Zimmer Soleo SonoStim User manual

Operating Instructions
Soleoline
Soleo SonoStim, Soleo Galva, Soleo VacoS
GB

Soleo SonoStim / Soleo Galva
Front view of device
Fig. 1
Selection and control elements
1 Intensity controller channel I 5 Screen
2 Intensity controller channel II 6 Touch pen in holder
3 Alligator clip option 7 SD card slot
4 Slot for ultrasound head
Fig. 2
Screen readouts
8 Status ar 10 Title ar
9 Navigation ar 11 Buttons on the screen
1 2
3
4
5
4
7
10
9
11
8
3
6

Fig. 3
Soleo SonoStim / Soleo Galva
Rear view of device
Switch and connector soc ets
12 Connector for mains ca le 16 Socket for electrode ca le channel II
13 Fuse drawer for mains fuse 17 Socket for 0.8/2.4 MHz ultrasound head
14 On/off switch 18 Socket for electrode ca le channel I
15 Socket without function in Soleoline
12
13
15
14
16 17 18

VacoS
Front view of device
Fig. 4
Connector soc ets
Circuit I 1 Connector socket Vaco electrode sleeve, lack, cathode
2 Connector socket Vaco electrode sleeve, red, anode
Circuit II 3 Connector socket Vaco electrode sleeve, lack, cathode
4 Connector socket Vaco electrode sleeve, red, anode
1
2 4
3

VacoS
Rear view of device
Fig. 5
Switch and connector soc ets
5 On/off switch 9 Socket for electrode ca le Channel II
6 Connector for mains connector ca le 10 Socket for connecting ca le with
SonoStim I Galva channel II
7 Connector for mains ca le 11 Socket for electrode ca le channel I
8 Fuse holder for mains fuse 12 Socket for connecting ca le with
SonoStim I Galva channel I
5
6
7 8 9 10 11
12

Soleo SonoStim/Soleo Galva and VacoS
Side view
Fig. 6
13 Connector valve for water separator
13

Contents
Soleo SonoStim / Soleo Galva
Front view of device
Selection and control elements/screen readouts
Rear view of device
Switch and connector sockets
VacoS
Front view of device
Connector sockets
Rear view of device
Switch and connector sockets
Soleo SonoStim / Soleo Galva and VacoS
Side view
Page
1. Soleoline – Summary 1
2. Fitting the cables, starting the system
2.1 Soleo SonoStim / Soleo Galva 2
2.2 VacoS3
3. Configuration
3.1 General 6
3.2 Electrotherapy 12
3.3 Ultrasound therapy 14
3.4 Maintenance 16
4. Soleo SonoStim – Quic operating instructions
4.1 Electrotherapy 17
4.2 Ultrasound therapy 21
4.2.1 Water ath treatment 25
4.3 Com ination therapy 27
5. Soleo Galva – Quic operating instructions 31
6. Soleo SonoStim / Soleo Galva
Quic operating instructions for electrotherapy with VacoS
32
7. General instructions – VacoS/SD card 36

Contents
8. Description of the selection buttons 37
9. Electrotherapy – Screenshots of the various therapy screens 43
10. Electrotherapy
10.1 Description of the screen elements 45
10.2 Description of the parameter utton 47
10.3 Description of the surge utton 49
10.4 Change current form parameters 51
10.5 Change surge parameters 55
10.6 Description of the screen elements and the interference utton 58
11. Ultrasound therapy – Screenshot of the therapy screen 59
12. Ultrasound therapy
12.1 Description of screen elements 60
12.2 Description of the parameter button 63
12.3 Description of the treatment depth button 66
13. Combination therapy – Screenshot of the therapy screen 67
14. Electrotherapy with VacoS – Screenshot of the therapy screen 68
14.1 Description of the screen elements 69
14.2 Changing parameters 70
15. Indications menu 73
16. Saving a modified programme 76
16.1 Favourites 78
16.2 Memory 79
17. Retrieving and editing favourites and memory
17.1 Retrieving favourites 80
17.2 Editing favourites 81
17.3 Retrieving and editing memory 83
18. Sequence programmes 84
19. Paralysis diagnostics and therapy overview 90
19.1 Lange medium frequency test 91
19.2 Neofaradic test 92
19.3 Chronaxia/accommodation quotient 93
19.4 Fischgold test 97

