YitaHome BFTLPT-1014 User manual

ASSEMBLY INSTRUCTIONS
Pure & Easy
● Place on a flat surface.
● Ensure all latches are locked.
● Ensure the waste holding tank is assembled correctly and the cap is
screwed on correctly.
● Weight bearing limit is no more than 200 kg.
● Do not lean on the seat cover during operation.
● Do not use water with a temperature higher than 40 degrees.
Caution:
PORTABLE UPGRADED TOILET
BFTLPT-1014
PORTABLE UPGRADED TOILET
BFTLPT-1014

ASSEMBLY INSTRUCTIONS
1 2
ASSEMBLY INSTRUCTIONS
Using Instructions:
5
3
2
1.Fill the tank with freshwater.
2. Ensure the waste holding tank is assembled correctly and the cap is
screwed on correctly.
3.Open the slide valve.
4.Open the seat cover.
5.Use the toilet.
6.Pull the piston flush pump first and press it to flush.
7.Use the handheld sprayer clean the dead corner.
8.Close the slide valve.
1.Open the latch.
2.Move away the freshwater tank.
3.Empty the waste holding tank.
4.Replace the fresh tank.
5.Close the latch.
Cleaning Instructions:
12
4
3
8
3
1
5
4
1
2
2
6
7

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
3 4
1.Handheld Sprayer
Green = Empty Red = Full
Air Release Valve
Press the valve to prevent spilling
prior to use or to prevent splashes
when emptying.
Level indicator Rotating Pour Spout
Rotate this pour spout when
emptying the tank.
Accessories:
2.Sprayer Storage & Phone Holder
1.Clean the tanks regularly in order to achieve long term storage.
2.Lubricate the slide valve periodically with lubricants (Vaseline rec-
ommended).
3.Release the waste holding tank cap for long term storage.
4.Avoid strong sunlight and high temperature.
5. If the piston pump is hard to pull up, pull it out and add lubricants
to the inside rings or open the fresh water tank cap to maintain pres-
sure balance before use.
Maintenance and Storage: