ZARIFA USA Z-CLOUD User manual

Massage Chair
Z-CLOUD

Massage Chair
Contents
Massage Chair
Contents
02
Our
Loyal Customer
THANK YOU!
Our goal is to provide a graceful living experience
through drug-free pain relief. Our products are made
with the customer in mind. During trying times of an
opioid epidemic, we aim to provide the highest quality
products using modern methods of traditional practices
Meeting our customers and hearing their stories are
what continually drive us each day. Without customer
feedback we would not have the knowledge to be able
to continue to innovate our products and perform the
research our customers need the most. Thanks to all
our customer providing us with their feedback, each of
our medical products have been designed with you in
mind. We pay the utmost care and attention to detail in
order to continue delivering nothing short of the best
medical devices possible. We could not be more excited
for you to join and continue our journey with us towards
stopping cycles of chronic pain in your life.
YAMA MUSTAFAWI / CEO
Thank you for purchasing our Product. Please read the Safety and Operating
Procedures in this User Manual before using the massager. Keep this booklet in a
safe place for future reference.
03
07
08
16
Safety and Maintenance
Parts and Functions
Operating Instructions
Product Specifications

Massage Chair
Safety and maintenance
Massage Chair
Safety and maintenance
03 04
Important Safety Warnings People Not Suitable To Use The Chair
Safety Precautions
People with circulatory problems (such as varicose veins or thrombosis), children,
and those advised not to use a massage chair by their doctor should not use this
chair.
If you have any of the following health conditions, please consult your doctor for
medical advice before using this chair: serious heart problems, serious diabetes,
serious osteoporosis, serious skin conditions, malignant tumor(s), sensory
impairment, pregnancy (or suspected pregnancy) or those who have just given birth,
acute gastrointestinal complaints (gastritis, hepatitis, enteritis), joint dysfunction
such as rheumatism, hammer toe, gout, thecitis (or suspected thecitis), high fever,
spinal abnormalities due to past injury or ailment, curvature of the spine (scoliosis
acute neck sprain (whiplash), or any other medical condition that may contraindicate
usage of this product.
Seek medical advice before using this chair if you have a pacemaker or other
electronic medical device if you have been restricted to bed rest, or if you are
planning to use this chair to treat a specific ailment, to recover from surgery, or for
therapy.
Elderly people and those with weak bones should seek medical advice before using
this chair even if they do not have a specific disease or disorder mentioned above.
Do not use this chair if you have recently consumed alcohol.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Do not put hands or fingers near the massage mechanism or rollers while this
product is running. Touching the mechanism can result in injury from the rollers
squeezing together.
Ensure that the unit is properly grounded before operating.
Do not leave the product unattended. Unplug from outlet when not in use. Do not use
attachments not recommended by the manufacturer.
Use the product only as intended use as described in this operation manual.
The recommended usage time is 20 min. Do not use excessively.
Do not use if chair cover material or leather is broken or damaged.
Do not operate under a blanket or pillow. Excessive heating can occur and cause
fire, electric shock, or injury to persons.
Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
Do not massage any area of the body that is swollen, inflamed, or covered with skin
eruptions.
Do not use this product while sleeping.
Do not stand on or inside of this appliance. Use only while seated.
Do not clean any parts with a wet cloth. Keep moisture away from electric parts.
Do not use if the power cord is damaged.
Do not use the product if it becomes damaged or makes irregular noise.
Do not let children play with the device.
If the cord is damaged contact the manufacturer for recommended replacement.

Massage Chair
Safety and maintenance
Massage Chair
Safety and maintenance
05 06
Maintenance
Environmental Usage
This product is designed and built to be maintenance-free. No periodic lubrication is
required.
No user-serviceable parts inside. To be repaired by manufacture certified technician
only.
If the product is not in use for a long period of time, store appropriately. It's
recommended to cover the chair, tuck the power cord away, and store in an
environment that is dust and moisture free.
Do not store near heat or open flame.
Do not leave exposed to sunlight. This may cause damage or fading to the chair.
