York YCD18 THRU 60 Quick start guide

TECHNICAL GUIDE
LX SERIES
SPLIT SYSTEM
AIR CONDITIONERS
13 SEER – R-410A – 1 PHASE
1.5 THRU 5 NOMINAL TONS
MODELS: YCD18 THRU 60
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.upgnet.com and www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Standard 5-Years limited parts warranty.
Standard 10-Years limited compressor warranty.
Extended 10-Years limited parts warranty when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or Internet sales.
See Limited Warranty certificate in User's Information Manual for details.
FOR INSTALLATION ONLY IN
US NORTHERN REGION AND CANADA
Installation Allowed
®
5495504-YTG-B-0518
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The YCD models are part of our successful LX Series split sys-
tem air conditioner lineup. Optimized for the 13 SEER Regional
Minimum Efficiency in the North US and Canada, these outdoor
units are specifically designed to be matched with Johnson
Controls Unitary Products indoor coils, furnaces, and air han-
dlers to provide a complete system solution.
FEATURES
•Small Footprint - Minimum footprint for easier handling,
transportation, and installation.
•Easier Installation - Independent panels provide quick
access for unit setup. Installation time is reduced by easy
power and control wiring access. Options are provided for
indoor piston or TXV. The factory installed filter-drier and fac-
tory charge for a 15-Ft lineset means less time spent brazing
and charging the system. The small base dimension and
reduced unit clearances make for easier retrofits.
•Accessible Information - QR code on unit provides quick
access to technical documents and warranty information.
•Durable Finish - The coated steel wire fan guard, coated
external fasteners, and pre-treated G90-equivalent galva-
nized steel chassis components resist corrosion and rust
creep. Champagne colored powdercoat paint further protects
external panels.
•Quality Coils - The high efficiency microchannel aluminum
coil is manufactured using an improved material system pro-
viding reliable performance and small unit size.
•Rugged Coil Protection - Coils are protected from mechan-
ical damage by a proven stamped steel coil guard design.
•Protected Compressor - Compressors are protected inter-
nally by a high pressure relief valve and a temperature sen-
sor, and externally by the system high pressure switch. The
liquid line filter-drier is factory installed to protect the com-
pressor against moisture and debris.
•Reliable Operation - Ball bearing fan motors provide supe-
rior performance in extreme temperatures.
•Environmentally Friendly - CFC-free R-410A refrigerant
delivers environmentally friendly performance with zero
ozone depletion.
•Top Discharge - Warm air is blown up, away from the struc-
ture and any landscaping and allows compact location on
multi-unit applications.
•Low Operating Sound Levels - Developed using CFD and
FEA tools, the sturdy cabinet and top design provides sound
performance of 77 dBA or lower. Compatible accessories for
further sound reduction are also available.
•Better Service Access - Diagonal base valves with open
access for low-loss fittings, single panel access to the electri-
cal controls, swing out control box for full corner access, and
removable fan guard allow easy access for unit mainte-
nance.
•Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.

5495504-YTG-B-0518
2 Johnson Controls Unitary Products
LIST OF SECTIONS
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PHYSICAL AND ELECTRICAL DATA . . . . . . . . . . . . . . . . . . . . . . . 3
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
COOLING CAPACITY - With Air Handler Coils . . . . . . . . . . . . . . . 5
COOLING CAPACITY - Upflow, Downflow &
Horizontal Furnaces and Coils (Coil Only Ratings) . . . . . . . . . . . 9
COOLING CAPACITY - With High Efficiency Motor Furnaces . . 11
APPLICATIONS AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . . 37
SOUND POWER RATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
MECHANICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . 38
TYPICAL INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
TYPICAL FIELD WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
ALTERNATIVE INSTALLATION CLEARANCES . . . . . . . . . . . . . . 40
PERFORMANCE DATA - 1.5 TON . . . . . . . . . . . . . . . . . . . . . . . . . 41
PERFORMANCE DATA - 2 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 44
PERFORMANCE DATA - 2.5 TON . . . . . . . . . . . . . . . . . . . . . . . . . 48
PERFORMANCE DATA - 3 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 52
PERFORMANCE DATA - 3.5 TON . . . . . . . . . . . . . . . . . . . . . . . . . 56
PERFORMANCE DATA - 4 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 60
PERFORMANCE DATA - 5 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 64
NOMENCLATURE
BRAND YY= York
PRODUCT TYPE CC= Air Conditioner
NOMINAL
SERIES EFFICIENCY
AND STAGING DD= 13 SEER / 1-Stage
(US Northern Region)
NOMINAL
UNIT CAPACITY
(MBH) 36
18 = 1.5 Ton 42 = 3.5 Ton
24 = 2 Ton 48 = 4 Ton
30 = 2.5 Ton 60 = 5 Ton
36 = 3 Ton
REFRIGERANT BB= R-410A
VOLTAGE
(Voltage-Phase-Hertz) 22= 208/230-1-60
GENERATION
(MAJOR REVISION) 11= 1st Gen
2= 2nd Gen
etc
FACTORY OPTION SS= Standard (No Options)
H= Hard Start Kit
STYLE LETTER
(MINOR REVISION)
NOT USED
FOR ORDERING
AA= Style A
B= Style B
etc

5495504-YTG-B-0518
Johnson Controls Unitary Products 3
‡ Adapter fitting must be field installed for the required 1-1/8” line set.
All dimensions are in inches and are subject to change without notice.
Overall height is from bottom of base pan to top of fan guard.
Overall length and width include screw heads.
PHYSICAL AND ELECTRICAL DATA
MODEL YCD18
B21(H,S) YCD24 B21(H,S) YCD30 B21(H,S) YCD36 B21(H,S) YCD42 B21(H,S) YCD48 B21S YCD60 B21S
Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range 1
1. Rated in accordance with AHRI Standard 110-2012, utilization range “A”.
187 to 252
Minimum Circuit Ampacity 9.6 12.3 14.2 19.9 21.9 28.5 34.3
Max. Overcurrent Device Amps 2
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
15 20 20 30 35 50 60
Min. Overcurrent Device Amps 3
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
15 15 15 20 25 30 35
Compressor Type Recip Recip Recip Recip Recip Scroll Scroll
Compressor
Amps Rated Load 7.0 9.2 10.7 14.7 16.5 21.8 26.4
Locked Rotor 45.0 45.0 57.0 78.0 88.0 117 134
Crankcase Heater No No No No No No No
Factory External Discharge Muffler No No No No Yes No No
HS Kit Required with TXV 4
4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.
Yes* Yes* Yes* Yes* Yes* No No
Fan Diameter Inches 18 18 18 18 22 22 22
Fan Motor
Rated HP 1/8 1/8 1/8 1/4 1/4 1/4 1/4
Rated Load Amps 0.80 0.80 0.80 1.50 1.30 1.30 1.30
Nominal RPM 1075 1075 1075 1100 850 850 850
Nominal CFM 1925 1950 2150 2575 2925 3225 3350
Coil Face Area Sq. Ft. 8.26 9.78 11.07 12.37 12.22 13.83 17.37 Rows Deep 1111111
Fins / Inch 23 23 23 23 23 23 23
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed) 5
5. For applications with non-standard vapor line sizes, see the “Applications & Accessories” section of this Technical Guide.
3/4 3/4 3/4 3/4 7/8 7/8 1-1/8‡
Unit Charge (Lbs. - Oz.) 6
6. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract
the amount of refrigerant, using the difference in actual lineset length (not the equivalent length) multiplied by the per foot value.
2 - 15 3 - 4 3 - 13 4 - 1 4 - 6 4 - 8 5 - 6
Charge Per Foot, Oz. 0.62 0.62 0.62 0.62 0.67 0.67 0.75
Operating Weight Lbs. 125 130 140 140 175 165 175
Models with "H" on the end of the model number are shipped with a Hard Start Kit installed at the factory.
A
C
B
A0339-001
DIMENSIONS
Unit
Model
Dimensions
(Inches) Refrigerant Connection Service Valve Size
A B C Liquid Vapor
YCD18B21(H,S) 23-1/2 24 24
3/8
3/4
YCD24B21(H,S) 26-3/4 24 24
YCD30B21(H,S) 30 24 24
YCD36B21(H,S) 33-1/4 24 24
YCD42B21(H,S) 26-3/4 29-1/4 29-1/4 7/8
YCD48B21S 30 29-1/4 29-1/4
YCD60B21S 36-1/4 29-1/4 29-1/4 7/8‡

5495504-YTG-B-0518
4 Johnson Controls Unitary Products
CHARGING PROCEDURES:
1. Check the Factory Unit Charge listed on the unit nameplate to verify the refrigerant charge for the outdoor unit, the smallest matched indoor unit, and the 15 feet
of interconnecting lineset.
2. Verify the indoor metering device and additional charge required for the specific matched indoor unit in the system using the above table.
3. Add additional charge for the amount of interconnecting lineset greater than 15 feet at the rate specified in the Physical and Electrical Table.
4. For installations requiring additional charge, weigh in refrigerant for the specific matching indoor unit and actual lineset length.
5. Once the charge adders for matched indoor unit and for lineset have been weighed in, verify the system operation against the temperatures and pressures in the
Charging Chart for the outdoor unit. Locate Charging Charts on the outdoor unit and also in the Service Data Application Guide on www.upgnet.com. Follow the
Subcool or the Superheat charging procedure in the Installation Manual according to the type of indoor metering device in the system, and allow ten minutes after
each charge adjustment for the system operation to stabilize. Record the charge adjustment made to match the Charging Chart.
6. Permanently stamp the unit data plate with the TOTAL SYSTEM CHARGE defined as follows: TOTAL SYSTEM CHARGE = Base Charge (as shipped) + charge
adder for matched indoor unit + charge adder for actual lineset length + charge adjustments to match the Charging Chart.
SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS
Outdoor Unit YCD18
B21(H,S) YCD24 B21(H,S) YCD30 B21(H,S) YCD36 B21(H,S) YCD42 B21(H,S) YCD48 B21S YCD60 B21S
Required Orifice or TXV 1,2
1. For applications requiring a TXV, use S1-1TVM*** series kit.
2. Approved orifice(s) shipped with outdoor unit.
0.047 / BA1 0.057 / BA1 0.063 / BA1 0.067 / BC1 0.073 / BC1 0.077 / BC1 0.084 / BD1
Indoor Unit 3,4,5
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.
4. CF coils cannot be used in horizontal applications.
5. Charge adders shown above do not indicate that coils are rated for every application. Refer to Performance Data Tables for actual performance for specified sys-
tem matches. Obtain certified system ratings from www.ahridirectory.org.
Additional Charge, oz
AP18B 0––– – – –
AP24B 30–– – – –
AP30B 10 7 2 – – – –
AP36B 10 7 2 0 – – –
AP36C – 11 2 2 – – –
AP42C – 11 2 2 0 – –
AP48(C,D) –––5 2 0 –
AP60(C,D) –––– 9 2 0
AE18B 0––– – – –
AE24B 30–– – – –
AE30B 850– – – –
AE36(B,C) 10 7 2 0 – – –
AE42C –––5 2 – –
AE48(C,D) –––5 2 0 –
AE60C –––– 9 2 0
AE60D ––––29ozTXV ONLY 22 oz TXV ONLY 20 oz TXV ONLY
AVC18B 0––– – – –
AVC24B 30–– – – –
AVC30B 850– – – –
AVC36(B,C) 10 7 2 0 – – –
AVC42C –––5 2 – –
AVC48(C,D) –––5 2 0 –
AVC60C –––– 9 2 0
AVC60D ––––29ozTXV ONLY 22 oz TXV ONLY 20 oz TXV ONLY
CF/CM/CU18(A,B) 0––– – – –
CF/CM/CU24(A,B) 30–– – – –
CF/CM/CU30(A,B,C) 850– – – –
CF/CM/CU36(A,B,C,D) 10 7 2 0 – – –
CF/CM/CU42(B,C,D) – 11 2 2 0 – –
CF/CM/CU48(C,D) –––5 2 0 –
CF/CM/CU60(C,D) –––– 9 2 0
CF/CM64D ––––29ozTXV ONLY 22 oz TXV ONLY 20 oz TXV ONLY
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.