Contents
20. Indications 99
21. Contraindications 103
22. Explanation of symbols 105
23. Warnings 106
24. General technical information
Soleo SonoStim / Soleo Galva
108
25. General technical information – VacoS 109
26. Specific technical Information
26.1 Stimulation current 110
26.2 Ultrasound 111
26.3 VacoS112
27. Cleaning, disinfection 113
28. Electrodes
28.1 Use and care 114
28.2 Information a out the use of various electrode types 115
29. CE Mar ing 117
30. Contents on delivery, accessories
30.1 Soleo SonoStim 118
30.2 Soleo Galva 119
30.3 VacoS120
31. Device combinations 121
32. Safety and maintenance 122
33. Functional test 123
34. Safety chec s 124
35. Error messages, Troubleshooting, Disposal 125
36. Manufacturer's EMC declaration 130
Valid for Soleo SonoStim, Soleo Galva and VacoS devices.
These Operating Instructions are an integral part of the device.
They must e stored with the device and kept accessi le at all times for anyone authorised to operate this
device.
These Operating Instructions are valid from 05.01.2010.

1
Soleoline – Summary
1
What is Soleoline? An ultramodern and innovative range of products with 3 different devices
availa le.
Soleo SonoStim
An ultramodern and innovative com ination device for electrotherapy and
ultrasound therapy with the option of attaching a vacuum unit.
Soleo Galva
An ultramodern and innovative electrotherapy device with the option of
attaching a vacuum unit.
Soleo Sono
An ultramodern and innovative ultrasound therapy device.
Note: The operation of Soleo Sono is described in a separate set of instructions.
What does the
Soleoline do?
Output of monophasic, iphasic and medium frequency currents for nerve
stimulation and muscle therapy for mono channel and dual channel operation
as well as output of therapeutic ultrasound.
What are the
advantages of
Soleoline?
A clear contemporary colour screen showing all parameters necessary for
therapy as well as modern touch control.
Individual programme start configuration and clear, simple menu navigation
make operation of the device easy and comforta le for users.
The com ination of electrotherapy and ultrasound therapy in a single system
ena les the use of the esta lished com ination therapy.
The compact design saves room in the practice and is highly suited for use in
home visits.
The use of the vacuum unit ensures comforta le electrode application and also
provides a pleasant massage effect for patients.
Innovations in
Soleoline?
SonoSwing, the innovation in the field of ultrasound therapy:
• a single ultrasound head with two frequencies 0,8MHz and 2,4 MHz
• freely selecta le penetration depths using percentage adjustment of the
frequency ratios.
Note: The device should only be used by medical specialists (e.g. doctors, therapists
and health paraprofessionals).

2
Fitting the cables
Starting the system
2.1 Soleo SonoStim / Soleo Galva
2
Note: The following description of fitting the cables refers to the operation of Soleo
SonoStim / Soleo Galva without acoS.
Note: There are green arrows on the cables as guides for correct connection with the
device.
Electrotherapy When connecting the electrode ca le ensure that the green arrow is pointing
downwards when eing plugged in.
Plug the electrode ca le for channel I into the appropriate socket (18).
Plug the electrode ca le for channel II into the appropriate socket (16).
Attach the red alligator clip to the red connector on the electrode ca le.
Attach the lack alligator clip to the lack connector on the electrode ca le.
Ultrasound therapy When connecting the ultrasound head ensure that the green arrow is pointing
left when eing plugged in (when standing at the ack of the device).
Connect the ultrasound head to the appropriate socket (17).
Connecting the
mains cable
Plug the mains ca le into the appropriate socket (12) on the device and then
plug into the mains socket.
Switching on the
device
Switch on the device using the rocker switch (14).
Note: All buttons, menus and submenus are activated directly on the screen by
touching it or using the touch pen.

3
Fitting the cables
Starting the system
2.2 VacoS
2
Note: acoS is controlled and operated via Soleo SonoStim/Soleo Galva. Stand-
alone operation is not possible.
Preparation Place Soleo SonoStim / Soleo Galva on VacoS so that the devices are flush on
top of one another. The connector sockets for the Vaco electrode sleeves must
e at the front of the device (Fig. 4).
Connecting VacoS
with SonoStim /
Galva
When fitting the connection ca le ensure that the green arrow is pointing
downwards when connecting the ca le to Soleo SonoStim / Soleo Galva (18).
When fitting the connection ca le ensure that the green arrow is pointing
upwards when connecting the ca le to VacoS (12).
Channel I
Plug the connecting ca le into the appropriate sockets on Soleo SonoStim /
Soleo Galva (18) and on VacoS (12).
Channel II
Plug the connecting ca le into the appropriate sockets on Soleo SonoStim /
Soleo Galva (16) and on VacoS (10).