Do not store in extreme temperatures. Excessive heat or cold may cause damage to
components.
Clean with a dry cloth and/or vacuum with soft brush extension regularly. If the
product becomes dirty, use a water-based upholstery cleaner only. Treat stains with
spot cleaner with upholstery shampoo or mild detergent foam.
Do not roll on uneven or rough surfaces.
Environmental Usage
Do not use if air openings are blocked or obstructed. Inspect regularly to ensure air
openings are free from debris such as lint, hair, or foreign objects.
Never drop or insert anything into the openings of the chair.
Do not use this product when standing on a damp floor, or when any part of the body
is in con-tact with plumbing or any
Similar ground.
Do not use this product outdoors.
Do not use in moist or in high-temperature areas such as a bathroom.
Do not use it in a heavily dusty or caustic environment.
Use in a well-ventilated environment.
Trouble Shooting
If the controller is not working normally check the cable and plug socket. Ensure
plug is properly plugged in and secure. Check to ensure that the cable is
undamaged.
This product is equipped with a thermal protection device. This is an added safety
feature to protect your product from overheating with usage over the rated operation
time. To cool turn the product off and let it rest for at least 30 min.

04 05
Function
Designed with a set of vertically movable, four wheel driven muted intelligent
massage hands.
Designed with emulation massage methods of shiatsu, kneading, flapping,
knocking, simultaneous kneading and flapping.
Set with the shoulder automatic detection and location.
Set with memory set on function M1 and M2
Manual massage for the upper body with three options, fixed, partial and overall
massage, with five levels of speed adjustable. in the state of flapping, shiatsu and
knocking, the width between the two kneading balls is adjustable with three
Levels: wide, medium and narrow. On partial and fixed point, the massage hands
can move up and down to adjust the massage point accurately.
Air pressure massage function with three modes: full body air pressure, arms
(upper arm set with 4 airbags, arm set with 8 airbags), leg set with 16 airbags,
three intensity optional.
Leg designed with roller massage function at the bottom of foot, two pairs of
papillae on toe root rotating massage; on the arch and heel mastoid skin scraping
massage.
Back heating function: carbon fi ber far infrared heat source.
The footrest use stepless extended to suit for different body heights.
Backrest frame down slides used technology to deviate from the wall by keeping
zero space, reach the maximum space saving.
Leg lifting adjusting, the backrest frame lifting adjusting and automatic lay down
mode adjustment function.
L shape back track fitting curves of the body, can realize the zero gravity when
back down.
Intelligent automatic massage function: express, wholesome, oriental, swedish ,
classic, chiro.
On upper arm has two grades width adjustment function When you adjust to the
last grade, to push into the arm about a gear distance then lose your hand and
arm device will automatically reset, and so on in order to adapt to the different
shoulder breadth of users.
3D stereo sound speaker installed into armrest.
Fast-pair blue tooth to play music.
Easy control key board on right armrest for on/off, decline/recline.
Name and function of components
Function
1
2
3
4
5
8
10
6
15
14
18
20
11
21 22 23
7
16
17
19
9
12
13
1.Head cushion
2.
3.Upper arm air bag components
4.Arm air bag components
5.
6.Seat cushion
7.Leg rest frame
8.Foot rest frame
9.Calf stop sealing plate
10.Back rest pad
11.Armrest decoration
12.Armrest
13.Side cover
14.Back cover
15.Manual controller
16.Drive box cover
17.Safety switch
18.Base caster
19.Power line and power plug
20.Power socket
21.Fuse box
22.Power switch
23Manual controller socket
3D stereo speaker
Easy control key board
Massage Chair
Parts and Functions
Massage Chair
Parts and Functions
07 08
Name and function of components Functions
Intelligent three-dimensional massage hands combine professional massage
experience
Designed to perform the following massage actions: knead, squeeze, flap, press,
push, hold, swing, and twist.
The massager chair has built-in automatic shoulder detection.
6 Different intelligent massage modes: Express, Wholesome, Oriental, Swedish,
Classic, and Chiropractic.