FOOTNOTES:

5495504-YTG-B-0518
Johnson Controls Unitary Products 5
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
YCD18B21(H,S) AE18BX21 17.5 – 600 18.0 13.8 15.00 12.75
YCD18B21(H,S) AE24BX21 17.5 – 600 18.0 13.8 15.00 12.75
YCD18B21(H,S) AE30BX21 17.5 – 600 18.0 14.0 15.00 12.75
YCD18B21(H,S) AE36BX21 17.5 – 625 18.0 13.9 14.50 12.50
YCD18B21(H,S) AE36CX21 21.0 – 600 18.0 13.6 14.25 12.25
YCD18B21(H,S) AP18BX21 17.5 – 600 18.0 13.8 13.50 11.50
YCD18B21(H,S) AP24BX21 17.5 – 600 18.0 13.8 13.00 11.25
YCD18B21(H,S) AP30BX21 17.5 – 600 18.0 13.6 13.50 11.50
YCD18B21(H,S) AVC18BX21 17.5 – 600 18.0 13.8 15.00 12.75
YCD18B21(H,S) AVC24BX21 17.5 – 600 18.0 13.9 15.00 12.75
YCD18B21(H,S) AVC30BX21 17.5 – 600 18.0 13.9 15.00 12.75
YCD18B21(H,S) ME08BN21 17.5 CF/CM18B 600 18.0 13.8 15.00 12.75
YCD18B21(H,S) ME08BN21 17.5 CF/CM24B 600 18.0 13.9 15.00 12.75
YCD18B21(H,S) ME08BN21 17.5 CF/CM30B 600 18.0 13.9 15.00 12.75
YCD18B21(H,S) ME08BN21 17.5 CF/CM36B 600 18.0 13.8 15.00 12.75
YCD18B21(H,S) ME12BN21 17.5 CF/CM18B 600 18.0 13.8 13.75 11.75
YCD18B21(H,S) ME12BN21 17.5 CF/CM24B 625 18.0 14.0 14.00 12.00
YCD18B21(H,S) ME12BN21 17.5 CF/CM30B 625 18.0 14.0 14.25 12.25
YCD18B21(H,S) ME12BN21 17.5 CF/CM36B 650 18.0 14.2 14.50 12.25
YCD18B21(H,S) MVC08BN21 17.5 CF/CM18B 550 18.0 13.4 15.00 12.75
YCD18B21(H,S) MVC08BN21 17.5 CF/CM24B 575 18.0 13.6 15.00 12.75
YCD18B21(H,S) MVC08BN21 17.5 CF/CM30B 600 18.0 13.9 15.00 12.75
YCD18B21(H,S) MVC12BN21 17.5 CF/CM36B 675 18.0 14.4 15.00 12.75
YCD24B21(H,S) AE24BX21 17.5 – 800 24.0 17.8 14.25 12.00
YCD24B21(H,S) AE30BX21 17.5 – 800 24.0 17.8 14.50 12.25
YCD24B21(H,S) AE36BX21 17.5 – 800 24.0 17.8 14.75 12.25
YCD24B21(H,S) AE36CX21 21.0 – 800 24.0 17.8 15.00 12.50
YCD24B21(H,S) AP24BX21 17.5 – 800 23.8 17.4 13.00 11.00
YCD24B21(H,S) AP30BX21 17.5 – 800 24.0 17.6 13.50 11.50
YCD24B21(H,S) AP36BX21 17.5 – 900 24.0 18.4 13.00 11.25
YCD24B21(H,S) AP36CX21 21.0 – 850 24.0 18.0 13.00 11.25
YCD24B21(H,S) AVC24BX21 17.5 – 750 24.0 17.4 14.00 11.75
YCD24B21(H,S) AVC30BX21 17.5 – 775 24.0 17.4 14.75 12.25
YCD24B21(H,S) AVC36BX21 17.5 – 800 24.0 17.8 15.00 12.50
YCD24B21(H,S) AVC36CX21 21.0 – 800 24.0 17.6 15.00 12.50
YCD24B21(H,S) ME08BN21 17.5 CF/CM24B 800 24.0 17.8 14.25 12.00
YCD24B21(H,S) ME08BN21 17.5 CF/CM30B 800 24.0 17.8 14.75 12.25
YCD24B21(H,S) ME08BN21 17.5 CF/CM36B 800 24.0 17.6 14.75 12.25
YCD24B21(H,S) ME08BN21 17.5 CF42B 875 24.0 18.2 14.75 12.25
YCD24B21(H,S) ME12BN21 17.5 CF/CM24B 800 24.0 17.8 14.25 12.00
YCD24B21(H,S) ME12BN21 17.5 CF/CM30B 825 24.0 18.0 14.75 12.25
YCD24B21(H,S) ME12BN21 17.5 CF/CM36B 800 24.0 17.6 14.50 12.25
YCD24B21(H,S) ME12BN21 17.5 CF42B 800 24.0 17.8 14.75 12.25
YCD24B21(H,S) ME14DN21 24.5 CF/CM30D 800 24.0 17.8 14.00 11.75
YCD24B21(H,S) ME14DN21 24.5 CF/CM36D 850 24.0 18.0 14.25 12.25
YCD24B21(H,S) ME14DN21 24.5 CF/CM42D 800 24.0 17.6 14.25 12.00
YCD24B21(H,S) ME16CN21 21.0 CF/CM24C 875 24.0 18.2 13.25 11.25
YCD24B21(H,S) MVC08BN21 17.5 CF/CM24B 800 24.0 17.8 14.25 12.00
YCD24B21(H,S) MVC08BN21 17.5 CF/CM30B 700 24.0 17.2 14.50 12.25
YCD24B21(H,S) MVC08BN21 17.5 CF/CM36B 775 24.0 17.4 14.50 12.25

5495504-YTG-B-0518
6 Johnson Controls Unitary Products
YCD24B21(H,S) MVC08BN21 17.5 CF42B 800 24.0 17.8 14.75 12.25
YCD24B21(H,S) MVC12BN21 17.5 CF/CM24B 800 24.0 17.8 14.25 12.00
YCD24B21(H,S) MVC12BN21 17.5 CF/CM30B 850 24.0 18.2 14.50 12.25
YCD24B21(H,S) MVC12BN21 17.5 CF/CM36B 775 24.0 17.4 14.50 12.25
YCD24B21(H,S) MVC12BN21 17.5 CF42B 800 24.0 17.8 14.75 12.25
YCD24B21(H,S) MVC14DN21 24.5 CF/CM30D 800 24.0 17.8 15.00 12.50
YCD24B21(H,S) MVC14DN21 24.5 CF/CM36D 850 24.0 18.0 15.00 12.50
YCD24B21(H,S) MVC14DN21 24.5 CF/CM42D 825 24.0 18.0 15.00 12.50
YCD24B21(H,S) MVC16CN21 21.0 CF/CM42C 900 24.0 18.6 15.00 12.50
YCD30B21(H,S) AE30BX21 17.5 – 825 29.4 20.2 14.00 12.00
YCD30B21(H,S) AE36BX21 17.5 – 1000 30.0 22.2 14.00 12.00
YCD30B21(H,S) AE36BX21 17.5 – 975 30.0 22.2 14.00 12.00
YCD30B21(H,S) AE36CX21 21.0 – 1000 30.0 22.0 14.50 12.25
YCD30B21(H,S) AP30BX21 17.5 – 1000 30.0 21.8 13.00 11.25
YCD30B21(H,S) AP36BX21 17.5 – 1000 30.0 21.8 13.00 11.25
YCD30B21(H,S) AP36CX21 21.0 – 1000 30.0 21.6 13.00 11.25
YCD30B21(H,S) AP42CX21 21.0 – 1100 30.0 22.6 13.00 11.00
YCD30B21(H,S) AVC30BX21 17.5 – 975 30.0 21.8 13.75 11.75
YCD30B21(H,S) AVC36BX21 17.5 – 975 30.0 22.2 14.25 12.25
YCD30B21(H,S) AVC36CX21 21.0 – 975 30.0 22.0 14.50 12.50
YCD30B21(H,S) ME08BN21 17.5 CF/CM30B 900 29.8 21.0 14.00 12.00
YCD30B21(H,S) ME08BN21 17.5 CF/CM36B 900 30.0 21.0 14.00 12.00
YCD30B21(H,S) ME08BN21 17.5 CF42B 875 29.8 20.8 14.00 12.00
YCD30B21(H,S) ME12BN21 17.5 CF/CM30B 825 29.4 20.0 14.00 12.00
YCD30B21(H,S) ME12BN21 17.5 CF/CM36B 1025 30.0 22.0 14.00 12.00
YCD30B21(H,S) ME12BN21 17.5 CF42B 975 30.0 21.8 14.00 12.00
YCD30B21(H,S) ME14DN21 24.5 CF/CM30D 1050 30.0 22.8 14.50 12.25
YCD30B21(H,S) ME14DN21 24.5 CF/CM36D 1025 30.0 22.0 14.50 12.50
YCD30B21(H,S) ME14DN21 24.5 CF/CM42D 1000 30.0 21.8 14.75 12.25
YCD30B21(H,S) ME16CN21 21.0 CF/CM30C 1075 30.0 22.6 13.75 11.75
YCD30B21(H,S) ME16CN21 21.0 CF/CM36C 1100 30.0 22.6 13.75 11.75
YCD30B21(H,S) ME16CN21 21.0 CF/CM42C 1000 30.0 21.8 13.75 11.50
YCD30B21(H,S) MVC08BN21 17.5 CF42B 825 29.4 20.2 14.00 11.75
YCD30B21(H,S) MVC12BN21 17.5 CF/CM30B 850 29.2 20.0 13.75 11.75
YCD30B21(H,S) MVC12BN21 17.5 CF/CM36B 1000 30.0 22.0 13.75 11.75
YCD30B21(H,S) MVC12BN21 17.5 CF42B 975 30.0 21.8 14.00 11.75
YCD30B21(H,S) MVC14DN21 24.5 CF/CM30D 925 30.0 21.4 14.25 12.25
YCD30B21(H,S) MVC14DN21 24.5 CF/CM36D 975 30.0 21.8 14.50 12.50
YCD30B21(H,S) MVC14DN21 24.5 CF/CM42D 1000 30.0 21.8 14.75 12.25
YCD30B21(H,S) MVC16CN21 21.0 CF/CM30C 925 30.0 21.4 14.25 12.00
YCD30B21(H,S) MVC16CN21 21.0 CF/CM36C 1025 30.0 22.2 14.50 12.25
YCD30B21(H,S) MVC16CN21 21.0 CF/CM42C 900 30.0 21.2 14.50 12.25
YCD30B21(H,S) MVC20DN21 24.5 CF/CM36D 1120 30.0 23.0 14.50 12.50
YCD30B21(H,S) MVC20DN21 24.5 CF/CM42D 1100 30.0 22.6 14.25 12.25
YCD36B21(H,S) AE36BX21 17.5 – 1000 35.2 23.8 14.00 11.75
YCD36B21(H,S) AE36CX21 21.0 – 1000 35.2 24.0 14.25 12.25
YCD36B21(H,S) AE42CX21 21.0 – 1200 36.0 26.2 14.00 12.00
YCD36B21(H,S) AE48CX21 21.0 – 1225 36.0 26.4 14.00 12.00
YCD36B21(H,S) AE48DX21 24.5 – 1225 36.0 26.4 14.25 12.25
YCD36B21(H,S) AP36BX21 17.5 – 1000 34.6 23.4 13.00 11.00
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5495504-YTG-B-0518
Johnson Controls Unitary Products 7
YCD36B21(H,S) AP36CX21 21.0 – 1125 35.0 24.8 13.00 11.00
YCD36B21(H,S) AP42CX21 21.0 – 1125 35.0 24.8 13.00 11.00
YCD36B21(H,S) AP48CX21 21.0 – 1200 35.2 25.4 13.00 11.00
YCD36B21(H,S) AP48DX21 24.5 – 1200 35.2 25.4 13.00 11.00
YCD36B21(H,S) AVC36BX21 17.5 – 975 35.2 23.6 14.00 12.00
YCD36B21(H,S) AVC36CX21 21.0 – 1125 35.8 25.8 14.25 12.25
