Yunmai Fascial Gun Pro Basic User manual

YUNMAI Fascia Massage
Gun Pro Basic
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –21
Čeština
22 –40
Slovenčina
41 –59
Magyar
60 –78
Deutsch
79 –97

3
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
Thank you for purchasing this product. Please read this manual carefully before use.
For future reference, please ensure this manual is properly kept.
Application scope:
The product can be used for physiotherapeutic massage before and after workout.
Key Information
To reduce risks of malfunction, electric shock, injury, fire, death and damage to
equipment, please read all statements and warnings in this manual carefully before use.
Prohibitions
1. The use of this product by underaged and injured persons is strictly prohibited. In the
event of muscle injury, please consult your physician before using this product.
2. Do not use this product on wet or dirty skin. This product can be used on clothed
areas. Users can press this product on the skin gently, move it along different spots,
letting it stay at each particular spot for about 60s.
3. Do not use this product on body parts above the neck, nor on body parts with less
muscle or bone content. This product can be only used on soft tissues when the user
does not experience pain or adverse reaction.
4. Do not use this product on body parts with bruises, pain, or adverse reaction.
5. Do not place foreign objects in the vent of the product.
6. Do not immerse the product in water. Do not allow water to enter the vent.
7. Do not place the product in or near sources of fire.
8. Do not throw or drop the product on purpose.
9. Do not recharge the product with chargers other than the one provided by Yunmai.
10. Do not disassemble the product.
11. Fingers, hair or other parts of the body may be trapped in the shaft and back side of
the massage head. Do not come into close contact with these areas.
12. Not for children under 8 years old. Children are not allowed to use, clean, and
maintain the product without supervision.

5
Do not touch this part to avoid pinching, when the machine is on
without massage head installed.
Do not touch this part to avoid pinching, when the machine is n
with massage head installed.
Statement
Those having any one of the following circumstances shall consult the doctor before
using.
1. Pregnant women
2. Pacemaker wearer
3. Undergone surgery recently
4. Abnormalities in spines, joints or bones
5. Complications caused by other diseases (such as neuropathy or retinal damage)
Current research focuses on the influence of vibrational training on special medical
conditions and may reduce the scope for the above-mentioned contraindications.
Practical experience has shown that the combination of treatment and vibrational
training also serves as a type of therapy in many circumstances. However, such an
approach should be recommended by physicians, experts or therapists or be conducted
in their presence.
Precautions
01. Unplug the charger after the completion of charging.
02. Do not use the product when it is charged.
03. Please use the product according to the instructions.
04. Before each use, carefully check whether the product can be used normally
according to the operation methods stipulated in the instructions.

6
Product Introduction
Thank you for choosing Yunmai Fascial Gun Pro Basic
Round Head
Mainly Used for
large muscle
groups
U-shaped Head
Mainly used for the
neck, both sides of
spines and achilles
tendons
Flat Head
Mainly used to
relax and shape
muscle parts
Bullet Head
Mainly used to
impact deep tissues
Massage head
Fascial Gun Body
Power Indicator
Gear Indicator
On / Off Key
Charging Port

7
Use Method
Operation
1. Gear indicator: Gear 1 to Gear 3.
2. Power indicator:
1 When the indicator light turns white, the battery power is equal to or greater
than 20%. to or greater than 20%.
2. When the indicator light turns red, the battery power is less than 20%, please
charge in time. (In the process of charging, if the indicator light flashes white, it
means the product is charging; if the white light is always, it means the product is
charging; if the white light is always on, it means the product is fully charged)
3. When the indicator light flashes red, the battery power is less than 5%, and the
product will stop working.
3. ON/OFF key:
1. After pressing and holding the ON/OFF key for 2s, the product will be turned
on, and the power indicator and gear indicator will be on simultaneously to enter
Gear 1 by default. Then press the ON/OFF key to enter Gear 2, followed by Gear
3, Neutral (Standby) and Gear 1 if pressed once again and again after the
previous operation, and enter the recycle.
2.Press and hold for shutdown in any mode.
3.In neutral (standby) status, the product will automatically shut down in case of
no operation for 15s. down in case of no operation for 15s.
4. The product will enter the intelligent power-off protection mode after
continuous use of 10min. In this case, restart the product if you need to use it.
Power Indicator
Gear Indicator
On / Off Key

8
Massage Head Assembling
Round Head
Bullet Head
Flat Head
U-shaped head
Notes: The red solid line in the figure is the line for alignment, which is bright black in
the actual product. When assembling or replacing the massage head, please insert the
massage head directly into the mouth of the fascial gun until the line for alignment
coincides with the mouth (as shown in the figure); when replacing the massage head,
pull out the massage head directly.
Charging
The charging port is located at the bottom of the fascial gunner handle
Charging Port
Charging Cable

9
1.Before the first use, please fully charge the battery of the product.
2.When recharging, connect the DC interface of 26V adapter to the recharging interface
of the battery, and plug the AC cable in a 100-240V power socket.
3.When the power indicator on the product flashes regularly, it means the product is
charging.
4.When the power indicator is always on, it means the product is fully charged.,
5.The battery can be charged at any time and at any power level, and the product
cannot be started when charging.
6.If the power indicator turns red, please charge it.
Basic Parameters
Name: YUNMAJ Fascia Massage Gun
Pro Basic
Model: YMJM-551S
Net weight: 1 kg
Input voltage: 100-240V-50/60Hz
Interface type: DC, 26V =1A
Battery capacity: 2600mAh
Intensity gears: 3 gears for adjustment
Charging time: About 4h
Power supply mode: Rechargeable Li-
ion battery
Applicable environment: 0-40•C
Size: 183 X 230 X 71mm
Applicable age: Adults above the age of 18
(except pregnant women)
Frequently Asked Questions
Start-up failure
High temperature:
When used in the environment above 40°C, the fascia gun may trigger overheating
protection, causing normal start-up failure of the fascia gun.
Solution:
Place the fascia gun in an environment below 40°C for 2h before starting it up for use.

10
2. Battery capacity is " 0 "
When the battery is out of power, if the user does not charge it for a long time, the
battery will initiate low-battery protection, collectively referred to as over discharge
protection.
The fascia gun cannot work normally if it is started at this time.
Solution:
Keep the fascia gun off, then connect the charger (power adapter), and the fascia gun
will automatically enter the charging state. When it is fully charged, unplug the charger,
and the fascia gun can work normally.
Charging failure
1. High fascia gun temperature:
When the temperature of the fascia gun body is too high, it cannot be charged when it is
connected to the charger.
Solution:
Place the fascia gun in an environment below 40°C for 2h before charging.
2. High charger temperature:
When the fascia gun is charged in the environment above 40°C, the power adapter may
trigger overheating protection, thus causing normal charging failure of the fascia gun.
Solution:
Place the fascia gun in an environment below 40°C for 2h before charging.