2 programmable memory modes
Configurable manual massage for the upper body with 3 different modes fixed,
partial, and overall massage with 5 levels of adjustable speed. When in flapping,
shiatsu, and knocking modes the width between the two kneading balls is adjustable
with three preset levels: wide, medium, and narrow. In partial and fixed point modes,
the massage hands adjust up and down to find the best position.
Air pressure massage functionality with three modes: full body air pressure, arms,
and legs.
Foot massager with two pairs of rollers. One on the heel and arch, and one that
rotates on the toe area.
Adjustable shoulder massagers: each shoulder and upper arm airbag is
independently adjustable. To adjust the width, pull inward until you hear a click and
release. Continue to pull inward past the 2 settings and release to open back up.
Z-cloud Infrared carbon fiber heat.
Adjustable leg base. The calf portion of the Z-Cloud Massage Chair Stretches an
additional 8 inches to fit a multiple of body types and heights.
The Z-Cloud Massage Chair is designed to take up the least amount of space
possible while receiving a full body massage.
3D Digital Bluetooth Speakers with fast pairing functionality
Quick access embedded controller is included on the armrest.
Zero-G experience, the legs extend 135 ° and the spine stretches along 118° to
create the feeling of weightlessness.
Combo "S" and "L" Shape Track. The Z-Cloud Massage Rollers ergonomically lay
along with the user's upper and lower back
1. Head cushion
2. 3D stereo speaker
3. Upper arm air bag components
4. Arm air bag components
5. Easy controll keyboard
6. Seat cushion
7. Leg rest frame
8. Foot rest frame
9. Calf stop sealing plate
10. Backrest pad
11. Armrest decoration
12. Armrest
13. Side cover
14. Back cover
15. Manual controller
16. Drive box cover
17. Safety switch
18. Base caster
19. Power cable and power plug
20. Power socket
21. Fuse box
22. Power switch
23. Remote socket

3. Choose a massage mode to begin massage
Choose a massage mode to begin massage.
Memory Mode
Press button “ORIENTAL/M1” or “CHIRO/M2” for 3 seconds, this will begin the
memory massage mode previously set.
0706
Method of usage Method of usage
Note: The specific displays referto
the actual object of this product!
1.Switch power supply on
Diagram of plug in Diagram of the switch position of power supply
2.Start to massage
1). Press power button, massage chair automatically reclining, and start massage.
2). Automatic shoulder position and massage acupressure point detection, waiting
for the completion of testing.
3). If there is difference with the massage balls and the actual shoulder position,
youcan adjust the up and down button to a suitable position. Shoulder position
has 10 grades adjustable.It will run automatic massage if there is noadjustment
on shoulder position within 10 seconds
Button Description Display
Move the massage balls upward to a suitable position
Move the massage balls downward to a suitable position
Shoulder
adjust
High shoulder position
suitable shoulder position
Low shoulder position
AUTO MODE
MANUAL
EXPRESS WHOLESOME
ORIENTAL/M1
SWEDISH CLASSIC CHIRO/M2
Menory
Menory
4) Choose massage function to massage
Memory function massage
Function Button Display
Memory
massage
Press button ORIENTAL/ M1 or CHIRO /M2 for 3 seconds, then
enter into memory massage function M1 or M2 , it will revert to the
previous memory massage mode.
ORIENTAL/M1
CHIRO/M2
0706
Method of usage Method of usage
Note: The specific displays referto
the actual object of this product!
1.Switch power supply on
Diagram of plug in Diagram of the switch position of power supply
2.Start to massage
1). Press power button, massage chair automatically reclining, and start massage.
2). Automatic shoulder position and massage acupressure point detection, waiting
for the completion of testing.