YCD36B21(H,S) AVC42CX21 21.0 – 1100 35.8 25.6 14.25 12.25
YCD36B21(H,S) AVC48CX21 21.0 – 1075 35.6 24.8 14.25 12.25
YCD36B21(H,S) AVC48DX21 24.5 – 1150 36.0 25.6 14.25 12.25
YCD36B21(H,S) ME12BN21 17.5 CF/CM36B 1025 35.2 24.2 13.75 11.75
YCD36B21(H,S) ME12BN21 17.5 CF42B 975 35.2 23.8 14.00 11.75
YCD36B21(H,S) ME14DN21 24.5 CF/CM36D 1250 36.0 26.6 14.25 12.25
YCD36B21(H,S) ME14DN21 24.5 CF/CM42D 1225 36.0 26.6 14.25 12.25
YCD36B21(H,S) ME14DN21 24.5 CF/CM48D 1200 36.0 26.2 14.25 12.25
YCD36B21(H,S) ME16CN21 21.0 CF/CM36C 1225 35.8 26.4 14.00 12.00
YCD36B21(H,S) ME16CN21 21.0 CF/CM42C 1225 36.0 26.4 14.25 12.25
YCD36B21(H,S) ME16CN21 21.0 CF/CM48C 1225 36.0 26.2 14.25 12.25
YCD36B21(H,S) ME20DN21 24.5 CF/CM36D 1325 35.6 27.0 13.50 11.50
YCD36B21(H,S) ME20DN21 24.5 CF/CM42D 1325 35.8 27.2 13.50 11.50
YCD36B21(H,S) ME20DN21 24.5 CF/CM48D 1325 35.8 27.2 13.50 11.50
YCD36B21(H,S) MVC08BN21 17.5 CF42B 975 35.0 23.8 13.75 11.75
YCD36B21(H,S) MVC12BN21 17.5 CF/CM36B 1000 35.0 23.4 13.50 11.50
YCD36B21(H,S) MVC12BN21 17.5 CF42B 975 35.2 23.8 13.75 11.75
YCD36B21(H,S) MVC14DN21 24.5 CF/CM36D 975 35.2 23.6 14.25 12.25
YCD36B21(H,S) MVC14DN21 24.5 CF/CM42D 1000 35.4 24.0 14.25 12.25
YCD36B21(H,S) MVC14DN21 24.5 CF/CM48D 1150 35.8 25.8 14.25 12.25
YCD36B21(H,S) MVC16CN21 21.0 CF/CM36C 1100 35.6 25.0 14.25 12.25
YCD36B21(H,S) MVC16CN21 21.0 CF/CM42C 1250 36.0 26.8 14.25 12.25
YCD36B21(H,S) MVC16CN21 21.0 CF/CM48C 1200 36.0 26.2 14.25 12.25
YCD36B21(H,S) MVC20DN21 24.5 CF/CM36D 1120 35.8 25.4 14.25 12.25
YCD36B21(H,S) MVC20DN21 24.5 CF/CM42D 1200 35.8 26.2 14.00 11.75
YCD36B21(H,S) MVC20DN21 24.5 CF/CM48D 1200 36.0 26.2 14.25 12.25
YCD42B21(H,S) AE42CX21 21.0 – 1375 42.0 31.0 13.75 11.75
YCD42B21(H,S) AE48CX21 21.0 – 1225 41.0 29.0 14.00 12.00
YCD42B21(H,S) AE48DX21 24.5 – 1225 41.0 29.0 14.00 12.00
YCD42B21(H,S) AE60CX21 21.0 – 1425 42.0 31.5 14.00 12.00
YCD42B21(H,S) AE60DX21 24.5 – 1400 42.0 31.0 14.25 12.25
YCD42B21(H,S) AP42CX21 21.0 – 1225 40.0 28.0 13.00 11.00
YCD42B21(H,S) AP48CX21 21.0 – 1300 42.0 30.0 13.00 11.00
YCD42B21(H,S) AP48DX21 24.5 – 1325 42.0 30.0 13.00 11.25
YCD42B21(H,S) AP60CX21 21.0 – 1350 42.0 30.5 13.00 11.00
YCD42B21(H,S) AP60DX21 24.5 – 1475 42.0 31.5 13.00 11.00
YCD42B21(H,S) AVC42CX21 21.0 – 1275 42.0 30.0 13.50 11.50
YCD42B21(H,S) AVC48CX21 21.0 – 1225 42.0 30.0 13.75 11.75
YCD42B21(H,S) AVC48DX21 24.5 – 1300 42.0 30.0 14.25 12.00
YCD42B21(H,S) AVC60CX21 21.0 – 1350 42.0 30.5 14.00 12.00
YCD42B21(H,S) AVC60DX21 24.5 – 1200 42.0 29.5 14.25 12.25
YCD42B21(H,S) ME14DN21 24.5 CF/CM42D 1400 42.0 31.0 14.00 12.00
YCD42B21(H,S) ME14DN21 24.5 CF/CM48D 1400 42.0 31.0 14.00 12.00
YCD42B21(H,S) ME14DN21 24.5 CF/CM60D 1225 42.0 29.5 14.25 12.25
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5495504-YTG-B-0518
8 Johnson Controls Unitary Products
YCD42B21(H,S) ME14DN21 24.5 CF/CM64D 1375 42.0 31.0 14.25 12.25
YCD42B21(H,S) ME16CN21 21.0 CF/CM42C 1400 42.0 31.5 13.75 11.75
YCD42B21(H,S) ME16CN21 21.0 CF/CM48C 1225 42.0 29.5 14.00 12.00
YCD42B21(H,S) ME16CN21 21.0 CF/CM60C 1225 42.0 30.0 14.00 12.00
YCD42B21(H,S) ME20DN21 24.5 CF/CM42D 1450 42.0 31.5 13.75 11.75
YCD42B21(H,S) ME20DN21 24.5 CF/CM48D 1475 42.0 31.5 14.00 12.00
YCD42B21(H,S) ME20DN21 24.5 CF/CM60D 1400 42.0 31.0 13.75 11.75
YCD42B21(H,S) ME20DN21 24.5 CF/CM64D 1400 42.0 31.0 14.25 12.25
YCD42B21(H,S) MVC12BN21 17.5 CF42B 1175 41.0 28.5 13.00 11.25
YCD42B21(H,S) MVC14DN21 24.5 CF/CM42D 1375 42.0 31.0 13.75 11.75
YCD42B21(H,S) MVC14DN21 24.5 CF/CM48D 1325 42.0 30.5 14.00 12.00
YCD42B21(H,S) MVC14DN21 24.5 CF/CM60D 1350 42.0 30.5 14.00 12.00
YCD42B21(H,S) MVC14DN21 24.5 CF/CM64D 1325 42.0 30.5 14.25 12.00
YCD42B21(H,S) MVC16CN21 21.0 CF/CM42C 1250 42.0 30.5 14.00 12.00
YCD42B21(H,S) MVC16CN21 21.0 CF/CM48C 1275 42.0 30.0 13.75 11.75
YCD42B21(H,S) MVC20DN21 24.5 CF/CM42D 1225 42.0 30.0 13.75 11.75
YCD42B21(H,S) MVC20DN21 24.5 CF/CM48D 1300 42.0 30.0 14.00 12.00
YCD42B21(H,S) MVC20DN21 24.5 CF/CM60D 1250 42.0 30.0 14.25 12.25
YCD42B21(H,S) MVC20DN21 24.5 CF/CM64D 1250 42.0 30.0 14.25 12.00
YCD48B21S AE48CX21 21.0 – 1425 47.5 35.0 14.25 12.25
YCD48B21S AE48DX21 24.5 – 1425 48.0 35.5 14.50 12.25
YCD48B21S AE60CX21 21.0 – 1425 48.0 35.5 14.50 12.25
YCD48B21S AE60DX21 24.5 – 1400 48.0 35.0 14.75 12.25
YCD48B21S AP48CX21 21.0 – 1300 46.0 32.5 13.25 11.50
YCD48B21S AP48DX21 24.5 – 1475 47.5 35.0 13.00 11.00
YCD48B21S AP60CX21 21.0 – 1500 48.0 35.5 13.00 11.25
YCD48B21S AP60DX21 24.5 – 1475 47.5 35.0 13.25 11.25
YCD48B21S AVC48CX21 21.0 – 1350 47.5 34.5 14.25 12.00
YCD48B21S AVC48DX21 24.5 – 1400 48.0 35.0 14.50 12.25
YCD48B21S AVC60CX21 21.0 – 1350 48.0 34.5 14.25 12.25
YCD48B21S AVC60DX21 24.5 – 1475 48.0 35.5 14.50 12.25
YCD48B21S ME14DN21 24.5 CF/CM60D 1425 48.0 35.0 14.50 12.25
YCD48B21S ME14DN21 24.5 CF/CM64D 1375 48.0 34.5 14.75 12.25
YCD48B21S ME16CN21 21.0 CF/CM48C 1475 48.0 35.5 14.50 12.25
YCD48B21S ME16CN21 21.0 CF/CM60C 1450 48.0 35.5 14.50 12.25
YCD48B21S ME20DN21 24.5 CF/CM48D 1475 48.0 35.5 14.50 12.25
YCD48B21S ME20DN21 24.5 CF/CM60D 1425 48.0 35.0 14.50 12.25
YCD48B21S ME20DN21 24.5 CF/CM64D 1425 48.0 35.5 14.75 12.25
YCD48B21S MVC14DN21 24.5 CF/CM48D 1325 47.5 33.5 14.50 12.25
YCD48B21S MVC14DN21 24.5 CF/CM60D 1350 47.5 34.0 14.25 12.25
YCD48B21S MVC14DN21 24.5 CF/CM64D 1325 48.0 34.0 14.75 12.25
YCD48B21S MVC16CN21 21.0 CF/CM48C 1425 48.0 35.0 14.25 12.25
YCD48B21S MVC16CN21 21.0 CF/CM60C 1650 48.0 37.0 15.00 12.50
YCD48B21S MVC20DN21 24.5 CF/CM48D 1450 48.0 35.5 14.25 12.00
YCD48B21S MVC20DN21 24.5 CF/CM60D 1475 48.0 35.5 14.50 12.25
YCD48B21S MVC20DN21 24.5 CF/CM64D 1375 48.0 34.5 14.75 12.25
YCD60B21S AE60CX21 21.0 – 1625 56.0 40.0 13.25 11.25
YCD60B21S AE60DX21 24.5 – 1775 57.0 41.5 13.25 11.25
YCD60B21S AP60CX21 21.0 – 1525 54.5 38.0 13.00 10.75
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5495504-YTG-B-0518
Johnson Controls Unitary Products 9
— = Not applicable.
MP Modular Air Handlers use Coil Only Ratings.
YCD60B21S AP60DX21 24.5 – 1550 55.0 38.5 13.00 10.75
YCD60B21S AVC60CX21 21.0 – 1750 56.0 41.0 13.00 11.25
YCD60B21S AVC60DX21 24.5 – 1650 56.5 40.5 13.50 11.25
YCD60B21S ME16CN21 21.0 CF/CM60C 1625 56.0 40.0 13.50 11.25
YCD60B21S ME20DN21 24.5 CF/CM60D 1650 56.0 40.0 13.50 11.25
YCD60B21S ME20DN21 24.5 CF/CM64D 1625 56.5 40.5 13.50 11.50
YCD60B21S MVC16CN21 21.0 CF/CM60C 1650 56.5 40.5 14.25 12.00
YCD60B21S MVC20DN21 24.5 CF/CM60D 1700 56.0 40.0 13.50 11.25
YCD60B21S MVC20DN21 24.5 CF/CM64D 1700 56.5 40.0 13.50 11.25
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
Cooling MBH based on 80°F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total
electric power input in watt-hours during the same period.
