YOODA ARTISTIC 1R User manual

In order to fully explore available functions of ARTISTIC series please take a moment and read this manual before using the device.
ARTISTIC transmitters are compatible with all YOODA brand devices.
Illustrations (from the top):
Fig. 1. 15-channel ARTISTIC remote control with display, black (ARTISTIC_15R_B)
Fig. 2. Single-channel ARTISTIC remote control, white (ARTISTIC_1R)
General information
Detailed description
1. Control:
can control single motor, or a group
of up to 20 motors on each channel
2. Range:
200 meters outdoor,
35 meters indoor
3. Battery:
1 x CR2430
4. Power supply:
3 V
5. Dimensions:
130 x 44 x 10 mm
6. Transmitting power:
10 mW
7. Operating temperature:
from 0°C to 50°C
8. Protection degree:
IP 30
Radio receiver range is a variable value and can differ from declared values depending on conditions in which device
operates. Possible sources of changes in range are building construction, interference caused by other radio transmitters
etc.
LCD display
next
channel
previous
channel
UP button
PREVIOUS CHANNEL button
P2
programming button
battery cover
DOWN button
15-channel transmitter
(front)
15-channel transmitter
(back)
NEXT CHANNEL button
STOP button
ARTISTIC_1R | ARTISTIC_5R | ARTISTIC_15R
www.sukcesgroup.pl

1. Estimated battery lifespan is 3 year if the device runs 4 commends a day in average.
2. Batteries should be changed when LED diode stops flashing when channel is being changed or receiving device stops
reacting to commands.
3. When placing the battery ensure that polarity is correct.
4. Choosing ‘00’ group channel means remote controls all programmed devices on all channels at the same time. No
programming
functions can be performed on group channel. All devices programmed to any other channel can be controlled on group
channel without additional programming.
Batteries contain substances that may be hazardous to health and may pollute the environment. Used batteries should
be disposed of properly.
UP button
current
channel
STOP button
P2
programming button
battery
cover
DOWN button
Single-channel transmitter
(front)
5-channel transmitter
(front)
Single-channel or 5-channel transmitter
(back)
In order to fully explore available functions of ARTISTIC series please take a moment and read this manual before using the device.
ARTISTIC transmitters are compatible with all YOODA brand devices.
Detailed description
Programming first transmitter to R-type motors
UP button
PREVIOUS CHANNEL
button
DOWN button
NEXT CHANNEL
button
STOP button
1. Way of programming first transmitter depends on type of radio receiver. When programming first transmitter please
follow instruction of the device that is going to be controlled by the transmitter.
2. Longer than 5 seconds pause between series of button clicks during programming will cause device to switch off from
programming mode without saving any changes.
3. Programming transmitter using this ethod will result in deleting receiver memory.
Turn on power supply or press
microswitch (for 2 sec.) when
power is on.
Motor will make a sound.
Roller shutter will make
an up/down move.
Motor will
make a sound.
Press
programming button
(P2) on the remote.
or
Roller shutter
will make
an up/down move
and the motor will make
a few short sounds.
Motor will
make a sound.
Press
programming button
(P2) on the remote.
Press
UP button
on the remote.
ARTISTIC_1R | ARTISTIC_5R | ARTISTIC_15R
www.sukcesgroup.pl