3). If there is difference with the massage balls and the actual shoulder position,
youcan adjust the up and down button to a suitable position. Shoulder position
has 10 grades adjustable.It will run automatic massage if there is noadjustment
on shoulder position within 10 seconds
Button Description Display
Move the massage balls upward to a suitable position
Move the massage balls downward to a suitable position
Shoulder
adjust
High shoulder position
suitable shoulder position
Low shoulder position
AUTO MODE
MANUAL
EXPRESS WHOLESOME
ORIENTAL/M1
SWEDISH CLASSIC CHIRO/M2
Menory
Menory
4) Choose massage function to massage
Memory function massage
Function Button Display
Memory
massage
Press button ORIENTAL/ M1 or CHIRO /M2 for 3 seconds, then
enter into memory massage function M1 or M2 , it will revert to the
previous memory massage mode.
ORIENTAL/M1
CHIRO/M2
0706
Method of usage Method of usage
Note: The specific displays referto
the actual object of this product!
1.Switch power supply on
Diagram of plug in Diagram of the switch position of power supply
2.Start to massage
1). Press power button, massage chair automatically reclining, and start massage.
2). Automatic shoulder position and massage acupressure point detection, waiting
for the completion of testing.
3). If there is difference with the massage balls and the actual shoulder position,
youcan adjust the up and down button to a suitable position. Shoulder position
has 10 grades adjustable.It will run automatic massage if there is noadjustment
on shoulder position within 10 seconds
Button Description Display
Move the massage balls upward to a suitable position
Move the massage balls downward to a suitable position
Shoulder
adjust
High shoulder position
suitable shoulder position
Low shoulder position
AUTO MODE
MANUAL
EXPRESS WHOLESOME
ORIENTAL/M1
SWEDISH CLASSIC CHIRO/M2
Menory
Menory
4) Choose massage function to massage
Memory function massage
Function Button Display
Memory
massage
Press button ORIENTAL/ M1 or CHIRO /M2 for 3 seconds, then
enter into memory massage function M1 or M2 , it will revert to the
previous memory massage mode.
ORIENTAL/M1
CHIRO/M2
0706
Method of usage Method of usage
Note: The specific displays referto
the actual object of this product!
1.Switch power supply on
Diagram of plug in Diagram of the switch position of power supply
2.Start to massage
1). Press power button, massage chair automatically reclining, and start massage.
2). Automatic shoulder position and massage acupressure point detection, waiting
for the completion of testing.
3). If there is difference with the massage balls and the actual shoulder position,
youcan adjust the up and down button to a suitable position. Shoulder position
has 10 grades adjustable.It will run automatic massage if there is noadjustment
on shoulder position within 10 seconds
Button Description Display
Move the massage balls upward to a suitable position
Move the massage balls downward to a suitable position
Shoulder
adjust
High shoulder position
suitable shoulder position
Low shoulder position
AUTO MODE
MANUAL
EXPRESS WHOLESOME
ORIENTAL/M1
SWEDISH CLASSIC CHIRO/M2
Menory
Menory
4) Choose massage function to massage
Memory function massage
Function Button Display
Memory
massage
Press button ORIENTAL/ M1 or CHIRO /M2 for 3 seconds, then
enter into memory massage function M1 or M2 , it will revert to the
previous memory massage mode.
ORIENTAL/M1
CHIRO/M2
Massage Chair
Operating Instructions
Massage Chair
Operating Instructions
09 10
Operating Instructions Operating Instructions
Buttons Description On Display
Function Button On Display
Note: Remote pictured may dier
from actual unit.
1. Turn on the power
Plug in the power cable
Switch the power switch to the “on” position
2. Start a massage
1. Press the power button, the massage chair will automatically begin to recline,
and start to massage.
2. The chair will perform a scan for optimal positioning
3. At this point, if you would like to adjust the shoulder positioning you can
adjust up and down to find the perfect position. The remote has 10 built-in
levels. If no adjustment is made on the shoulder position the chair will
automatically begin massage after 10 seconds.
