve.
③ Open seat cover.
④ Press piston pump for flushing.
⑤ Close slide valve.
●Place on smooth ground
●Ensure all latches are locked
●Ensure the waste holding tank is assembled correctly and cap is
screwed on correctly.
●Bearing weight limit is no more than 200 kg
●Do not lean on seat cover when using
Cau�on:
Use opera�on:
!
Caution:

5
Emptying spout
Green = Empty Red = Full
indicator
Op�onal toilet sprayer:
ASSEMBLY INSTRUCTIONS
Clean Operation:
① Open the latch.
② Move away the fresh water tank.
③ Empty the waste holding tank.
④ Replace the fresh water tank.
⑤ Close the latch.
Maintenance and Storage
① Clean the tanks for long time storage.
② Lubricate slide valve periodically with lubrication
( Vaseline suggested).
③ Relax the waste holding tank cap for long time storage.
④ Avoid strong sunlight and high temperature.
Level indicator
Green = Empty Red = Full
Exhaust valve
Press the valve to prevent spill
before use or to prevent splash
when emptying
Emptying spout
Rotating out the spout when
you emptying the tank