Zipato ZIPABOX User manual

This guide
describes
how to install,
program and
operate Zipato
smart alarm
system.
How can I
manage all
security issues
with one
easy, intuitive
and efficient
solution?
USER
GUIDE
v1.4
ZIPABOX
CONNECT EVERYTHING

COPYRIGHT
© 2012 Tri plus grupa d.o.o. All Rights Reserved. Copyright by Tri plus grupa d.o.o.
No part of this manual may be reproduced or transmitted in any form without the
expressed, written permission of Tri plus grupa d.o.o.
TRADEMARKS
Zipato and the Zipato logo are registered Trademarks.
All other product names mentioned herein may be trademarks or registered
trademarks of their respective companies.
NOTICE
Although Zipato has attempted to ensure the accuracy of the content of this manual,
it is possible that this document may contain technical inaccuracies, typographical,
or other errors. Zipato assumes no liability for any error in this publication, and
for damages, whether direct, indirect, incidental, and consequential or otherwise,
that may result from such error, including, but not limited to loss of data or profits.
Zipato provides this publication “as is” without warranty of any kind, either express
or implied, including, but not limited to implied warranties of merchantability or
fitness for a particular purpose. The published information in the manual is subject
to change without notice.
Zipato reserves the right to make changes in the product design, layout, and driver
revisions without notification to its users.
IMPORTANT SAFETY INFORMATION
To avoid contact with electrical current:
Never install an Ethernet connection in wet locations unless that connector is
specifically designed for wet locations.
Do not place Ethernet wiring or connections in any conduit, outlet or junction box
containing electrical wiring.
Installation of inside wire may bring you close to electrical wire, conduit, terminals
and other electrical facilities. Extreme caution must be used to avoid electrical
shock from such facilities. Avoid contact with all such facilities.
Ethernet wiring must be at least 2 m from bare power wiring or lightning rods and
associated wires, and at least 15 cm from other wire (antenna wires, doorbell
wires, wires from transformers to neon signs), steam or hot water pipes, and
heating ducts.
ELECTROMAGNETIC COMPATIBILITY
When operated according to manufacturer instructions, the product complies with
all applicable CE harmonised standards from EMC Directive 2004/108/EC and Part
15 of the FCC Rules. The connections conducting HF signals must not be damaged or
altered in any way by the user.
03
ZIPABOX
QUICK INSTALLATION GUIDE02 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

THANK YOU for purchasing Zipabox smart home automation controller. This
guide describes how to install, program and operate your Zipabox. Zipabox makes
every home smart by using advanced technology to hide the complexity of home
networking - delivering a simple smart home. It plugs into any outlet in the home
and automatically talks to all the connected devices in the house, connecting them
to the cloud so that consumers can control them using tablets, smart phones,
computers or TVs— at home or on the go. The Zipabox Gateway supports a variety
of communication standards including Z-WAVE, ZIGBEE, KNX, ONVIF, and UPnP.
The Zipabox’s capabilities can easily be expanded using “snap-in” expansion
modules that will add support for new interfaces and functionalities, communication
standards and protocols, etc.
Once configured, the gateway works stand-alone, but also features cloud support
for advanced monitoring, messaging and programming services.
Intuitive graphical user interface allows customers to program their own home
rules without any previous programming experience.
INTRODUCTION 05
PACKAGE CONTENTS 12
CONNECT THE ZIPABOX 13
ACCOUNT CREATION AND REGISTRATION 15
INSTALLATION/MOUNTING ZIPABOX 18
ADDING DEVICES 20
REMOVING DEVICES 20
TROUBLESHOOTING 21
SPECIFICATIONS 24
LIMITED PRODUCT WARRANTY 26
DECLARATION OF CONFORMITY 32
INTRODUCTIONCONTENTS
05
ZIPABOX
QUICK INSTALLATION GUIDE04 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