Adjust up to move the massage balls upward to correct position
Adjust up to move the massage balls downward to correct position
Memory
Memory

0908
Air pressure function massage
Massage point adjust (in fixed
point, partial modes you can
adjust the massage position)
Other manual function
Method of usage Method of usage
Function Button Description Display
Back
Stretch
Massage hand
move up
Massage hand
move down
Function Button Description Display
Air pressure
mode
Intensity
Three air pressure modes(full body, arm and leg )
for Lower body
With three grades adjustable
Function Button Description Display
Roller
Heating
Sole roller: sole roller switch, with 3 speed levels
available
Far infrared back heating, has warm feeling when
it start to work 3 minutes later
H0
H1
H2
H3
H4
Fixed position (fixed point) massage back and forth
Small area (partial area) massage back and forth
Overall massage back and forth
Upper body massage back and forth
Lower body massage back and forth
Other manual function
Function Button Description
Calf rise
and drop
Backrest rise
and drop
Auto lay
down mode
Calf rest lifting button, press this button, calf restlifting slowly,
stop when release it
Calf rest decline button, press this button, calf rest decline
slowly, stop when release it
Backrest lifting button, press this button, backrest lifting slowly,
stop when release it
Backrest decline button, press this button, backrest decline
slowly, stop when release it
with three modes circulation function, when press the button,
turn into auto lay downmode.
Auto F0
Auto F1
Auto F2
Auto F3
Auto F4
Auto F5
Function Button Adjust Massage Ball Display
Speed
Width
SPEED
WIDTH
Three Grades Speed Adjustable
Three Grades Widths Adjustable
EXPRESS
WHOLESOME
SWEDISH
CLASSIC
MODE
MASSAGE AREA
MASSAGE AREA
MASSAGE AREA
MASSAGE AREA
MASSAGE AREA
AIR MODE
AIR POWER
FOOT ROLLER
HEAT
Upper body manual massage, lower body manual massage
1)Upper body manual massage
Characterized auto massage
Function Button Description Display
Mode: One button cycle
the five manual massage
modes, kneading, flap,
flap & kneading, shiatsu,
tap, and off.
Knead & flap: Speed
Flap: Speed And Width
Knead: Speed
Shiatsu: Speed And Width
Knock: Speed And Width
Quick fix massage for those who are in the rush.
A full body massage with rolling massage on the
neck area.
Rolling massage on the neck with fast moving
massage on the back.
Kneading massage with scrubbing.
Emphasizes on massage along the spinal area
plus stretching action.
Characterized
auto massage
ORIENTAL/M1
CHIRO/M2
Decline and recline the back rest and foot rest to
enforce lying automatically, and it is auto-cycle
mode, to improve the stretch for waist, meanwhile,
the foot airbag, back mechanism massage waist.
Massage Chair
Operating Instructions
Massage Chair
Operating Instructions
Function Button Massage Ball Adjustment Display
11 12
Function Button Description Display
Function Button Description Display
Function Button Description Display
Function Button Description Display
Function Button Description
Quick Massage mode for a fast massage.
A full body massage with a rolling massage on the neck
area.
Rolling massage on the neck with a fast-moving back
massage.
Stretches lower back, waist, and hips by automatically
cycling back and footrest. Meanwhile massages back
and feet.
Massage with kneading and scrubbing.
Massage targeting along the spine while stretching.
Massage Modes
Upper body manual massages, lower body manual massage
Upper body manual massage
Back Massage Area
Air pressure adjustment
Other Manual Functions
Other Manual Functions
Massage
Modes
Mode: Press the button
to cycle through
massage modes.
Kneading, flap, flap and
kneading, shiatsu, tap,
and off.
Speed Three Levels of adjustment
Three Levels of adjustment
Width
Back
Massage
Area
Calf and Leg
Adjustment
Backrest
Adjustment
Zero Gravity
Mode
Fixed position (fixed point) massage back and forth
Small area (narrow targeting) massage back and forth
Overall massage back and forth
Upper body massage back and froth
Lower body massage back and forth
Three air pressure modes, (full body, arms, and legs)
Adjust foot roller with three available speed levels
Heat Infrared carbon fiber heat. (allow 3 minutes for it to
come up to temperature)
Adjusts leg rest up, press, and hold the button until you reach
the desired level.
Adjusts leg rest down, press, and hold the button until you
reach the desired level.
Adjust the backrest forward, press, and hold the button until
you reach the desired level.
Adjust the backrest backward, press, and hold the button
until you reach the desired level.