1. CM coils available with a factory installed horizontal drain pan. See price pages for specific model number.
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT MODEL
COIL CFM RANGE
(MIN.-MAX.)
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER 1EER
TOTAL SENS.
YCD18B21(H,S) CF/CM/CU18A 14.5 450 - 750 600 17.5 13.3 13.00 11.00
YCD18B21(H,S) CF/CM/CU18B 17.5 450 - 750 600 17.5 13.3 13.00 11.00
YCD18B21(H,S) CF/CM/CU24A 14.5 450 - 750 600 18.0 13.8 13.00 11.00
YCD18B21(H,S) CF/CM/CU24B 17.5 450 - 750 600 18.0 13.8 13.00 11.00
YCD18B21(H,S) CF/CM/CU24C 21.0 450 - 750 600 18.0 13.8 13.00 11.00
YCD18B21(H,S) CF/CM/CU30A 14.5 450 - 750 600 18.0 13.9 13.00 11.25
YCD18B21(H,S) CF/CM/CU30B 17.5 450 - 750 600 18.0 13.9 13.00 11.25
YCD18B21(H,S) CF/CM/CU30C 21.0 450 - 750 600 18.0 13.9 13.00 11.25
YCD18B21(H,S) CF/CM/CU30D 24.5 450 - 750 600 18.0 13.9 13.00 11.25
YCD18B21(H,S) CF/CM/CU36B 17.5 450 - 750 600 18.0 13.6 13.00 11.25
YCD18B21(H,S) CF/CM/CU36C 21.0 450 - 750 600 18.0 13.6 13.00 11.25
YCD18B21(H,S) CF/CM/CU36D 24.5 450 - 750 600 18.0 13.6 13.00 11.25
YCD18B21(H,S) CF/CM36A 14.5 450 - 750 600 18.0 13.6 13.00 11.25
YCD24B21(H,S) CF/CM/CU24A 14.5 600 - 1000 800 23.6 17.4 13.00 11.00
YCD24B21(H,S) CF/CM/CU24B 17.5 600 - 1000 800 23.6 17.4 13.00 11.00
YCD24B21(H,S) CF/CM/CU24C 21.0 600 - 1000 800 23.6 17.4 13.00 11.00
YCD24B21(H,S) CF/CM/CU30A 14.5 600 - 1000 800 24.0 17.8 13.00 11.00
YCD24B21(H,S) CF/CM/CU30B 17.5 600 - 1000 800 24.0 17.8 13.00 11.00
YCD24B21(H,S) CF/CM/CU30C 21.0 600 - 1000 800 24.0 17.8 13.00 11.00
YCD24B21(H,S) CF/CM/CU30D 24.5 600 - 1000 800 24.0 17.8 13.00 11.00
YCD24B21(H,S) CF/CM/CU36B 17.5 600 - 1000 800 24.0 17.4 13.00 11.00
YCD24B21(H,S) CF/CM/CU36C 21.0 600 - 1000 800 24.0 17.4 13.00 11.00
YCD24B21(H,S) CF/CM/CU36D 24.5 600 - 1000 800 24.0 17.4 13.00 11.00
YCD24B21(H,S) CF/CM/CU42C 21.0 600 - 1000 800 24.0 17.6 13.00 11.25
YCD24B21(H,S) CF/CM/CU42D 24.5 600 - 1000 800 24.0 17.6 13.00 11.25
YCD24B21(H,S) CF/CM36A 14.5 600 - 1000 800 24.0 17.4 13.00 11.00
YCD24B21(H,S) CF42B 17.5 600 - 1000 800 24.0 17.6 13.00 11.25
YCD30B21(H,S) CF/CM/CU30B 17.5 800 - 1200 1000 29.0 21.2 13.00 11.00
YCD30B21(H,S) CF/CM/CU30C 21.0 800 - 1200 1000 29.0 21.2 13.00 11.00
YCD30B21(H,S) CF/CM/CU30D 24.5 800 - 1200 1000 29.0 21.2 13.00 11.00

5495504-YTG-B-0518
10 Johnson Controls Unitary Products
— = Not Applicable.
MP Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
YCD30B21(H,S) CF/CM/CU36B 17.5 800 - 1200 1000 29.8 21.8 13.00 11.00
YCD30B21(H,S) CF/CM/CU36C 21.0 800 - 1200 1000 29.8 21.8 13.00 11.00
YCD30B21(H,S) CF/CM/CU36D 24.5 800 - 1200 1000 29.8 21.8 13.00 11.00
YCD30B21(H,S) CF/CM/CU42C 21.0 800 - 1200 1000 29.8 21.6 13.00 11.00
YCD30B21(H,S) CF/CM/CU42D 24.5 800 - 1200 1000 29.8 21.6 13.00 11.00
YCD30B21(H,S) CF42B 17.5 800 - 1200 1000 29.8 21.6 13.00 11.00
YCD36B21(H,S) CF/CM/CU36B 17.5 1000 - 1400 1200 34.4 25.0 13.00 11.00
YCD36B21(H,S) CF/CM/CU36C 21.0 1000 - 1400 1200 34.4 25.0 13.00 11.00
YCD36B21(H,S) CF/CM/CU36D 24.5 1000 - 1400 1200 34.4 25.0 13.00 11.00
YCD36B21(H,S) CF/CM/CU42C 21.0 1000 - 1400 1200 35.2 25.6 13.00 11.00
YCD36B21(H,S) CF/CM/CU42D 24.5 1000 - 1400 1200 35.2 25.6 13.00 11.00
YCD36B21(H,S) CF/CM/CU48C 21.0 1000 - 1400 1200 35.2 25.4 13.00 11.00
YCD36B21(H,S) CF/CM/CU48D 24.5 1000 - 1400 1200 35.2 25.4 13.00 11.00
YCD36B21(H,S) CF42B 17.5 1000 - 1400 1200 35.2 25.6 13.00 11.00
YCD42B21(H,S) CF/CM/CU42C 21.0 1200 - 1600 1400 41.0 30.5 13.00 11.00
YCD42B21(H,S) CF/CM/CU42D 24.5 1200 - 1600 1400 41.0 30.5 13.00 11.00
YCD42B21(H,S) CF/CM/CU48C 21.0 1200 - 1600 1400 42.0 31.0 13.00 11.00
YCD42B21(H,S) CF/CM/CU48D 24.5 1200 - 1600 1400 42.0 31.0 13.00 11.00
YCD42B21(H,S) CF/CM/CU60C 21.0 1200 - 1600 1400 42.0 31.0 13.00 11.00
YCD42B21(H,S) CF/CM/CU60D 24.5 1200 - 1600 1400 42.0 31.0 13.00 11.00
YCD42B21(H,S) CF/CM64D 24.5 1200 - 1600 1400 42.0 31.0 13.00 11.25
YCD42B21(H,S) CF42B 17.5 1200 - 1600 1225 40.0 28.0 13.00 11.00
YCD48B21S CF/CM/CU48C 21.0 1400 - 1800 1600 46.0 33.5 13.00 11.00
YCD48B21S CF/CM/CU48D 24.5 1400 - 1800 1600 46.0 33.5 13.00 11.00
YCD48B21S CF/CM/CU60C 21.0 1400 - 1800 1600 48.0 36.0 13.00 11.25
YCD48B21S CF/CM/CU60D 24.5 1400 - 1800 1600 48.0 36.0 13.00 11.25
YCD48B21S CF/CM64D 24.5 1400 - 1800 1600 48.0 36.0 13.00 11.25
YCD60B21S CF/CM/CU60C 21.0 1520 - 1920 1720 55.0 40.0 13.00 11.00
YCD60B21S CF/CM/CU60D 24.5 1520 - 1920 1725 55.0 40.0 13.00 11.00
YCD60B21S CF/CM64D 24.5 1520 - 1920 1725 56.5 41.0 13.00 11.00
For rated condition information, see the footnotes below the System Capacity - Single Piece and Modular Air Handlers table.
1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings) (Continued)
UNIT MODEL
COIL CFM RANGE
(MIN.-MAX.)
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER 1EER
TOTAL SENS.

5495504-YTG-B-0518
Johnson Controls Unitary Products 11
COOLING CAPACITY - With High Efficiency Motor Furnaces1
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
YCD18B21(H,S) TM8V060A12MP12C 14.5 CF/CM/CU18A 625 18.0 14.3 14.50 12.50
YCD18B21(H,S) TM8V060A12MP12C 14.5 CF/CM/CU24A 625 18.0 14.4 14.75 12.50
YCD18B21(H,S) TM8V060A12MP12C 14.5 CF/CM/CU30A 575 18.0 13.9 14.50 12.75
YCD18B21(H,S) TM8V060A12MP12C 14.5 CF/CM36A 625 18.0 14.2 14.50 12.75
YCD18B21(H,S) TM8V080B12MP12C 17.5 CF/CM/CU18B 625 18.0 14.4 14.75 12.25
YCD18B21(H,S) TM8V080B12MP12C 17.5 CF/CM/CU24B 625 18.0 14.3 15.00 12.50
YCD18B21(H,S) TM8V080B12MP12C 17.5 CF/CM/CU30B 625 18.0 14.4 14.50 12.50
YCD18B21(H,S) TM8V080B12MP12C 17.5 CF/CM/CU36B 625 18.0 14.2 14.75 12.50
YCD18B21(H,S) TM8X060A12MP11 14.5 CF/CM/CU18A 625 18.0 14.4 14.50 12.50
YCD18B21(H,S) TM8X060A12MP11 14.5 CF/CM/CU24A 625 18.0 14.4 15.00 12.75
YCD18B21(H,S) TM8X060A12MP11 14.5 CF/CM/CU30A 625 18.0 14.4 14.50 12.50
YCD18B21(H,S) TM8X060A12MP11 14.5 CF/CM36A 625 18.0 14.2 14.75 12.75
YCD18B21(H,S) TM8X080B12MP11 17.5 CF/CM/CU18B 675 18.0 14.8 14.50 12.50
YCD18B21(H,S) TM8X080B12MP11 17.5 CF/CM/CU24B 675 18.0 14.8 14.75 12.75
YCD18B21(H,S) TM8X080B12MP11 17.5 CF/CM/CU30B 675 18.0 14.8 14.50 12.75
YCD18B21(H,S) TM8X080B12MP11 17.5 CF/CM/CU36B 675 18.0 14.8 14.75 12.75
YCD18B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU24C 700 18.0 15.1 14.75 12.50
YCD18B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU30C 700 18.0 14.8 14.75 12.75
YCD18B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU36C 700 18.0 15.0 14.75 12.75
YCD18B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU24C 700 18.0 15.1 14.75 12.50
YCD18B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU30C 700 18.0 14.8 14.75 12.75
YCD18B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU36C 700 18.0 15.0 14.75 12.75
YCD18B21(H,S) TM8Y060A12MP11 14.5 CF/CM/CU18A 625 18.0 14.4 14.50 12.50
YCD18B21(H,S) TM8Y060A12MP11 14.5 CF/CM/CU24A 625 18.0 14.4 15.00 12.75
YCD18B21(H,S) TM8Y060A12MP11 14.5 CF/CM/CU30A 625 18.0 14.4 14.50 12.50
YCD18B21(H,S) TM8Y060A12MP11 14.5 CF/CM36A 625 18.0 14.2 14.75 12.75
YCD18B21(H,S) TM8Y080B12MP11 17.5 CF/CM/CU18B 675 18.0 14.8 14.50 12.50
YCD18B21(H,S) TM8Y080B12MP11 17.5 CF/CM/CU24B 675 18.0 14.8 14.75 12.75
YCD18B21(H,S) TM8Y080B12MP11 17.5 CF/CM/CU30B 675 18.0 14.8 14.50 12.75
YCD18B21(H,S) TM8Y080B12MP11 17.5 CF/CM/CU36B 675 18.0 14.8 14.75 12.75
YCD18B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU24C 700 18.0 15.1 14.75 12.50
YCD18B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU30C 700 18.0 14.8 14.75 12.75
YCD18B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU36C 700 18.0 15.0 14.75 12.75
YCD18B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU24C 700 18.0 15.1 14.75 12.50
YCD18B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU30C 700 18.0 14.8 14.75 12.75
YCD18B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU36C 700 18.0 15.0 14.75 12.75
YCD18B21(H,S) TM9E040A10MP11 14.5 CF/CM/CU18A 675 18.0 14.8 13.75 12.25
YCD18B21(H,S) TM9E040A10MP11 14.5 CF/CM/CU24A 500 17.3 12.7 14.00 12.25
YCD18B21(H,S) TM9E040A10MP11 14.5 CF/CM/CU30A 500 17.5 12.9 13.75 12.50
YCD18B21(H,S) TM9E040A10MP11 14.5 CF/CM36A 675 18.0 14.8 13.75 12.50
YCD18B21(H,S) TM9E080B12MP11 17.5 CF/CM/CU18B 700 18.0 15.1 14.50 12.50
YCD18B21(H,S) TM9E080B12MP11 17.5 CF/CM/CU24B 700 18.0 15.1 14.50 12.50
YCD18B21(H,S) TM9E080B12MP11 17.5 CF/CM/CU30B 700 18.0 14.8 14.25 12.75
YCD18B21(H,S) TM9E080B12MP11 17.5 CF/CM/CU36B 700 18.0 15.0 14.75 12.75
YCD18B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU24C 625 18.0 14.3 15.00 12.75
YCD18B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU30C 625 18.0 14.4 14.75 12.75
YCD18B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU30D 650 18.0 14.5 14.75 12.75
YCD18B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU36C 650 18.0 14.5 15.00 12.75
YCD18B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU36D 650 18.0 14.5 15.00 12.75
YCD18B21(H,S) TM9V080B12MP12C 17.5 CF/CM/CU18B 625 18.0 14.3 14.50 12.50
YCD18B21(H,S) TM9V080B12MP12C 17.5 CF/CM/CU24B 625 18.0 14.3 15.00 12.50
YCD18B21(H,S) TM9V080B12MP12C 17.5 CF/CM/CU30B 575 18.0 13.9 14.75 12.50
YCD18B21(H,S) TM9V080B12MP12C 17.5 CF/CM/CU36B 625 18.0 14.3 14.75 12.75

5495504-YTG-B-0518
12 Johnson Controls Unitary Products
YCD18B21(H,S) TM9Y040A10MP11 14.5 CF/CM/CU18A 675 18.0 14.8 13.75 12.25
YCD18B21(H,S) TM9Y040A10MP11 14.5 CF/CM/CU24A 500 17.3 12.7 14.00 12.25
YCD18B21(H,S) TM9Y040A10MP11 14.5 CF/CM/CU30A 500 17.5 12.9 13.75 12.50
YCD18B21(H,S) TM9Y040A10MP11 14.5 CF/CM36A 675 18.0 14.8 13.75 12.50
YCD18B21(H,S) TM9Y080B12MP11 17.5 CF/CM/CU18B 700 18.0 15.1 14.50 12.50