SECURITY
AND SAFETY
01
unlimited number of virtual alarms (partitions)
up to 233 two-way, wireless zones
trigger alarms in case of:
intruder (motion sensors and door/window sensors),
fire (smoke sensors),
flood (water leakage sensors),
gas (CO sensors)
panic button,
duress (if someone force you to disarm your system)
health care (in case of missing actions during particular time e.g. motion, door
opening, laying on bed...)
remote arm/disarm and status-info with any smartphone
vandal proof - Zipabox is 24/7 monitored by central station which triggers alarm
in case of connection loss
include arm/disarm commands in automation scenes
integration with existing alarm systems (DSC, Honeywell...)
easy online setup and configuration through web based interface
use of same sensors for security and automation purposes
LIGHTING
02
easy installation of wireless modules
Z-Wave and ZigBee lighting modules pre-configured for even easier setup
support remote dimming and on/off switching with any smartphone
automatically turn lights on at sunset and off at sunrise
unlimited number of scenes supported
turn lights on during emergencies
advanced event based rules configuration
auto-pilot lighting programs to discourage intruders while home is empty
CLIMATE
03
multi-room heating and cooling control with any smartphone
advanced programming scheduler online, accessible over web browser
easily create unlimited number of custom zones (thermostats)
multi-zone humidity control by using standard humidifiers and dehumidifiers
use Internet weather feeds to program your home climate conditions
create advanced event based rules to automate home climate based on other
07
ZIPABOX
QUICK INSTALLATION GUIDE06 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

environmental and home events
include climate control in automation scenes together with alarm, lighting, etc.
Notification and automated actions in case of overtemperature events, power
outages, and other incidents…
SUN
SHADING
04
control blinds, roller-shutters, curtains and pergolas using any smartphone
automate motors by using fun and easy programming
add your sun shading commands into home scenarios together with lights,
climate, alarms...
automate your shades to react to outside weather conditions
easy installation using pre-configured wireless modules
IRRIGATION
05
control unlimited number of irrigation zones
use advanced programming options online to setup perfect irrigation process
automate irrigation system based on Internet weather forecast
integrate your irrigation scheme together with your complete home automation
scenarios
ACCESS
06
remotely lock/unlock your door with any smartphone
remotely open/close your garage door or gate over any smartphone
get video notification when door is open
use RFID tags to open doors and get detailed statistics
automate doors/locks using scenarios and event based programming tool
trigger automation events when door lock user codes are entered
automatically unlock doors in the event of an emergency
MULTIMEDIA
07
remotely control your audio/video equipment with any smartphone
automatically turn on favorite shows when they air and get alerts
automatically turn off A/V equipment at pre-set time or when room is unoccupied
automatically turn on equipment to discourage intruders
09
ZIPABOX
QUICK INSTALLATION GUIDE08 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

VIDEO
MONITORING
08
access live and recorded video via the web and from any smartphone
support for most of the available IP cameras – ONVIF support
get email and SMS notifications with pictures and live video attached
remotely adjust pan-tilt cameras
create advanced event based recording and video notification rules
ENERGY
METERING
09
real-time monitoring energy consumption and notification right on smartphone
compare energy usage and cost with others in the area
automatically turn on/off your appliances in accordance with electricity prices
see detailed analysis of your energy consumption
save energy by automating lights, thermostats, sun shades...
TECHNICAL
SUPPORT
10
HAVING TROUBLE INSTALLING YOUR NEW PRODUCT?
Zipato’s website contains the latest user documentation and software updates for
Zipato products and services.
www.zipato.com
CONTACT SUPPORT
EMAIL: [e-mail]
(Mon-Fri) 9.00am-05.00pm (CET)
11
ZIPABOX
QUICK INSTALLATION GUIDE10 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

CONNECT THE ZIPABOX
Your Serial number is located on the back of the Zipabox, make a note of it as it will
be required when registering your panel online.
CONNECT TO BROADBAND
Connect your Zipabox to your broadband router via the Ethernet cable.
The Ethernet port is located on the top of the Zipabox.
Zipabox queries your DHCP server for an IP address. If you do not have a DHCP
server in your local network, after 60 seconds Zipabox will auto configure itself with
link-local IPv4 address (in 169.254.0.0/16 range).
PACKAGE CONTENTS
01 Serial
number
02 Antenna 1
(865-926MHz)
03 Antenna 2
(optional)
04 Reset
button
05 Ethernet
port
06 Power
input
01 02 03 04 05 06
POWER ADAPTER
230V AC TO
12V DC
ETHERNET
CABLE
865926 MHZ ANTENNA
FOR ZWAVE NETWORK
ZIPABOX
USER
GUIDE
13
ZIPABOX
QUICK INSTALLATION GUIDE12 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

