Zamel EXTA EDM-01 User manual

EDM - 01 SIGNALLING MODULE INSTRUCTION MANUAL
ZAMEL Sp. z o.o.
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. [phone], Fax [phone]
www.zamelcet.com, e-mail: [email protected]
FEATURES
TECHNICAL DATA
DESCRIPTION
APPERANCE
یApplicable in signalling systems ,
یContinuous duty acoustic module ,
یSupplied directly from 230 V AC
network,
یHigh sound level,
یSingle-module casing
,
یMounted on TH 35 rail .
The EDM-01 signalling module may
be used in various systems, where
acoustic alarm is needed, e.g. as an
alarm signalling device. The module
is very flexible and applicable in
many circuits owing to the fact that
it is supplied directly from 230 V AC
network.
EDM - 01
Power terminals: L, N
Rated voltage: 230 V~
Rated voltage tolerance: -15 ÷ +10 %
Rated frequency: 50 / 60 Hz
Rated current: 15 mA
Load supply indicator: piezoelectric loudspeaker
Connection terminals quantity: 2
Connection wire section: 0,2 ÷ 2,50 mm2
Operating temperature: -20 ÷ +45 oC
Operating position: optional
Casing fastening: TH 35 rail (according to PN-EN 60715)
Casing IP: IP20 (PN-EN 60529)
Protection class: II
Overvoltage category: II
Pollution level: 2
Dimensions: single-module (17,5 mm) 90x17,5x66 mm
Weight: 51 g
Standard conformity: PN-EN 60669-1; PN-EN 60669-2-1
PN-EN 61000-4-2,3,4,5,6,11
Piezoelectric loudspeaker
Power terminal (L) Power terminal (N)
The device should be
connected to a single-
phase system accordin-
gly to current standards.
The device connections
will be described in this
manual. Only qualified electricians are
allowed to mount, connect and adjust
the bell. It is necessary to read this ma-
nual before the device mounting. Do not
disassembly the timer casing or you will
lose any warranty rights and expose
yourself to the electric shock hazard.
Before mounting operation make sure
seriwnoitcennocehtgnitcennocsidfo
from the electric network. Use a cross-
head screwdriver of 3.5 mm diameter
to mount the device. The bell should
be carried, stored and used in an ap-
propriate way. Do not mount the bell in
case of any device parts lack, damage
or deformation. In case of malfunction
please notify the manufacturer.
CAUTION

ASSEMBLY, OPERATION
APPLICATIONCASING DIMENSIONS
PRODUCT FAMILY
The EDM-01 signalling module is a mem-
ber of the EDM family.
1. Disconnect the electric network
by means of an appropriate cut-
off, current-limiting circuit-brea-
ker or separator.
2. Check if there is no any vol-
tage between power leads by
means of an appropriate gau-
ge.
3. Mount the EDM-01module on TH
- 35 rail.
4. Connect the system leads accor-
ding tothe electrical diagram.
5. Connect power supply circuit.
The device is ready to work just
right after its appropriate connecting.
An internal piezoelectric loudspea-
ker is ON after the module supplying
with 230 V~ voltage. The speaker is
OFF when power supply is OFF.
CONNECTIONS TIME DIAGRAMS
UNIT DIAGRAM
Device version:
01 - continuous op
02 - resettable
03 - bell
Device type
EDM - xx
L
N
L
N
The circuit warns against motor switch-OFF.
After the motor star by means of MOM-02
module, the PCM-01 counts preset time
(e.g. 10 s). During this period the EDM-01
module generates acoustic signal. When the
preset time is over, the sound will be OFF
and the motor starts.
PSU
WARRANTY
The product warranty is for a period of 24 months
Dealer signature & stamp, purchase date
1. ZAMEL provides a two-year warranty for its products.
2. The ZAMEL warranty does not cover: a) mechanical defects resulting from transport, loading / unloading or other circumstances
b) defects resulting from incorrect installation or operation of ZAMEL products; c) defects resulting from any changes made by CUS-
TOMERS or third parties, to products sold or equipment necessary for the correct operation of products sold; d) defects resulting
from force majeure or other aleatory events for which ZAMEL is not liable; e) power supply (batteries) to be equipped with a device
in the moment of sale (if they appear);
3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering a defect.;
4. ZAMEL will review complaints in accordance with existing regulations.;
5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL.
6. Guarantee does not exclude, does not limit, nor does it suspend the rights of the PURCHASER resulting from the discrepancy
between the goods and the contract.