YCD18B21(H,S) TM9Y080B12MP11 17.5 CF/CM/CU24B 700 18.0 15.1 14.50 12.50
YCD18B21(H,S) TM9Y080B12MP11 17.5 CF/CM/CU30B 700 18.0 14.8 14.25 12.75
YCD18B21(H,S) TM9Y080B12MP11 17.5 CF/CM/CU36B 700 18.0 15.0 14.75 12.75
YCD18B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU24C 625 18.0 14.3 15.00 12.75
YCD18B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU30C 625 18.0 14.4 14.75 12.75
YCD18B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU30D 650 18.0 14.5 14.75 12.75
YCD18B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU36C 650 18.0 14.5 15.00 12.75
YCD18B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU36D 650 18.0 14.5 15.00 12.75
YCD18B21(H,S) TMLV060A12MP12C 14.5 CF/CM/CU18A 625 18.0 14.3 14.50 12.50
YCD18B21(H,S) TMLV060A12MP12C 14.5 CF/CM/CU24A 625 18.0 14.4 14.75 12.50
YCD18B21(H,S) TMLV060A12MP12C 14.5 CF/CM/CU30A 575 18.0 13.9 14.50 12.75
YCD18B21(H,S) TMLV060A12MP12C 14.5 CF/CM36A 625 18.0 14.2 14.50 12.75
YCD18B21(H,S) TMLV080B12MP12C 17.5 CF/CM/CU18B 625 18.0 14.4 14.75 12.25
YCD18B21(H,S) TMLV080B12MP12C 17.5 CF/CM/CU24B 625 18.0 14.3 15.00 12.50
YCD18B21(H,S) TMLV080B12MP12C 17.5 CF/CM/CU30B 625 18.0 14.4 14.50 12.50
YCD18B21(H,S) TMLV080B12MP12C 17.5 CF/CM/CU36B 625 18.0 14.2 14.75 12.50
YCD18B21(H,S) TMLX060A12MP11 14.5 CF/CM/CU18A 625 18.0 14.4 14.50 12.50
YCD18B21(H,S) TMLX060A12MP11 14.5 CF/CM/CU24A 625 18.0 14.4 15.00 12.75
YCD18B21(H,S) TMLX060A12MP11 14.5 CF/CM/CU30A 625 18.0 14.4 14.50 12.50
YCD18B21(H,S) TMLX060A12MP11 14.5 CF/CM36A 625 18.0 14.2 14.75 12.75
YCD18B21(H,S) TMLX080B12MP11 17.5 CF/CM/CU18B 675 18.0 14.8 14.50 12.50
YCD18B21(H,S) TMLX080B12MP11 17.5 CF/CM/CU24B 675 18.0 14.8 14.75 12.75
YCD18B21(H,S) TMLX080B12MP11 17.5 CF/CM/CU30B 675 18.0 14.8 14.50 12.75
YCD18B21(H,S) TMLX080B12MP11 17.5 CF/CM/CU36B 675 18.0 14.8 14.75 12.75
YCD18B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU24C 700 18.0 15.1 14.75 12.50
YCD18B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU30C 700 18.0 14.8 14.75 12.75
YCD18B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU36C 700 18.0 15.0 14.75 12.75
YCD18B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU24C 700 18.0 15.1 14.75 12.50
YCD18B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU30C 700 18.0 14.8 14.75 12.75
YCD18B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU36C 700 18.0 15.0 14.75 12.75
YCD18B21(H,S) TP9C080B12MP13C 17.5 CF/CM/CU18B 625 18.0 14.3 14.50 12.50
YCD18B21(H,S) TP9C080B12MP13C 17.5 CF/CM/CU24B 625 18.0 14.3 15.00 12.50
YCD18B21(H,S) TP9C080B12MP13C 17.5 CF/CM/CU30B 575 18.0 13.9 14.75 12.50
YCD18B21(H,S) TP9C080B12MP13C 17.5 CF/CM/CU36B 625 18.0 14.3 14.75 12.75
YCD18B21(H,S) TPLC060A12MP13C 14.5 CF/CM/CU18A 625 18.0 14.3 14.50 12.50
YCD18B21(H,S) TPLC060A12MP13C 14.5 CF/CM/CU24A 625 18.0 14.4 14.75 12.50
YCD18B21(H,S) TPLC060A12MP13C 14.5 CF/CM/CU30A 575 18.0 13.9 14.50 12.75
YCD18B21(H,S) TPLC060A12MP13C 14.5 CF/CM36A 625 18.0 14.2 14.50 12.75
YCD18B21(H,S) TPLC080B12MP13C 17.5 CF/CM/CU18B 625 18.0 14.4 14.75 12.25
YCD18B21(H,S) TPLC080B12MP13C 17.5 CF/CM/CU24B 625 18.0 14.3 15.00 12.50
YCD18B21(H,S) TPLC080B12MP13C 17.5 CF/CM/CU30B 625 18.0 14.4 14.50 12.50
YCD18B21(H,S) TPLC080B12MP13C 17.5 CF/CM/CU36B 625 18.0 14.2 14.75 12.50
YCD18B21(H,S) YP9C080B12MP13C 17.5 CF/CM/CU18B 625 18.0 14.3 14.50 12.50
YCD18B21(H,S) YP9C080B12MP13C 17.5 CF/CM/CU24B 625 18.0 14.3 15.00 12.50
YCD18B21(H,S) YP9C080B12MP13C 17.5 CF/CM/CU30B 575 18.0 13.9 14.75 12.50
YCD18B21(H,S) YP9C080B12MP13C 17.5 CF/CM/CU36B 625 18.0 14.3 14.75 12.75
YCD18B21(H,S) YPLC060A12MP13C 14.5 CF/CM/CU18A 625 18.0 14.3 14.50 12.50
YCD18B21(H,S) YPLC060A12MP13C 14.5 CF/CM/CU24A 625 18.0 14.4 14.75 12.50
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5495504-YTG-B-0518
Johnson Controls Unitary Products 13
YCD18B21(H,S) YPLC060A12MP13C 14.5 CF/CM/CU30A 575 18.0 13.9 14.50 12.75
YCD18B21(H,S) YPLC060A12MP13C 14.5 CF/CM36A 625 18.0 14.2 14.50 12.75
YCD18B21(H,S) YPLC080B12MP13C 17.5 CF/CM/CU18B 625 18.0 14.4 14.75 12.25
YCD18B21(H,S) YPLC080B12MP13C 17.5 CF/CM/CU24B 625 18.0 14.3 15.00 12.50
YCD18B21(H,S) YPLC080B12MP13C 17.5 CF/CM/CU30B 625 18.0 14.4 14.50 12.50
YCD18B21(H,S) YPLC080B12MP13C 17.5 CF/CM/CU36B 625 18.0 14.2 14.75 12.50
YCD24B21(H,S) TM8V060A12MP12C 14.5 CF/CM/CU24A 800 24.0 18.8 13.75 11.50
YCD24B21(H,S) TM8V060A12MP12C 14.5 CF/CM/CU30A 800 24.0 18.8 13.75 11.75
YCD24B21(H,S) TM8V060A12MP12C 14.5 CF/CM36A 800 24.0 18.6 13.75 12.00
YCD24B21(H,S) TM8V080B12MP12C 17.5 CF/CM/CU24B 825 24.0 19.1 14.00 11.75
YCD24B21(H,S) TM8V080B12MP12C 17.5 CF/CM/CU30B 825 24.0 19.0 14.00 11.75
YCD24B21(H,S) TM8V080B12MP12C 17.5 CF/CM/CU36B 825 24.0 18.9 14.00 11.75
YCD24B21(H,S) TM8V080B12MP12C 17.5 CF42B 825 24.0 19.0 14.25 12.00
YCD24B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU30C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU30D 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU36C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU36D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU42C 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU42D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU30C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU30D 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU36C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU36D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU42C 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU42D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TM8X060A12MP11 14.5 CF/CM/CU24A 750 23.8 18.2 14.00 11.75
YCD24B21(H,S) TM8X060A12MP11 14.5 CF/CM/CU30A 750 24.0 18.5 14.00 12.00
YCD24B21(H,S) TM8X060A12MP11 14.5 CF/CM36A 775 24.0 18.4 14.25 12.25
YCD24B21(H,S) TM8X080B12MP11 17.5 CF/CM/CU24B 775 24.0 18.6 14.25 12.00
YCD24B21(H,S) TM8X080B12MP11 17.5 CF/CM/CU30B 775 24.0 18.7 14.50 12.25
YCD24B21(H,S) TM8X080B12MP11 17.5 CF/CM/CU36B 775 24.0 18.4 14.50 12.25
YCD24B21(H,S) TM8X080B12MP11 17.5 CF42B 825 24.0 19.1 14.75 12.25
YCD24B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU24C 700 23.4 17.4 14.25 12.25
YCD24B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU30C 700 24.0 17.8 14.25 12.25
YCD24B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU30D 725 24.0 18.2 14.50 12.25
YCD24B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU36C 700 24.0 17.7 14.25 12.25
YCD24B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU36D 725 24.0 17.9 14.50 12.25
YCD24B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU42C 700 24.0 17.8 14.50 12.50
YCD24B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU42D 725 24.0 18.2 14.50 12.50
YCD24B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU24C 700 23.4 17.4 14.25 12.25
YCD24B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU30C 700 24.0 17.8 14.25 12.25
YCD24B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU30D 725 24.0 18.2 14.50 12.25
YCD24B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU36C 700 24.0 17.7 14.25 12.25
YCD24B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU36D 725 24.0 17.9 14.50 12.25
YCD24B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU42C 700 24.0 17.8 14.50 12.50
YCD24B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU42D 725 24.0 18.2 14.50 12.50
YCD24B21(H,S) TM8Y060A12MP11 14.5 CF/CM/CU24A 750 23.8 18.2 14.00 11.75
YCD24B21(H,S) TM8Y060A12MP11 14.5 CF/CM/CU30A 750 24.0 18.5 14.00 12.00
YCD24B21(H,S) TM8Y060A12MP11 14.5 CF/CM36A 775 24.0 18.4 14.25 12.25
YCD24B21(H,S) TM8Y080B12MP11 17.5 CF/CM/CU24B 775 24.0 18.6 14.25 12.00
YCD24B21(H,S) TM8Y080B12MP11 17.5 CF/CM/CU30B 775 24.0 18.7 14.50 12.25
YCD24B21(H,S) TM8Y080B12MP11 17.5 CF/CM/CU36B 775 24.0 18.4 14.50 12.25
YCD24B21(H,S) TM8Y080B12MP11 17.5 CF42B 825 24.0 19.1 14.75 12.25
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5495504-YTG-B-0518
14 Johnson Controls Unitary Products
YCD24B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU24C 700 23.4 17.4 14.25 12.25
YCD24B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU30C 700 24.0 17.8 14.25 12.25
YCD24B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU30D 725 24.0 18.2 14.50 12.25
YCD24B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU36C 700 24.0 17.7 14.25 12.25
YCD24B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU36D 725 24.0 17.9 14.50 12.25
YCD24B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU42C 700 24.0 17.8 14.50 12.50
YCD24B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU42D 725 24.0 18.2 14.50 12.50
YCD24B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU24C 700 23.4 17.4 14.25 12.25
YCD24B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU30C 700 24.0 17.8 14.25 12.25
YCD24B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU30D 725 24.0 18.2 14.50 12.25
YCD24B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU36C 700 24.0 17.7 14.25 12.25
YCD24B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU36D 725 24.0 17.9 14.50 12.25
YCD24B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU42C 700 24.0 17.8 14.50 12.50
YCD24B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU42D 725 24.0 18.2 14.50 12.50
YCD24B21(H,S) TM9E040A10MP11 14.5 CF/CM/CU24A 775 23.8 18.4 13.25 11.25
YCD24B21(H,S) TM9E040A10MP11 14.5 CF/CM/CU30A 775 24.0 18.7 13.25 11.50
YCD24B21(H,S) TM9E040A10MP11 14.5 CF/CM36A 775 24.0 18.4 13.50 11.75
YCD24B21(H,S) TM9E080B12MP11 17.5 CF/CM/CU24B 700 23.4 17.3 14.00 12.00
YCD24B21(H,S) TM9E080B12MP11 17.5 CF/CM/CU30B 700 23.8 17.8 14.25 12.25
YCD24B21(H,S) TM9E080B12MP11 17.5 CF/CM/CU36B 700 24.0 17.7 14.25 12.25