4
Fitting the cables
Starting the system
2.2 VacoS
2
Note: If Soleo SonoStim / Soleo Galva is operated in connection with acoS, the
electrode cable is connected to acoS. The installation is described below.
Fitting the
electrode cable
Ensure when connecting the electrode ca le to VacoS that the green arrow is
pointing upwards when eing plugged in.
Plug the electrode ca le for channel I into the appropriate socket (11) on
VacoS. Plug the electrode ca le for channel II into the appropriate socket (9)
on VacoS.
Attach the red alligator clip to the red connector on the electrode ca le.
Attach the lack alligator clip to the lack connector on the electrode ca le.
Installation of Vaco
electrode sleeves
Plug the lack Vaco electrode sleeve into the appropriate socket (1) on the
front of VacoS here:
I -
Plug the red Vaco electrode sleeve into the appropriate socket (2) on the front
of VacoS here:
I +
Plug the lack Vaco electrode sleeve into the appropriate socket (3) on the
front of VacoS here:
II -
Plug the red Vaco electrode sleeve into the appropriate socket (4) on the front
of VacoS here:
II +
Plug the Vaco electrodes with the connector on the free end of the Vaco
electrode sleeves.

5
Fitting the cables
Starting the system
2.2 VacoS
2
Fitting the
Vaco electrodes
Connect a Vaco electrode to each of the 4 Vaco electrode sleeves.
Connecting to the
mains
Plug the short mains connecting ca le into the appropriate sockets on VacoS
(6) and Soleo SonoStim / Soleo Galva (12).
Connecting the
mains cable
Plug the mains ca le into the appropriate socket on VacoS (7) and then plug
the ca le into the mains power wall socket.
Switching on VacoSSwitch on VacoS using the rocker switch (5).
Note: Press this icon to activate acoS.
The window is only active if acoS is switched on and the devices are
connected to one another as described.

6
Configuration
3.1 General
3
Note: The following descriptions always refer to therapy using a single channel and
are based on the factory default settings.
Note: Changes to the default settings can only be made from the start screen.
Start screen After switching on the device and the self-test, the start screen opens.
Selecting
configuration Press the utton to open the configuration menu.

7
Configuration
3.1 General
3
Configuration menu In the configuration menu the factory settings can e changed and individually
set. After activation of the configuration menu the ‘Select configuration’ screen
is active.
Saving settings
Press the / utton to save the new
settings.
Quitting the
configuration menu Press the utton to return to the start screen.
General settings
The setting options are outlined elow.
In the factory the default settings are pre-programmed as shown on the
screen.
Language
Press the
arrow key to open the
drop-down menu to select the language.
The language is selected y pressing on the appropriate row.

8
Configuration
3.1 General
3
Start settings Configuration options for the programme start settings:
Press the arrow key to open the
drop-down menu to select the programme start configurations.
The options are selected y pressing on the appropriate row.
Start screen Option to choose etween 2 start screens:
Press the arrow key to open the
drop-down menu to select the start screen.
The start screen is selected y pressing on the appropriate row.

9
Configuration
3.1 General
3
Sound To switch the signal sound on and off when activating the control fields:
Press the arrow key to open the drop-
down menu to switch sound on and off.
The selection is made y pressing on the appropriate row.
Volume Option to adjust the volume in steps from 1 to 4:
Press the arrow key to open the
window to adjust the volume.
The volume is adjusted using oth arrow keys.
Brightness Option to adjust the screen rightness in steps from 0 to 10:
The rightness is adjusted using oth arrow keys.

10
Configuration
3.1 General
3
Screen saver Option to configure the start of the screen saver after 0 to 20 minutes:
The time is selected using oth arrow keys.
Note: While therapy is running the screen saver function is deactivated.
Welcome message Option to configure an individual welcome message.
Activate the Welcome message field
to open the screen key oard to
enter a welcome message.