Zamel LKM - 01 User manual

POWER SUPPLY INDICATOR LKM - 01 INSTRUCTION MANUAL
FEATURES
TECHNICAL PARAMETERS
DESCRIPTION
APPEARANCE
ver. 0.4.2 _ 2006.06.20_14:00
LKM - 01
Input (supply) terminals : L1, L2, L3, N
Input rated voltage: 230/400 V~
Input voltage tolerance: from -15 to +10 %
Rated frequency: 50 / 60 Hz
Rated power consumption (type 10, 20, 30, 40): 1,5 / 6 / 0,9 / 2,8 mA
Power supply indicator: 3x LED
Number of terminal clamps: 4
Section of connecting cables: from 0,2 to 2,5 mm2
Ambient temperature range: from -20 to +45 oC
Operating position: free
Mounting: TH35 rail (PN-EN 60715)
Protection degree: IP20 (PN-EN 60529)
Protection class: II
Overvoltage category: II
Pollution degree: 2
Rated impulse withstand voltage: 1 kV (PN-EN 61000-4-5)
Dimensions (height / width / depth): monomodular (17,5 mm) 90x17,5x66 mm
Weight: 47 g
Reference standards : PN-EN 60947-5-1, PN-EN 60947-1
PN-EN 61000-4-2,3,4,5,6,11
ی Optical voltage presence signal-
ling,
ی LED diodes with increased light
emission,
ی longdurabilityoflightingelements,
ی easyadaptationforspecialuse,
ی monomodularcasing,
ی TH-35DINrailinstallation.
The device is used to signal the
presence of voltage in a three-phase
supply system. It is realized by means
of three LEDs (L1, L2, L3). There are
four colours of the LED diode available
(red, green, yellow and mixed). LKM-01
power supply indicator can be used in
the TN-C supply system (together with
point zero).
Input (supply) terminals (N)
Input (supply) terminals (L3)
Input (supply) terminals (L1)
Input (supply) terminals (L2)
Voltage indicator
Zakład Mechaniki i Elektroniki
ZAMEL sp.j.
J.W.Dzida,K.Łodzińska
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. [phone], Fax [phone]
www.zamel.pl, e-mail: [email protected]
The device is designed
for three-phase installa-
tion and must be instal-
led in accordance with
standards valid in a par-
ticular country. The de-
vice should be connec-
ted according to the details included
in this operating manual. Installation,
connection and control should be car-
riedoutbyaqualiedelectricianstaff,
who act in accordance with the servi-
ce manual and the device functions.
Disassembling of the device is equal
with a loss of guarantee and can cause
electric shock. Before installation make
sure the connection cables are not un-
der voltage. The cruciform head screw-
driver 3,5 mm should be used to instal
the device. Improper transport, stora-
ge,anduseofthedeviceinuenceits
wrong functioning. It is not advisable to
instal the device in the following cases:
if any device part is missing or the de-
vice is damaged or deformed. In case
of improper functioning of the device
contact the producer.
CAUTION

EXAMPLE OF INSTALLATION
ver. 0.4.2 _ 2006.06.20_14:00
MOUNTING
1. Disconnect the power supply from
the mains by the phase fuse, the
circuit-breaker or the switch-discon-
nector that are joined to the proper
circuit,
2. Check if there is no voltage on
connection cables by means of a
special measure equipment,
3. Install LKM-01 device in the
switchboard on TH-35 DIN rail,
4. Connect the cables with the ter-
minals according to installing dia-
gram,
5. Switch on the power supply from
the mains.
CONNECTING
DIMENSIONS
PRODUCT FAMILY
INNER DIAGRAM
FUNCTIONING
Typical use:
LKM-01 power supply indicator signals the voltage presence or it absence on every
phase of a three -phase supply system:
ی L1,L3diodesinONpositionsignalvoltagepresence,
ی L2diodeinOFFpositionsignalsvoltageabsenceonL2phase(fuseisswitched
off).
LKM-01 power supply indicator belongs to
LKM voltage indicators family.
The appropriate LED diode is on
if there is power supply on a particular
phase wire. The LED diode is off if there
is no power supply. For proper device
functioning it is necessary to connect
neutral wire.
L1 L2 L3 N
GUARANTEE CARD
There is 24 months guarantee on the product
Salesman stamp and signature, date of sale
1. ZAMEL provides a two-year warranty for its products.
2. The ZAMEL warranty does not cover:
a) mechanical defects resulting from transport, loading / unloading or other circumstances,
b) defects resulting from incorrect installation or operation of ZAMEL products,
c) defects resulting from any changes made by CUSTOMERS or third parties, to products sold or equipment necessary
for the correct operation of products sold,
d) defects resulting from force majeure or other aleatory events for which ZAMEL is not liable.
3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering
a defect.
4. ZAMEL will review complaints in accordance with existing regulations.
5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL.