YitaHome BFTLPT-1007 User manual

ASSEMBLY INSTRUCTIONS
PORTABLE TOILET
Pure & Easy
CONTACT US:
If you have any questions about the installation of YITAHOME products，
just contact us at [phone] from Mon-Fri 8:00 AM-16:30 PM PST
/ Sat. 8:00 AM-12:00 PM PST or E-mail us at: [e-mail]
Alternative method to contact us(amazon.com orders only)
1.Log into your amazon account
2.Go to "Your Orders" and find the purchase
3.Click on "Contact Seller"
BFTLPT-1007QDCH-V1

ASSEMBLY INSTRUCTIONS
1 2
ASSEMBLY INSTRUCTIONS
● Place on a flat surface.
● Ensure all latches are locked.
● Ensure the waste holding tank is assembled correctly and the cap
is screwed on correctly.
● Weight bearing limit is no more than 200 kg.
● Do not lean on the seat cover during operation.
● Ensure water supply pressure is no more than 0.4Mpa.
● Do not use water with a temperature higher than 40 degrees.
1. Fill the tank with freshwater.
2. Open the slide valve.
3. Open the seat cover.
4. Pull the piston flush pump first and press it to flush.
5. Close the slide valve.
12L Fresh Water Tank
Latch assembly
Toilet lid
Piston flush pump
Water inlet
Slide valve assembly
Toilet seat
Level Indicator
M60 pour spout
T flush nozzle
Air release valve
Slide valve handle
22L Waste Holding Tank
Caution:Product Structure
Operation Instruction:

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
3 4
1. Open the latch.
2. Move away the freshwater tank.
3. Empty the waste holding tank.
4. Replace the freshwater tank.
5. Close the latch.
1. Clean the tanks regularly in order to achieve long term storage.
2. Lubricate the slide valve periodically with lubricants
(Vaseline recommended).
3. Release the waste holding tank cap for long term storage.
4. Avoid strong sunlight and high temperature.
5. If the piston pump is hard to pull up, pull it out and add lubricants
to the inside rings or open the fresh water tank cap to maintain
pressure balance before use.
Cleaning Instructions : Maintenance and Storage
Accessories:
Green = Empty Red = Full
Air Release Valve
Press the valve to prevent spilling
prior to use or to prevent splashes
when emptying.
Level indicator Rotating Pour Spout
Rotate this pour spout when
emptying the tank.
This cap can be screwed
onto the Water inlet
opening of all CHH products
CHH-627 Toilet Sprayer