Toc-1
<Int> <Rev>
IM 05E01B02-41E
CONTENTS
1. Installation .............................................................................................. 1-1
1.1 Model and Suffix Codes.................................................................................. 1-1
1.2 How to Install................................................................................................... 1-2
1.3 How to Connect Wires .................................................................................... 1-5
1.4 Hardware Specifications ................................................................................ 1-7
1.5 Terminal Wiring Diagrams ............................................................................ 1-13
2. Initial Settings ......................................................................................... 2-1
2.1 Names and Functions of Front Panel Parts ................................................... 2-2
2.2 Setting PV Input Type (Setting First at Power-on) ......................................... 2-3
2.3 Changing PV Input Type ................................................................................. 2-8
2.4 Setting Control Output Type ......................................................................... 2-10
2.5 Initializing Parameters .................................................................................. 2-13
3. Programming .......................................................................................... 3-1
3.1 Overview of Program Patterns ....................................................................... 3-1
3.2 Example of Program Pattern Setup Charts ................................................... 3-2
3.3 Creating Program Patterns............................................................................. 3-4
3.4 Changing Program Patterns..........................................................................3-11
3.5 Program Parameter Map ............................................................................... 3-14
3.6 Lists of Program Parameters ....................................................................... 3-16
3.7 Program Pattern Setup Charts ..................................................................... 3-21
3.8 Explanation of Program Functions .............................................................. 3-24
4. Operations .............................................................................................. 4-1
4.1 Monitoring-purpose Operating Displays Available during Operation ......... 4-1
4.2 Performing/Canceling Auto-tuning ................................................................ 4-4
4.3 Setting PID Manually....................................................................................... 4-5
4.4 Selecting the Program Pattern Number (PT.No) ............................................ 4-7
4.5 Switching between RUN and RESET Modes ................................................. 4-8
4.6 Switching between AUTO and MAN ............................................................... 4-9
4.7 Manipulating Control Output during Manual Operation ............................. 4-10
4.8 Enabling/Disabling the Hold Mode of Program Operation ......................... 4-12
4.9 Changing Program Setpoints when in Hold Mode ...................................... 4-13
4.10 Executing the “Advance” Function ............................................................. 4-14
4.11 Switching to Local-mode (LOCAL) Operation ............................................. 4-15
4.12 Changing Setpoints during Local-mode Operation .................................... 4-16
1st Edition : May 31,2000-00
Model UP750
Program Controller
User’s Manual for Single-loop Control
IM 05E01B02-41E 1st Edition
