Zamel LKM-03 User manual
POWER SUPPLY INDICATOR LKM-03 INSTRUCTION MANUAL
ZAMEL Sp. z o.o.
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamelcet.com, e-mail: [email protected]
VER. 002_19.04.2012
FEATURES
TECHNICAL DATA
DESCRIPTION
APPERANCE
● Single-phasevoltagepresence
optical signalling,
● High-brightnessLEDapplied,
● Highdurabilityopticalindicator
applied,
● VariousLEDcoloursavailable,
● Easyapplicabletogetherwithatypi-
cal systems,
● monomodularcasing,
● TH-35DINrailinstallation.
The LKM-03 power supply indicator is
designed for single-phase system volt-
agesignalling.Voltagepresenceisbeing
signalledbymeansofahigh-brightness
LED. Various LED colour versions are
available(red,green,yellow).
Thedeviceisdesignedfor
three-phaseinstallationand
must be installed in accor-
dancewithstandardsvalid
inaparticularcountry.The
device should be connec-
tedaccordingtothedetails
includedinthisoperatingmanual.Installa-
tion,c on ne ct io nandco ntrolsho uldb ec ar-
riedoutbyaqualiedelectricianstaf f,who
actinaccordancewiththeservicemanual
andthedevicefunctions.Disassembling
ofthedevi ceiseq ualw it halo ssofg uar an -
teeandcancauseelectricshock.Before
installation make sure the connection
cables are not under voltage. The cruci-
formheadscrewdriver3,5mmshouldbe
usedtoinstalthedevice.Impropertrans-
port,storage,anduseofthedeviceinu-
enceitswrongfunctioning.Itisnotadvi-
sabletoinstalthedeviceinthefollowing
cases:ifanydevicepartismissingorthe
device isdamagedordeformed.Incase
ofimproperfunctioningofthedevicecon-
tacttheproducer.
CAUTION
LKM-03
Powerterminals: L, N
Ratedvoltage: 230 V~
Ratedvoltagetolerance: -15 ÷ +10 %
Ratedfrequency: 50/60Hz
Ratedcurrentfor10/20/30versions: 3,5 mA / 15 mA / 15 mA
Powersupplyindicator: LED
Numberofterminalclamps: 2
Sectionofconnectingcables: 0,2 ÷ 2,5 mm2
Ambienttemperaturerange: -20 ÷ +45 oC
Operating position: freely
Mounting: railTH35(PN-EN60715)
Protection degree: IP20 (PN-EN 60529)
Protectionlevel: II
Overvoltagecategory: II
Pollution degree: 2
Dimensions: monomodular (17,5 mm) 90x17,5x66 mm
Weight: 45 g
Reference standards: PN-EN 60947-5-1
Power terminal (N)
Power terminal (L)
Voltage indicator
The symbol means selective
collecting of electrical and electronical
equipment. It is forbidden to put
the used equipment together
with other waste
VER. 002_19.04.2012
MOUNTING, FUNCTIONING
APPLICATION
TIME DIAGRAMS
PRODUCT FAMILY
LKM-03powersupplyindicatorbelongs
toLKMvoltageindicatorsfamily.
1.Disconnectthepowersupplyfrom
themainsbythephasefuse,the
circuit-breaker or the switch-di-
sconnectorthatarejoinedtothe
proper circuit,
2. Check if there is no voltage on
connection cables by means of
a special measure equipment,
3.Install LKM-03 device in the
switchboardonTH-35DINrail,
4.Connect the cables with the ter-
minals according to installing dia-
gram,
5.Switchonthepowersupplyfrom
themains.
The device isreadytowork just
right after its appropriate connec-
ting.TheLEDindicatorsignalsvol-
tagepresenceoftheselectedphase
wire.IncaseofthevoltagelackLED
doesnotlight.
CONNECTING
DIMENSIONS
INNER DIAGRAM
The LKM-03 power supply indicator
signalssingle-phasevoltagepresence.
Deviceversion:
01- three-phasepowersupplywithneutral
wireN
02- three-phasepowersupplywithout
neutralwireN
03- single-phasepowersupplywithneutral
wireN,highbrightnessLED
04- three-phasepowersupplywithneutral
wireN,highbrightnessLEDs
05- three-phasepowersupplywithneutral
wireN,highbrightnessLEDs
Colourversion:
10 - red LED (not applied to LKM-04,
LKM-05)
20 - green LED (not applied to LKM-04,
LKM-05)
30- yellowLED(not applied to LKM-04,
LKM-05)
40- LEDyellow,green,red(not applied
to LKM-03)
Devicesymbol
WARRANTY CARD
Salesman stamp and signature, date of sale
Thereis24monthsguaranteeontheproduct
1. ZAMELprovidesatwo-yearwarrantyforitsproducts.
2. TheZAMELwarrantydoes notcover:a)mechanicaldefectsresultingfromtransport,loading/unloading orothercircumstances
b)defectsresultingfromincorrectinstallationoroperationofZAMELproducts;c)defectsresultingfromanychangesmadebyCUS-
TOMERSorthirdparties,toproductssoldorequipmentnecessaryforthecorrectoperationofproductssold;d)defectsresulting
fromforcemajeureorotheraleatoryeventsforwhichZAMELisnotliable;e)powersupply(batteries)tobeequippedwithadevice
inthemomentofsale(iftheyappear);
3. AllcomplaintsinrelationtothewarrantymustbeprovidedbytheCUSTOMERinwritingtotheretailerafterdiscoveringadefect.;
4. ZAMELwillreviewcomplaintsinaccordancewithexistingregulations.;
5. Thewayacomplaintissettled,e.g.replacementoftheproduct,repairorrefund,islefttothediscretionofZAMEL.
6. Guaranteedoesnotexclude, does not limit,nordoesit suspend the rightsofthe PURCHASER resulting from thediscrepancy
betweenthegoodsandthecontract.
Other Zamel Measuring Instrument manuals