YCD24B21(H,S) TM9E080B12MP11 17.5 CF42B 875 24.0 19.6 14.25 12.25
YCD24B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU30D 650 23.2 17.0 14.25 12.25
YCD24B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU36C 650 23.4 16.8 14.00 12.25
YCD24B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU36D 650 23.4 16.8 14.00 12.25
YCD24B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU42C 650 23.4 17.0 14.25 12.25
YCD24B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU42D 650 23.4 17.0 14.25 12.25
YCD24B21(H,S) TM9V080B12MP12C 17.5 CF/CM/CU24B 800 24.0 18.8 14.50 12.25
YCD24B21(H,S) TM9V080B12MP12C 17.5 CF/CM/CU30B 800 24.0 18.8 14.00 12.00
YCD24B21(H,S) TM9V080B12MP12C 17.5 CF/CM/CU36B 800 24.0 18.6 14.50 12.25
YCD24B21(H,S) TM9V080B12MP12C 17.5 CF42B 800 24.0 18.7 14.50 12.25
YCD24B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU30C 900 24.0 19.8 14.00 12.25
YCD24B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU30D 900 24.0 19.8 14.25 12.25
YCD24B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU36C 900 24.0 19.7 14.50 12.25
YCD24B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU36D 900 24.0 19.7 14.50 12.25
YCD24B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU42C 900 24.0 19.4 14.25 12.50
YCD24B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU42D 900 24.0 19.4 14.25 12.50
YCD24B21(H,S) TM9Y040A10MP11 14.5 CF/CM/CU24A 775 23.8 18.4 13.25 11.25
YCD24B21(H,S) TM9Y040A10MP11 14.5 CF/CM/CU30A 775 24.0 18.7 13.25 11.50
YCD24B21(H,S) TM9Y040A10MP11 14.5 CF/CM36A 775 24.0 18.4 13.50 11.75
YCD24B21(H,S) TM9Y080B12MP11 17.5 CF/CM/CU24B 700 23.4 17.3 14.00 12.00
YCD24B21(H,S) TM9Y080B12MP11 17.5 CF/CM/CU30B 700 23.8 17.8 14.25 12.25
YCD24B21(H,S) TM9Y080B12MP11 17.5 CF/CM/CU36B 700 24.0 17.7 14.25 12.25
YCD24B21(H,S) TM9Y080B12MP11 17.5 CF42B 875 24.0 19.6 14.25 12.25
YCD24B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU30D 650 23.2 17.0 14.25 12.25
YCD24B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU36C 650 23.4 16.8 14.00 12.25
YCD24B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU36D 650 23.4 16.8 14.00 12.25
YCD24B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU42C 650 23.4 17.0 14.25 12.25
YCD24B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU42D 650 23.4 17.0 14.25 12.25
YCD24B21(H,S) TMLV060A12MP12C 14.5 CF/CM/CU24A 800 24.0 18.8 13.75 11.50
YCD24B21(H,S) TMLV060A12MP12C 14.5 CF/CM/CU30A 800 24.0 18.8 13.75 11.75
YCD24B21(H,S) TMLV060A12MP12C 14.5 CF/CM36A 800 24.0 18.6 13.75 12.00
YCD24B21(H,S) TMLV080B12MP12C 17.5 CF/CM/CU24B 825 24.0 19.1 14.00 11.75
YCD24B21(H,S) TMLV080B12MP12C 17.5 CF/CM/CU30B 825 24.0 19.0 14.00 11.75
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5495504-YTG-B-0518
Johnson Controls Unitary Products 15
YCD24B21(H,S) TMLV080B12MP12C 17.5 CF/CM/CU36B 825 24.0 18.9 14.00 11.75
YCD24B21(H,S) TMLV080B12MP12C 17.5 CF42B 825 24.0 19.0 14.25 12.00
YCD24B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU30C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU30D 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU36C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU36D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU42C 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU42D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU30C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU30D 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU36C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU36D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU42C 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU42D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TMLX060A12MP11 14.5 CF/CM/CU24A 750 23.8 18.2 14.00 11.75
YCD24B21(H,S) TMLX060A12MP11 14.5 CF/CM/CU30A 750 24.0 18.5 14.00 12.00
YCD24B21(H,S) TMLX060A12MP11 14.5 CF/CM36A 775 24.0 18.4 14.25 12.25
YCD24B21(H,S) TMLX080B12MP11 17.5 CF/CM/CU24B 775 24.0 18.6 14.25 12.00
YCD24B21(H,S) TMLX080B12MP11 17.5 CF/CM/CU30B 775 24.0 18.7 14.50 12.25
YCD24B21(H,S) TMLX080B12MP11 17.5 CF/CM/CU36B 775 24.0 18.4 14.50 12.25
YCD24B21(H,S) TMLX080B12MP11 17.5 CF42B 825 24.0 19.1 14.75 12.25
YCD24B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU24C 700 23.4 17.4 14.25 12.25
YCD24B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU30C 700 24.0 17.8 14.25 12.25
YCD24B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU30D 725 24.0 18.2 14.50 12.25
YCD24B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU36C 700 24.0 17.7 14.25 12.25
YCD24B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU36D 725 24.0 17.9 14.50 12.25
YCD24B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU42C 700 24.0 17.8 14.50 12.50
YCD24B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU42D 725 24.0 18.2 14.50 12.50
YCD24B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU24C 700 23.4 17.4 14.25 12.25
YCD24B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU30C 700 24.0 17.8 14.25 12.25
YCD24B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU30D 725 24.0 18.2 14.50 12.25
YCD24B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU36C 700 24.0 17.7 14.25 12.25
YCD24B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU36D 725 24.0 17.9 14.50 12.25
YCD24B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU42C 700 24.0 17.8 14.50 12.50
YCD24B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU42D 725 24.0 18.2 14.50 12.50
YCD24B21(H,S) TP9C080B12MP13C 17.5 CF/CM/CU24B 800 24.0 18.8 14.50 12.25
YCD24B21(H,S) TP9C080B12MP13C 17.5 CF/CM/CU30B 800 24.0 18.8 14.00 12.00
YCD24B21(H,S) TP9C080B12MP13C 17.5 CF/CM/CU36B 800 24.0 18.6 14.50 12.25
YCD24B21(H,S) TP9C080B12MP13C 17.5 CF42B 800 24.0 18.7 14.50 12.25
YCD24B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU30C 900 24.0 19.8 14.00 12.25
YCD24B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU30D 900 24.0 19.8 14.25 12.25
YCD24B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU36C 900 24.0 19.7 14.50 12.25
YCD24B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU36D 900 24.0 19.7 14.50 12.25
YCD24B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU42C 900 24.0 19.4 14.25 12.50
YCD24B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU42D 900 24.0 19.4 14.25 12.50
YCD24B21(H,S) TPLC060A12MP13C 14.5 CF/CM/CU24A 800 24.0 18.8 13.75 11.50
YCD24B21(H,S) TPLC060A12MP13C 14.5 CF/CM/CU30A 800 24.0 18.8 13.75 11.75
YCD24B21(H,S) TPLC060A12MP13C 14.5 CF/CM36A 800 24.0 18.6 13.75 12.00
YCD24B21(H,S) TPLC080B12MP13C 17.5 CF/CM/CU24B 825 24.0 19.1 14.00 11.75
YCD24B21(H,S) TPLC080B12MP13C 17.5 CF/CM/CU30B 825 24.0 19.0 14.00 11.75
YCD24B21(H,S) TPLC080B12MP13C 17.5 CF/CM/CU36B 825 24.0 18.9 14.00 11.75
YCD24B21(H,S) TPLC080B12MP13C 17.5 CF42B 825 24.0 19.0 14.25 12.00
YCD24B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU30C 875 24.0 19.5 14.25 12.25
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5495504-YTG-B-0518
16 Johnson Controls Unitary Products
YCD24B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU30D 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU36C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU36D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU42C 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU42D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU30C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU30D 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU36C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU36D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU42C 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU42D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) YP9C080B12MP13C 17.5 CF/CM/CU24B 800 24.0 18.8 14.50 12.25
YCD24B21(H,S) YP9C080B12MP13C 17.5 CF/CM/CU30B 800 24.0 18.8 14.00 12.00
YCD24B21(H,S) YP9C080B12MP13C 17.5 CF/CM/CU36B 800 24.0 18.6 14.50 12.25
YCD24B21(H,S) YP9C080B12MP13C 17.5 CF42B 800 24.0 18.7 14.50 12.25
YCD24B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU30C 900 24.0 19.8 14.00 12.25
YCD24B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU30D 900 24.0 19.8 14.25 12.25
YCD24B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU36C 900 24.0 19.7 14.50 12.25
YCD24B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU36D 900 24.0 19.7 14.50 12.25
YCD24B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU42C 900 24.0 19.4 14.25 12.50
YCD24B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU42D 900 24.0 19.4 14.25 12.50
YCD24B21(H,S) YPLC060A12MP13C 14.5 CF/CM/CU24A 800 24.0 18.8 13.75 11.50
YCD24B21(H,S) YPLC060A12MP13C 14.5 CF/CM/CU30A 800 24.0 18.8 13.75 11.75
YCD24B21(H,S) YPLC060A12MP13C 14.5 CF/CM36A 800 24.0 18.6 13.75 12.00
YCD24B21(H,S) YPLC080B12MP13C 17.5 CF/CM/CU24B 825 24.0 19.1 14.00 11.75
YCD24B21(H,S) YPLC080B12MP13C 17.5 CF/CM/CU30B 825 24.0 19.0 14.00 11.75
YCD24B21(H,S) YPLC080B12MP13C 17.5 CF/CM/CU36B 825 24.0 18.9 14.00 11.75
YCD24B21(H,S) YPLC080B12MP13C 17.5 CF42B 825 24.0 19.0 14.25 12.00
YCD24B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU30C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU30D 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU36C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU36D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU42C 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU42D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) YPLC100C16MP13C 21.0 CF/CM/CU30C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) YPLC100C16MP13C 21.0 CF/CM/CU30D 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) YPLC100C16MP13C 21.0 CF/CM/CU36C 875 24.0 19.5 14.25 12.25
