
• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with EN 1677 and ASTM A952/ A
952M.
• Proof Load tested at 2.5 times the WLL with certication for
each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL.
• Tempering temperature at a minimum of 400°C.
• Each link is marked with batch number that links to the test
certicate with full traceability to raw materials.
• Fully integrated shortening clutch and master link.
• No reduction in WLL when shortening chain.
• Speedy assembly.
• Light weight system.
• Cost effective compared to slings which use multiple
components.
G100 2 Leg Assembly
Item No. WLL
For
Grade 100
Chain
Can be used
on single
hook Acc. To
DIN15401 No. Dimensions (mm) N.W.
tonnes mm DA B K kg
X-A05-06 2.0 6 4 13 120 70 196 0.9
X-A05-08 3.5 7,8 619 160 95 262 2.2
X-A05-10 5.6 10 10 22 170 105 295 3.8
X-A05-13 9.4 13 10 28 190 110 348 7.0
X-A05-16 14.0 16 12 32 230 130 432 13.6
★Design factor 4:1 proof tested and certied.
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
WARNING
Copyright © 2020
YOKE Industrial Corp.
All Rights Reserved.
26
100
Grab Chain Sling