YOTRIO FOSTER SWIVEL WICKER CHAIR FRS50006B User manual

Item # FRS50006B
FOSTER SWIVEL WICKER CHAIR
DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
www.yotrioint.com
OR TOLL FREE AT:
1-866-905-4107
MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC TIME /
11:30 AM TO 8:00 PM EASTERN TIME
Warranty
1 YEAR FRAME AND 1 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for one year, and a
one year limited warranty for the fabric.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center.
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In
addition, purchased parts are not covered under this warranty. We reserve the right to make substitutions
with similar merchandise, if the model in question is no longer in production.
WARNING
For your own safety, and to reduce the risk of serious personal injury, the user must read and understand
this Use and Care Guide, and assemble each piece only in accordance with these instructions and with
the parts and hardware included with the original packaging.
Failure to follow instructions and/or use of tools or hardware not included in the original packaging may
lead to improper assembly and/or risk of serious personal injury.
Questions or concerns, please call 1-866-905-4107

2
PARTS LIST
PART
QTY
PICTURE
DESCRIPTION
A
1 PC
TOP
B
1 PC
SEAT
C
1 PC
BASE
D
4 PCS
LOCK WASHER
E
7 PCS
NUT
F
14 PCS
WASHER
G
3 PCS
BOLT (M6*42)
H
4 PCS
BOLT (M6*30)
I
2 PCS
SMALL PILLOW
J
1PC
BACK CUSHION
K
1PC
SEAT CUSHION
L
2 PCS
WRENCH
M
1 PC
ALLEN WRENCH

3
Assembly:
STEP 1
A. PLACE SEAT (B) UPSIDE DOWN ON A SOFT,
PROTECTED SURFACE.
B. TURN BASE (C) UPSIDE DOWN AND PUT IT
ON THE BOTTOM OF SEAT (B).
STEP 2
A. ATTACH BASE (C) TO SEAT (B) BY USING
BOLT (H), WASHER (F), LOCK WASHER (D) AND NUT (E).
B. TIGHTEN ALL BOLTS WITH WRENCH (L).
STEP 3
A. ROTATE THE CHAIR TO THE UPRIGHT POSITION, PUT
TOP(A) ON SEAT (B).

4
Assembly:
STEP 4
A. ATTACH TOP (A) TO SEAT (B) USING
BOLT (G), WASHER (F) AND NUT (E).
B. TIGHTEN ALL BOLTS WITH ALLEN WRENCH (M).
STEP 5
A. PLACE SEAT CUSHION (K), BACK CUSHION (J) AND
SMALL PILLOWS (I) ON THE CHAIR.
B. ENSURE ALL CONNECTIONS ARE SECURE BEFORE
USE.
C. PERIODICALLY TIGHTEN ALL BOLTS THAT MAY HAVE
BECOME LOOSE USING WRENCH (L) AND ALLEN
WRENCH (M).
WARNING
THE WEIGHT LIMIT FOR THIS CHAIR IS 250 LBS (112.5 KG). ANY USE BY AN INDIVIDUAL WEIGHING
MORE THAN 250 LBS (112.5 KG) MAY LEAD TO CHAIR IMBALANCE AND/OR TIPPING, AND RISK OF
SERIOUS PERSONAL INJURY.
CARE AND CLEANING
FRAME: WIPE CLEAN WITH A MILD SOAP AND WATER SOLUTION, RINSE WITH CLEAN WATER, AND
DRY THOROUGHLY.
IN ORDER TO PROLONG THE LIFE OF YOUR CHAIR, PLEASE STORE IN DRY SHELTERED PLACE
WHEN NOT IN USE OR DURING INCLEMENT WEATHER.