YCD24B21(H,S) YPLC100C16MP13C 21.0 CF/CM/CU36D 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) YPLC100C16MP13C 21.0 CF/CM/CU42C 875 24.0 19.5 14.50 12.50
YCD24B21(H,S) YPLC100C16MP13C 21.0 CF/CM/CU42D 875 24.0 19.5 14.50 12.50
YCD30B21(H,S) TM8V060A12MP12C 14.5 CF/CM/CU30A 975 29.8 23.2 13.00 11.25
YCD30B21(H,S) TM8V060A12MP12C 14.5 CF/CM36A 975 30.0 23.4 13.25 11.50
YCD30B21(H,S) TM8V080B12MP12C 17.5 CF/CM/CU30B 900 29.0 22.0 13.25 11.50
YCD30B21(H,S) TM8V080B12MP12C 17.5 CF/CM/CU36B 900 29.4 22.2 13.50 11.50
YCD30B21(H,S) TM8V080B12MP12C 17.5 CF42B 900 29.2 22.2 13.50 11.75
YCD30B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU30C 1050 30.0 24.0 13.75 11.75
YCD30B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU30D 1050 30.0 24.0 14.00 12.20
YCD30B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU36C 1050 30.0 24.0 14.00 11.75
YCD30B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU36D 1050 30.0 24.0 14.00 12.25
YCD30B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU42C 1050 30.0 24.0 14.00 12.00
YCD30B21(H,S) TM8V080C16MP12C 21.0 CF/CM/CU42D 1050 30.0 24.0 14.25 12.25
YCD30B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU30C 1050 30.0 24.0 13.75 11.75
YCD30B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU30D 1050 30.0 24.0 14.00 12.20
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5495504-YTG-B-0518
Johnson Controls Unitary Products 17
YCD30B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU36C 1050 30.0 24.0 14.00 11.75
YCD30B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU36D 1050 30.0 24.0 14.00 12.25
YCD30B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU42C 1050 30.0 24.0 14.00 12.00
YCD30B21(H,S) TM8V100C16MP12C 21.0 CF/CM/CU42D 1050 30.0 24.0 14.25 12.25
YCD30B21(H,S) TM8X060A12MP11 14.5 CF/CM/CU30A 875 28.6 22.0 13.25 11.50
YCD30B21(H,S) TM8X060A12MP11 14.5 CF/CM36A 875 29.0 21.6 13.25 11.50
YCD30B21(H,S) TM8X080B12MP11 17.5 CF/CM/CU30B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TM8X080B12MP11 17.5 CF/CM/CU36B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TM8X080B12MP11 17.5 CF42B 950 30.0 23.4 14.00 11.75
YCD30B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU30C 950 29.8 23.2 14.00 12.00
YCD30B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU30D 975 30.0 23.4 14.25 12.25
YCD30B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU36C 950 30.0 23.0 14.00 12.00
YCD30B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU36D 975 30.0 23.2 14.25 12.00
YCD30B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU42C 950 30.0 23.4 14.25 12.25
YCD30B21(H,S) TM8X080C16MP11 21.0 CF/CM/CU42D 975 30.0 23.4 14.50 12.25
YCD30B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU30C 950 29.8 23.2 14.00 12.00
YCD30B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU30D 975 30.0 23.4 14.25 12.25
YCD30B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU36C 950 30.0 23.0 14.00 12.00
YCD30B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU36D 975 30.0 23.2 14.25 12.00
YCD30B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU42C 950 30.0 23.4 14.25 12.25
YCD30B21(H,S) TM8X100C16MP11 21.0 CF/CM/CU42D 975 30.0 23.4 14.50 12.25
YCD30B21(H,S) TM8X100C20MP11 21.0 CF/CM/CU30C 1000 30.0 24.0 14.25 12.25
YCD30B21(H,S) TM8X100C20MP11 21.0 CF/CM/CU30D 1000 30.0 24.0 14.00 12.00
YCD30B21(H,S) TM8X100C20MP11 21.0 CF/CM/CU36C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM8X100C20MP11 21.0 CF/CM/CU36D 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM8X100C20MP11 21.0 CF/CM/CU42C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM8X100C20MP11 21.0 CF/CM/CU42D 1000 30.0 23.6 14.50 12.25
YCD30B21(H,S) TM8X120C20MP11 21.0 CF/CM/CU30C 1000 30.0 24.0 14.25 12.25
YCD30B21(H,S) TM8X120C20MP11 21.0 CF/CM/CU30D 1000 30.0 24.0 14.00 12.00
YCD30B21(H,S) TM8X120C20MP11 21.0 CF/CM/CU36C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM8X120C20MP11 21.0 CF/CM/CU36D 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM8X120C20MP11 21.0 CF/CM/CU42C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM8X120C20MP11 21.0 CF/CM/CU42D 1000 30.0 23.6 14.50 12.25
YCD30B21(H,S) TM8Y060A12MP11 14.5 CF/CM/CU30A 875 28.6 22.0 13.25 11.50
YCD30B21(H,S) TM8Y060A12MP11 14.5 CF/CM36A 875 29.0 21.6 13.25 11.50
YCD30B21(H,S) TM8Y080B12MP11 17.5 CF/CM/CU30B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TM8Y080B12MP11 17.5 CF/CM/CU36B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TM8Y080B12MP11 17.5 CF42B 950 30.0 23.4 14.00 11.75
YCD30B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU30C 950 29.8 23.2 14.00 12.00
YCD30B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU30D 975 30.0 23.4 14.25 12.25
YCD30B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU36C 950 30.0 23.0 14.00 12.00
YCD30B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU36D 975 30.0 23.2 14.25 12.00
YCD30B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU42C 950 30.0 23.4 14.25 12.25
YCD30B21(H,S) TM8Y080C16MP11 21.0 CF/CM/CU42D 975 30.0 23.4 14.50 12.25
YCD30B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU30C 950 29.8 23.2 14.00 12.00
YCD30B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU30D 975 30.0 23.4 14.25 12.25
YCD30B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU36C 950 30.0 23.0 14.00 12.00
YCD30B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU36D 975 30.0 23.2 14.25 12.00
YCD30B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU42C 950 30.0 23.4 14.25 12.25
YCD30B21(H,S) TM8Y100C16MP11 21.0 CF/CM/CU42D 975 30.0 23.4 14.50 12.25
YCD30B21(H,S) TM8Y100C20MP11 21.0 CF/CM/CU30C 1000 30.0 24.0 14.25 12.25
YCD30B21(H,S) TM8Y100C20MP11 21.0 CF/CM/CU30D 1000 30.0 24.0 14.00 12.00
YCD30B21(H,S) TM8Y100C20MP11 21.0 CF/CM/CU36C 1000 30.0 23.6 14.25 12.25
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5495504-YTG-B-0518
18 Johnson Controls Unitary Products
YCD30B21(H,S) TM8Y100C20MP11 21.0 CF/CM/CU36D 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM8Y100C20MP11 21.0 CF/CM/CU42C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM8Y100C20MP11 21.0 CF/CM/CU42D 1000 30.0 23.6 14.50 12.25
YCD30B21(H,S) TM8Y120C20MP11 21.0 CF/CM/CU30C 1000 30.0 24.0 14.25 12.25
YCD30B21(H,S) TM8Y120C20MP11 21.0 CF/CM/CU30D 1000 30.0 24.0 14.00 12.00
YCD30B21(H,S) TM8Y120C20MP11 21.0 CF/CM/CU36C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM8Y120C20MP11 21.0 CF/CM/CU36D 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM8Y120C20MP11 21.0 CF/CM/CU42C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM8Y120C20MP11 21.0 CF/CM/CU42D 1000 30.0 23.6 14.50 12.25
YCD30B21(H,S) TM9E080B12MP11 17.5 CF/CM/CU30B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TM9E080B12MP11 17.5 CF/CM/CU36B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TM9E080B12MP11 17.5 CF42B 975 30.0 23.4 14.00 11.75
YCD30B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU30C 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU30D 1000 30.0 24.0 13.75 11.75
YCD30B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU36C 975 30.0 23.2 14.00 12.00
YCD30B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU36D 1000 30.0 23.6 14.00 12.00
YCD30B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU42C 975 30.0 23.4 14.00 11.75
YCD30B21(H,S) TM9E100C16MP11 21.0 CF/CM/CU42D 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM9E120D20MP11 24.5 CF/CM/CU30D 950 29.8 23.2 14.25 12.25
YCD30B21(H,S) TM9E120D20MP11 24.5 CF/CM/CU36D 950 30.0 23.0 14.25 12.25
YCD30B21(H,S) TM9E120D20MP11 24.5 CF/CM/CU42D 950 30.0 23.4 14.50 12.25
YCD30B21(H,S) TM9V080B12MP12C 17.5 CF/CM/CU30B 975 30.0 23.4 13.50 11.50
YCD30B21(H,S) TM9V080B12MP12C 17.5 CF/CM/CU36B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TM9V080B12MP12C 17.5 CF42B 975 30.0 23.4 14.00 11.75
YCD30B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU30C 1000 30.0 24.0 14.00 11.75
YCD30B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU30D 975 30.0 23.4 14.00 12.25
YCD30B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU36C 1000 30.0 23.6 14.00 12.00
YCD30B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU36D 975 30.0 23.2 14.00 12.25
YCD30B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU42C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM9V100C16MP12C 21.0 CF/CM/CU42D 975 30.0 23.4 14.25 12.25
YCD30B21(H,S) TM9V100C20MP12C 21.0 CF/CM/CU30D 1100 30.0 24.8 13.75 12.20
YCD30B21(H,S) TM9V100C20MP12C 21.0 CF/CM/CU36C 1100 30.0 24.6 13.75 11.75
YCD30B21(H,S) TM9V100C20MP12C 21.0 CF/CM/CU36D 1100 30.0 24.6 13.75 12.20
YCD30B21(H,S) TM9V100C20MP12C 21.0 CF/CM/CU42C 1100 30.0 24.4 13.75 12.20
YCD30B21(H,S) TM9V100C20MP12C 21.0 CF/CM/CU42D 1100 30.0 24.4 14.00 12.20
YCD30B21(H,S) TM9V120D20MP12C 24.5 CF/CM/CU36D 1050 30.0 24.0 14.50 12.50
YCD30B21(H,S) TM9V120D20MP12C 24.5 CF/CM/CU42D 1050 30.0 24.0 14.25 12.25
YCD30B21(H,S) TM9Y080B12MP11 17.5 CF/CM/CU30B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TM9Y080B12MP11 17.5 CF/CM/CU36B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TM9Y080B12MP11 17.5 CF42B 975 30.0 23.4 14.00 11.75
YCD30B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU30C 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU30D 1000 30.0 24.0 13.75 11.75
YCD30B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU36C 975 30.0 23.2 14.00 12.00
YCD30B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU36D 1000 30.0 23.6 14.00 12.00
YCD30B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU42C 975 30.0 23.4 14.00 11.75