Extends legs to 135 ° and spine to 118° to create the feeling
of weightlessness.
With three levels of adjustment
Move position
up
Move position
down
Massage point adjustment (in fixed
point and partial modes you can
adjust the position)

11
10
Set with safety switch in a power supply
box, if there is heavy pressure on power
supply box, then forced stop back lying
function, prevent hurts peoplewhen lying.
Method of usage
Method of usage
3) Cut off the power of the whole machine.
Figure (Switch power off)
Diagram of the switch position of power supply Power switch method map
WARNING
4.Calf installation
Install the rotating shaft incalf fixed axis first, noticed the hole should be aligned, so
that the R shape pin assembly (chart 1)
After calf is connected with the fixed axis aligned, then insert (chart 2)
chart 1 chart 2
Plug R pin, then moved to the other side of the calf, and the plug R pin (chart 3)
Finished (chart 4)
chart3 chart4
When the machine under the working state, with lying and calf rest lifting, you
could not apply gravity on the calf, to prevent the massage chair does harm to
peoplebefore dumping(chart1).
chart2).
Ensure the mechanism hands not in the seat part ,otherwise will cause
uncomfortable in the Buttock when you seating in the chair(
Note
chart1 chart2
Shortcut keys
Button Description
Calf rest lifting button, press this button, calf restlifting slowly,
stop when release it.
Calf rest decline button, press this button, calf rest decline
slowly, stop when release it.
Backrest lifting button, press this button, backrest lifting slowly,
stop when release it.
Backrest decline button, press this button, backrest decline
slowly, stop when release it.
1)Press power button during massage progress, all massage function will be stop
immediately, the backrest and footrest will return to original position automatically,
meanwhile you can set up memory function. After rated working time, all massage
functions will be finished, meanwhile you can set up memory function, but
backrest and footrest won't return to original position.
2)Memory store function: After rated working time or switch off, the hand controller
displays "Memory" and glitter, remind the users whether need to store the
massage mode before turn off, you can press the memory function buttons
M1 or M2 as you like, store the massage mode.
3.Turn off power, stop massage
Pause and run button: to stop massage function you need to press
on/off button, if it stops more than 20 minutes, the massage chair will
shut down all the massage function
11
10
Set with safety switch in a power supply
box, if there is heavy pressure on power
supply box, then forced stop back lying
function, prevent hurts peoplewhen lying.
Method of usage
Method of usage
3) Cut off the power of the whole machine.
Figure (Switch power off)
Diagram of the switch position of power supply Power switch method map
WARNING
4.Calf installation
Install the rotating shaft incalf fixed axis first, noticed the hole should be aligned, so
that the R shape pin assembly (chart 1)
After calf is connected with the fixed axis aligned, then insert (chart 2)
chart 1 chart 2
Plug R pin, then moved to the other side of the calf, and the plug R pin (chart 3)
Finished (chart 4)
chart3 chart4
When the machine under the working state, with lying and calf rest lifting, you
could not apply gravity on the calf, to prevent the massage chair does harm to
peoplebefore dumping(chart1).
chart2).
Ensure the mechanism hands not in the seat part ,otherwise will cause
uncomfortable in the Buttock when you seating in the chair(
Note
chart1 chart2
Shortcut keys
Button Description
Calf rest lifting button, press this button, calf restlifting slowly,
stop when release it.
Calf rest decline button, press this button, calf rest decline
slowly, stop when release it.
Backrest lifting button, press this button, backrest lifting slowly,
stop when release it.
Backrest decline button, press this button, backrest decline
slowly, stop when release it.
1)Press power button during massage progress, all massage function will be stop
immediately, the backrest and footrest will return to original position automatically,
meanwhile you can set up memory function. After rated working time, all massage
functions will be finished, meanwhile you can set up memory function, but
backrest and footrest won't return to original position.
2)Memory store function: After rated working time or switch off, the hand controller
displays "Memory" and glitter, remind the users whether need to store the
massage mode before turn off, you can press the memory function buttons
M1 or M2 as you like, store the massage mode.
