
①Press the power switch button for 2s to switch on the main power supply.
At the moment the battery indicator is on, showing the current battery level, the
machine is in standby.
②Press the button again, one light of the gear indicator is on. At the same time,
the massage head begin to move back and forth according to the strength of “1” gear.
③Press the button once again, the slap strength gradually increases,and the number
of gear indicator change from “2” to “5”. Which the highest is 5 gear.
④When it reaches the highest gear, you can press it again to return to level “0”. Then
the massage head stops moving and the machine is in standby. You can press it
again to repeat in the sequence above.
⑤Press the adjustment switch on any gear for more than 2 seconds, when all the
gear indicator are off, the massage head stops moving, and enters standby state.
Show current machine status:
When no display,the machine is in standby
One light is on: The current slap gear is 1 level
Two lights are on: The current slap gear is 2 level
Three lights are on: The current slap gear is 3 level
Four lights are on: The current slap gear is 4 level
Five lights are on: The current slap gear is 5 level
Power and gear adjustment switch button:
Press this button for 2s to switch on the main power supply.
Each time you press it, the gear shifts up one gear
Press it and hold for more than 2s, the machine stops the current
action and returns to the 0-gear standby state.
At the standby state, press it for 2s to switch off the manin power
supply.
Display the current battery level
All four lights are on: the battery is fully charged
Three lights are one: 70% power
Two lights are on: 40% power
Red light are on: Less than 10% power, please chargedin time.
Charging Port:
Insert the Typ-C plug of charging line into the hole,and
then plug the other end into a USB power socket to
charge the machine.
Operation instruction
3