YCD30B21(H,S) TM9Y100C16MP11 21.0 CF/CM/CU42D 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TM9Y120D20MP11 24.5 CF/CM/CU30D 950 29.8 23.2 14.25 12.25
YCD30B21(H,S) TM9Y120D20MP11 24.5 CF/CM/CU36D 950 30.0 23.0 14.25 12.25
YCD30B21(H,S) TM9Y120D20MP11 24.5 CF/CM/CU42D 950 30.0 23.4 14.50 12.25
YCD30B21(H,S) TMLV060A12MP12C 14.5 CF/CM/CU30A 975 29.8 23.2 13.00 11.25
YCD30B21(H,S) TMLV060A12MP12C 14.5 CF/CM36A 975 30.0 23.4 13.25 11.50
YCD30B21(H,S) TMLV080B12MP12C 17.5 CF/CM/CU30B 900 29.0 22.0 13.25 11.50
YCD30B21(H,S) TMLV080B12MP12C 17.5 CF/CM/CU36B 900 29.4 22.2 13.50 11.50
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5495504-YTG-B-0518
Johnson Controls Unitary Products 19
YCD30B21(H,S) TMLV080B12MP12C 17.5 CF42B 900 29.2 22.2 13.50 11.75
YCD30B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU30C 1050 30.0 24.0 13.75 11.75
YCD30B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU30D 1050 30.0 24.0 14.00 12.20
YCD30B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU36C 1050 30.0 24.0 14.00 11.75
YCD30B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU36D 1050 30.0 24.0 14.00 12.25
YCD30B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU42C 1050 30.0 24.0 14.00 12.00
YCD30B21(H,S) TMLV080C16MP12C 21.0 CF/CM/CU42D 1050 30.0 24.0 14.25 12.25
YCD30B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU30C 1050 30.0 24.0 13.75 11.75
YCD30B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU30D 1050 30.0 24.0 14.00 12.20
YCD30B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU36C 1050 30.0 24.0 14.00 11.75
YCD30B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU36D 1050 30.0 24.0 14.00 12.25
YCD30B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU42C 1050 30.0 24.0 14.00 12.00
YCD30B21(H,S) TMLV100C16MP12C 21.0 CF/CM/CU42D 1050 30.0 24.0 14.25 12.25
YCD30B21(H,S) TMLX060A12MP11 14.5 CF/CM/CU30A 875 28.6 22.0 13.25 11.50
YCD30B21(H,S) TMLX060A12MP11 14.5 CF/CM36A 875 29.0 21.6 13.25 11.50
YCD30B21(H,S) TMLX080B12MP11 17.5 CF/CM/CU30B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TMLX080B12MP11 17.5 CF/CM/CU36B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TMLX080B12MP11 17.5 CF42B 950 30.0 23.4 14.00 11.75
YCD30B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU30C 950 29.8 23.2 14.00 12.00
YCD30B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU30D 975 30.0 23.4 14.25 12.25
YCD30B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU36C 950 30.0 23.0 14.00 12.00
YCD30B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU36D 975 30.0 23.2 14.25 12.00
YCD30B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU42C 950 30.0 23.4 14.25 12.25
YCD30B21(H,S) TMLX080C16MP11 21.0 CF/CM/CU42D 975 30.0 23.4 14.50 12.25
YCD30B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU30C 950 29.8 23.2 14.00 12.00
YCD30B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU30D 975 30.0 23.4 14.25 12.25
YCD30B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU36C 950 30.0 23.0 14.00 12.00
YCD30B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU36D 975 30.0 23.2 14.25 12.00
YCD30B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU42C 950 30.0 23.4 14.25 12.25
YCD30B21(H,S) TMLX100C16MP11 21.0 CF/CM/CU42D 975 30.0 23.4 14.50 12.25
YCD30B21(H,S) TMLX100C20MP11 21.0 CF/CM/CU30C 1000 30.0 24.0 14.25 12.25
YCD30B21(H,S) TMLX100C20MP11 21.0 CF/CM/CU30D 1000 30.0 24.0 14.00 12.00
YCD30B21(H,S) TMLX100C20MP11 21.0 CF/CM/CU36C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TMLX100C20MP11 21.0 CF/CM/CU36D 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TMLX100C20MP11 21.0 CF/CM/CU42C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TMLX100C20MP11 21.0 CF/CM/CU42D 1000 30.0 23.6 14.50 12.25
YCD30B21(H,S) TMLX120C20MP11 21.0 CF/CM/CU30C 1000 30.0 24.0 14.25 12.25
YCD30B21(H,S) TMLX120C20MP11 21.0 CF/CM/CU30D 1000 30.0 24.0 14.00 12.00
YCD30B21(H,S) TMLX120C20MP11 21.0 CF/CM/CU36C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TMLX120C20MP11 21.0 CF/CM/CU36D 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TMLX120C20MP11 21.0 CF/CM/CU42C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TMLX120C20MP11 21.0 CF/CM/CU42D 1000 30.0 23.6 14.50 12.25
YCD30B21(H,S) TP9C080B12MP13C 17.5 CF/CM/CU30B 975 30.0 23.4 13.50 11.50
YCD30B21(H,S) TP9C080B12MP13C 17.5 CF/CM/CU36B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) TP9C080B12MP13C 17.5 CF42B 975 30.0 23.4 14.00 11.75
YCD30B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU30C 1000 30.0 24.0 14.00 11.75
YCD30B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU30D 975 30.0 23.4 14.00 12.25
YCD30B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU36C 1000 30.0 23.6 14.00 12.00
YCD30B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU36D 975 30.0 23.2 14.00 12.25
YCD30B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU42C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) TP9C100C16MP13C 21.0 CF/CM/CU42D 975 30.0 23.4 14.25 12.25
YCD30B21(H,S) TP9C100C20MP13C 21.0 CF/CM/CU30D 1100 30.0 24.8 13.75 12.20
YCD30B21(H,S) TP9C100C20MP13C 21.0 CF/CM/CU36C 1100 30.0 24.6 13.75 11.75
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5495504-YTG-B-0518
20 Johnson Controls Unitary Products
YCD30B21(H,S) TP9C100C20MP13C 21.0 CF/CM/CU36D 1100 30.0 24.6 13.75 12.20
YCD30B21(H,S) TP9C100C20MP13C 21.0 CF/CM/CU42C 1100 30.0 24.4 13.75 12.20
YCD30B21(H,S) TP9C100C20MP13C 21.0 CF/CM/CU42D 1100 30.0 24.4 14.00 12.20
YCD30B21(H,S) TP9C120D20MP13C 24.5 CF/CM/CU36D 1050 30.0 24.0 14.50 12.50
YCD30B21(H,S) TP9C120D20MP13C 24.5 CF/CM/CU42D 1050 30.0 24.0 14.25 12.25
YCD30B21(H,S) TPLC060A12MP13C 14.5 CF/CM/CU30A 975 29.8 23.2 13.00 11.25
YCD30B21(H,S) TPLC060A12MP13C 14.5 CF/CM36A 975 30.0 23.4 13.25 11.50
YCD30B21(H,S) TPLC080B12MP13C 17.5 CF/CM/CU30B 900 29.0 22.0 13.25 11.50
YCD30B21(H,S) TPLC080B12MP13C 17.5 CF/CM/CU36B 900 29.4 22.2 13.50 11.50
YCD30B21(H,S) TPLC080B12MP13C 17.5 CF42B 900 29.2 22.2 13.50 11.75
YCD30B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU30C 1050 30.0 24.0 13.75 11.75
YCD30B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU30D 1050 30.0 24.0 14.00 12.20
YCD30B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU36C 1050 30.0 24.0 14.00 11.75
YCD30B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU36D 1050 30.0 24.0 14.00 12.25
YCD30B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU42C 1050 30.0 24.0 14.00 12.00
YCD30B21(H,S) TPLC080C16MP13C 21.0 CF/CM/CU42D 1050 30.0 24.0 14.25 12.25
YCD30B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU30C 1050 30.0 24.0 13.75 11.75
YCD30B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU30D 1050 30.0 24.0 14.00 12.20
YCD30B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU36C 1050 30.0 24.0 14.00 11.75
YCD30B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU36D 1050 30.0 24.0 14.00 12.25
YCD30B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU42C 1050 30.0 24.0 14.00 12.00
YCD30B21(H,S) TPLC100C16MP13C 21.0 CF/CM/CU42D 1050 30.0 24.0 14.25 12.25
YCD30B21(H,S) YP9C080B12MP13C 17.5 CF/CM/CU30B 975 30.0 23.4 13.50 11.50
YCD30B21(H,S) YP9C080B12MP13C 17.5 CF/CM/CU36B 975 30.0 23.4 13.75 11.75
YCD30B21(H,S) YP9C080B12MP13C 17.5 CF42B 975 30.0 23.4 14.00 11.75
YCD30B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU30C 1000 30.0 24.0 14.00 11.75
YCD30B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU30D 975 30.0 23.4 14.00 12.25
YCD30B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU36C 1000 30.0 23.6 14.00 12.00
YCD30B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU36D 975 30.0 23.2 14.00 12.25
YCD30B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU42C 1000 30.0 23.6 14.25 12.25
YCD30B21(H,S) YP9C100C16MP13C 21.0 CF/CM/CU42D 975 30.0 23.4 14.25 12.25
YCD30B21(H,S) YP9C100C20MP13C 21.0 CF/CM/CU30D 1100 30.0 24.8 13.75 12.20
YCD30B21(H,S) YP9C100C20MP13C 21.0 CF/CM/CU36C 1100 30.0 24.6 13.75 11.75
YCD30B21(H,S) YP9C100C20MP13C 21.0 CF/CM/CU36D 1100 30.0 24.6 13.75 12.20
YCD30B21(H,S) YP9C100C20MP13C 21.0 CF/CM/CU42C 1100 30.0 24.4 13.75 12.20
YCD30B21(H,S) YP9C100C20MP13C 21.0 CF/CM/CU42D 1100 30.0 24.4 14.00 12.20
YCD30B21(H,S) YP9C120D20MP13C 24.5 CF/CM/CU36D 1050 30.0 24.0 14.50 12.50
YCD30B21(H,S) YP9C120D20MP13C 24.5 CF/CM/CU42D 1050 30.0 24.0 14.25 12.25
YCD30B21(H,S) YPLC060A12MP13C 14.5 CF/CM/CU30A 975 29.8 23.2 13.00 11.25
YCD30B21(H,S) YPLC060A12MP13C 14.5 CF/CM36A 975 30.0 23.4 13.25 11.50
YCD30B21(H,S) YPLC080B12MP13C 17.5 CF/CM/CU30B 900 29.0 22.0 13.25 11.50
YCD30B21(H,S) YPLC080B12MP13C 17.5 CF/CM/CU36B 900 29.4 22.2 13.50 11.50
YCD30B21(H,S) YPLC080B12MP13C 17.5 CF42B 900 29.2 22.2 13.50 11.75
YCD30B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU30C 1050 30.0 24.0 13.75 11.75
YCD30B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU30D 1050 30.0 24.0 14.00 12.20
YCD30B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU36C 1050 30.0 24.0 14.00 11.75
YCD30B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU36D 1050 30.0 24.0 14.00 12.25
YCD30B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU42C 1050 30.0 24.0 14.00 12.00
YCD30B21(H,S) YPLC080C16MP13C 21.0 CF/CM/CU42D 1050 30.0 24.0 14.25 12.25
YCD30B21(H,S) YPLC100C16MP13C 21.0 CF/CM/CU30C 1050 30.0 24.0 13.75 11.75
YCD30B21(H,S) YPLC100C16MP13C 21.0 CF/CM/CU30D 1050 30.0 24.0 14.00 12.20
YCD30B21(H,S) YPLC100C16MP13C 21.0 CF/CM/CU36C 1050 30.0 24.0 14.00 11.75
YCD30B21(H,S) YPLC100C16MP13C 21.0 CF/CM/CU36D 1050 30.0 24.0 14.00 12.25
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.