MOUNT ANTENNA
Screw Z-wave antenna to Antenna 1 connector
POWER UP
Plug the power adaptor into mains supply wall socket and the other end into control
unit. You should see following LED sequence:
01 | PLUG IN POWER ADAPTOR: steady yellow light for approximately 60 sec.
02 | STEADY BLUE LIGHT after short purple and yellow light: Linux OS is loading
03 | BLUE LIGHT BLINKING: Java application is loading
04 | ZIPABOX GETTING READY: slowly flashing green light
05 | ZIPABOX READY: steady green light
ACCOUNT CREATION
To benefit from the Zipato monitoring and control service you will need to set up your
Zipato account and register your Zipabox. Upon registration you will automatically
get the basic free level of monitoring service.
Open a browser window on your computer and go to the following URL: my.zipato.com
Click on “Sign Up!” button in the middle of the screen and fill out all required fields
that will popup in the line below the “Sign Up!” button.
Fill out empty fields
Click on “Register”
Take note of your password
during this process.
ACCOUNT CREATION
AND REGISTRATION
01 Button
1
02 Button
2
03 LED
indicator
01 02 03
15
ZIPABOX
QUICK INSTALLATION GUIDE14 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

Once you input registration data and click on register, the following message will
pop up:
“Thank you for signing up!
Please check your e-mail for confirmation message.”
REGISTER YOUR ZIPABOX
When you first time log in to your account, you need to enter serial number of your
Zipabox. Serial number is located on back of your Zipabox.
Enter the serial number located at back of your Zipabox
Serial number must be entered within 2 min. If not, message will appear saying
“Allowed registration time elapsed”. This is done because security precaution. If
this happens restart Zipabox and reenter serial number.
FINALIZE YOUR ACCOUNT
Your account is set up and you are able to use Zipato cloud system. Anyway, you
need to ensure that your account is fully set up so you get the most from your Zipato
account. THIS INCLUDES: Account Details
Make sure that you have fully completed your profile. Go to “General” options on the
left sidebar and select “User details”.
USERS
In the “General” options under the “Users” section is where you add your family
members which will have the rights to use your system. Adding a new user
requires you to enter new user’s details and to give him/her certain rights. Rights
management allows you to permit some services for some users.
When this message appears check your email account. If there is no email please
check spam container.
Email should look like this:
“Hi, your email here, welcome to the Zipabox!
To validate your email address please click on the following link verify.”
Once email is verified, login to Zipato by filing out credentials.
17
ZIPABOX
QUICK INSTALLATION GUIDE16 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

DIN RAIL MOUNTING
Make enough space for Zipabox on your Din-rail. Hook upper fitters on the back of
your Zipabox to the Din rail and press Zipabox slightly to snap lower fitters.
TABLE TOP
You can place your Zipabox on any table top. Just make sure that swivel antenna is
in vertical position.
WALL MOUNTING
Drill holes in the wall surface and insert the wall plugs if fixing into plaster or brick
holes. Drill two holes, fix the screws and hook the Zipabox onto the screw’s heads.
Make sure swivel antenna is in vertical position.
INSTALLATION/
MOUNTING ZIPABOX
01 Holes
for fixing
Zipabox
on screw’s
heads
01
01 Upper
fitters
02 Lower
fitters
01
02
01 Button
1
02 Button
2
03 LED
indicator
01
02
03
19
ZIPABOX
QUICK INSTALLATION GUIDE18 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

ADDING NEW DEVICES ZWAVE OR ZIGBEE
Before adding new device, it is recommended to bring device closer to Zipabox,
so that no obstacle can interfere with operating range of device. Recommended
distance between sensors and Zipabox is less than one meter. Read device
instructions regarding inclusion/join mode. Device in inclusion/join mode is awake
and ready for joining in to Zipato network. Always reset device before adding it to
the network. Reset deletes any information about prior controller that was stored in
device. At the end of joining or removing session it is recommended to synchronize
everything and refresh Zipato Control Center.
01 | On Zipato dashboard, go to the “General” options and in “Device manager” click
“Add new device” button and follow wizard instructions.
02 | After you successfully add the device into your Zipato network go to “General”,
select “Device manager”, click on the Network protocol of this device (e.g. Z-Wave) and
set your device’s room name and type. This will help you to easier control your device.
REMOVING DEVICES
01 | Go to “General” options, select “Device manager”, Network protocol to which
this device belongs (e.g. Z-Wave) and find this device;.
02 | Click on the trash can beside the device and in the popup window confirm deleting
03 | Click on the Synchronize button and refresh the Internet browser.
Waiting for more than a five minutes and still there is no green LED light.
01 | Check your Internet connection
02 | Check whether you connected your network cable correctly to your Internet router.
I forgot my password
01 | Go to my.zipato.com
02 | Click “Forgot password” and follow screen instruction.
I cannot connect any Z-wave or ZigBee device to my box
Check whether your antenna supplied with Zipabox is correctly mounted on Antenna
1 connector.
LED indications on Zipabox
Zipabox can be in various states which can be determined by the following LED
indication:
01 | No lights – Zipabox is not connected to the power supply
02 | Steady blue light (after short purple and yellow light) - Linux OS is loading
03 | Blue light blinking - JAVA application is loading
04 | Green light blinking - Zipabox initiates connecting to the Cloud Server and will
stay in this state if the stable connection cannot be established
ADDING DEVICES TROUBLESHOOTING
21
ZIPABOX
QUICK INSTALLATION GUIDE20 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