3.Turn off power, stop massage
Pause and run button: to stop massage function you need to press
on/off button, if it stops more than 20 minutes, the massage chair will
shut down all the massage function
Leg rest installation
Insert the rotating shaft into the assembly, then adjust to align the pinhole
(chart 1).
After the leg rest is aligned then insert the R-shaped cotter pin.
Repeat this process for the other side and insert the second pin.
Finished (chart 4)
4. Power off, stop massage
To power off the unit during a massage, press the power button. You can also
set the memory function at this time. After a massage mode completes you
can also set a memory function.
Memory Store Function: After auto shut off or the end of a massage sequence
the remote will flash “Memory”. This is a reminder you can store the massage
mode and settings with one of the two memory buttons “M1” or “M2”.
Power off the unit.
Massage Chair
Operating Instructions
Massage Chair
Operating Instructions
13 14
Buttons Description
Pause and run button: to pause a current massage press this
button. If mode remains paused for more than 20 minutes, the
massage chair will turn off automatically.
Adjusts leg rest up
Adjusts leg rest down
Adjust backrest forward
Adjust backrest backward
Shortcut Keys
Do not push down on the footrest this may result in personal injury or damage to the chair.
Do not sit or stand on calf massager.
Ensure massaging hands are lowered before sitting to avoid discomfort.
Note
If pressure is applied to the upper portion of the
massage chair base, the pressure sensor will not
allow the reclining function to work. This will prevent
harm to either the user, children, pets, or the chair
itself during normal use.

12 13
Method of usage
Product specification
Put the heavy massage chairs on the wood floor for a longtime may damage the floor,
so please place a carpet or other object to avoid this damage.
Model: A385
Name: Massage Chair
Rated voltage: 110-120V~ 60Hz
220-240V~ 50Hz/60Hz
Rated power input:150W
Rated time: 20Min
Safety structure: Class
Material introduction: PVC, PA, steel parts and electric &ele
-ctron parts
MATERIAL PU LEATHER CLOTH WOOD
Method of usage
Caution: Do not move the chairs with its wheels on wood floor, rough ground or in
a narrow space. Two people are required to lift the chair. During the lifting period,
take the calf sealing board and backrest cover grooves as the focal point(Please do
not lift armrest Directly.)
7.Method of movement
Make sure that all wires are far above the ground, tilt the backrest backward to
a certain degree (with the gravity center resting on the wheels), push the chair
forward or backward with your hands and finally resume the chair to the normal
position in a slow and gentle manner.
Note:During movement you must turn off the power switch first and then unplug the
power line and hand controller connecting line.
6.Floor Protection
The head pillow with three part (three layers) of Fold-down design. The users can
choice the number of layer to find the best intensity of back massage.
Separate the head pillow to fall down to the back to reduce the intensity of back
massage.
Backrest cushion and backrest connected byzipper (1), head cushion and
backrest pad connected by thread gluing (2)
Zipper Thread gluing
5. Head cushions and backrest pad's dismounting and use manual
Floor Protection
Place on carpet or floor protector to avoid damage to surfaces. The massage chair can do
damage to sensitive surfaces, such as wood flooring.
Caution: Do not move the chair by the wheels on wood flooring, rough ground, or narrow
spaces. Two people are required to lift the massage chair. Prior to moving, remove Footrest
and armrests.
The Head pillow has a three par (three-layer) fold-down design. Choose the number of layers
for the right fit for you.
For a gentler massage separate the Velcro on the headrest to reveal the back pad.
The additional head pillow/backrest portion may also be removed by unzipping (1) and/or
detaching Velcro. (2)
Backrest and Head Pillow Adjustments
Before moving detach or secure the power cable. Tilt the chair by the backrest backward
until well balanced at the center of gravity on the wheels. Push the forward or backward to
the desired location then set the chair down slowly and carefully.
Note: Turn off the power and unplug and detach the power cable before moving.
Moving the Chair
Massage Chair
Operating Instructions
Massage Chair
Product Specifications
15 16
VelcroZipper