05 | Steady green light - Zipabox has a stable connection to the Cloud Server
06 | Red light - alarm is armed, it will change back to steady green light when alarm
is disarmed
07 | Flashing red light - alarm has been tripped
Note: If you do occasionally notice flashing/blinking green light for a few seconds
on the Zipabox during the stable connection to the Cloud Server, please ignore this.
I have placed a device outside my house and it is not communicating with the
Zipabox. What’s happening?
If you have a lot of metal in the exterior construction of your home, this could
significantly impede wireless communication. Metal is an insulator of radio signals. If
your house has metal siding or a stucco finish over a metal mesh, you may have range
problems on devices outside your home communicating with the Zipabox inside.
What should I do if I am having trouble installing my device?
If you are having difficulty with the physical installation of non-Zipato branded
devices (Thermostats, GE switches, Blueline meter reader, etc.), please contact the
manufacturer directly for assistance.
If you are having trouble pairing a device to the Zipabox, check the videos or other
content on Zipato website for assistance.
Error “Validation time expired”
Serial number must be entered within 2 min. If not, message will appear saying
“Allowed registration time elapsed”. This is done because security precaution. Allowed
registration time starts ticking away after Zipabox establishes connection with the
cloud server after power up/reset. So just reset your Zipabox, wait for the light to turn
steady green, and the login into the cloud application and enter the serial number.
I have added device to Zipabox, but is not working properly?
If your device is not working properly try to reinstall it again. Make sure when adding
new device that join procedure is completed. If join procedure is successful you will
get message “Device joined” and Close button will appear.
What happens when adding new device is interrupted?
If device shows up in “Device manager”, in beloging Network protocol, delete it and
then add this device again. If that device is not shown in “Device manager” window
just add this device again.
Do not forget to synchronize
When doing changes with your device like changing endpoint name, configuration or
any change regarding devices and their endpoints, remember to click on synchronize.
Does Zipato offer a warranty?
See the Limited Product Warranty for specifics of the Zipato service warranty.
23
ZIPABOX
QUICK INSTALLATION GUIDE22 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

SYSTEM
ARM9 208MHz CPU
64MB RAM
128MB Flash
NETWORK
Ethernet / Z-Wave / ZigBee (option)
zbzwueg / zbzweuzbeeg - 868.42 MHz
zbzwus / zbzwuszbeeg - 908.42MHz
zbzwru / zbzwruzbeeg - 869.02MHz
zbzwis / zbzwiszbeeg - 916.02MHz
zbzwau / zbzwauzbeeg - 921.42MHz
zbzwin / zbzwinzbeeg - 865.20MHz
OPERATING SYSTEM
Linux 2.6 Kernel
PHYSICAL DIMENSION
86 (L) x 86 (W) x 47 (H) millimeters
3,4(L)x 3,4 (W) x 1,9 (H) inches
ACCESSORIES
CAT5e UTP patch LAN Cable
Antenna Z-wave
Optional antenna for Zipabox Duo:
ZigBee, 433MHz, EnOcean...
POWER
Power input: 9-12VDC
Power supply input: 110-230VAC,
50/60Hz
Power usage: Idle: 1.2W, Max: 2.4W
I/O & LEDS
2 programmable buttons
2 programmable green LEDs
1 programmable RGB LEDs
Power, Status, Ethernet & Z-Wave
AUTOMATION OPTION
Remote automation software
SPECIFICATIONS Online remote control interface
REGULATORY COMPLIANCE
PENDING)
Safety: UL
EMC: FCC, CE
RoHS
ENVIRONMENTAL
Temperature Range:
Operating: 0°C to 40°C (32°F to
104°F)
Storage: -25°C to 70°C (-13°F to
158°F)
Humidity: 5% to 95% noncondensing
WARRANTY
1 year standard
Specifications are subject to change
without prior notice
25
ZIPABOX
QUICK INSTALLATION GUIDE24 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

GENERAL TERMS
Nothing in this Limited Product Warranty affects your statutory rights as a consumer.
The Limited Product Warranty set forth below is given by Tri plus grupa d.o.o.
(Europe) (herein referred to as “ZIPATO”). This Limited Product Warranty is only
effective upon presentation of the proof of purchase. Upon further request by
ZIPATO, this warranty card has to be presented, too.
EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY, ZIPATO MAKES
NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
ZIPATO EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED
WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE
LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD.
TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY
STATEMENT ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES AGAINST
ZIPATO. THEY DO NOT, HOWEVER, AFFECT OR RESTRICT THE RIGHTS YOU
HAVE AGAINST THE BUSINESS YOU BOUGHT A ZIPATO PRODUCT FROM. IN NO
EVENT WILL ZIPATO BE LIABLE FOR LOSS OF DATA OR FOR INDIRECT, SPECIAL,
INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER
DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.
HOWEVER, NOTHING IN THIS AGREEMENT LIMITS ZIPATO’S LIABILITY TO YOU
(I) IN THE EVENT OF DEATH OR PERSONAL INJURY TO THE EXTENT RESULTING
FROM ANY FRAUDULENT MISREPRESENTATION ON THE PART OF ZIPATO, OR (III)
TO THE EXTENT ARISING UNDER PART 1 OF THE CONSUMER PROTECTION ACT
1987 OF THE UNITED KINGDOM. SOME STATES OR COUNTRIES DO NOT ALLOW:
(1) A DISCLAIMER OF IMPLIED WARRANTIES; (2) A LIMITATION ON HOW LONG AN
IMPLIED WARRANTY LASTS OR THE EXCLUSION; OR (3) LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR
COUNTRIES, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY
NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE OR
FROM COUNTRY TO COUNTRY. YOU ARE ADVISED TO CONSULT APPLICABLE STATE
OR COUNTRY LAWS FOR A FULL DETERMINATION OF YOUR RIGHTS.
This Limited Product Warranty applies to ZIPATO branded hardware products
(collectively referred to as “ZIPATO Hardware Products”) sold by ZIPATO (Europe),
its European subsidiaries, affiliates, authorized resellers, or country distributors
(collectively referred to as “ZIPATO Resellers”) with this Limited Product Warranty.
The term “ZIPATO Hardware Product” is limited to the hardware components and all
its internal components including firmware. The term “ZIPATO Hardware Product”
DOES NOT include any software applications or programs.
LIMITED PRODUCT
WARRANTY
27
ZIPABOX
QUICK INSTALLATION GUIDE26 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

GEOGRAPHICAL SCOPE OF THE LIMITED PRODUCT WARRANTY
This Limited Product Warranty is applicable to Hardware Products sold by Zipato
Resellers in all countries listed at the beginning of this document under the heading
“Countries in which this ZIPATO Limited Product Warranty applies”. The Limited
Product Warranty will be honored in any country where ZIPATO or its authorized
service providers offer warranty service subject to the terms and conditions set
forth in this Limited Product Warranty. However, warranty service availability
and response times may vary from country to country and may also be subject to
registration requirements.
LIMITATION OF PRODUCT WARRANTY
ZIPATO warrants that the products described below under normal use are free
from material defects in materials and workmanship during the Limited Product
Warranty Period set forth below (“Limited Product Warranty Period”), if the product
is used and serviced in accordance with the user manual and other documentation
provided to the purchaser at the time of purchase (or as amended from time to time).
ZIPATO does not warrant that the products will operate uninterrupted or error-free
or that all deficiencies, errors, defects or non-conformities will be corrected.
This warranty shall not apply to problems resulting from: (a) unauthorized
alterations or attachments; (b) negligence, abuse or misuse, including failure to
operate the product in accordance with specifications or interface requirements;
(c) improper handling; (d) failure of goods or services not obtained from ZIPATO
or not subject to a then-effective ZIPATO warranty or maintenance agreement; (e)
improper use or storage; or (f) fire, water, acts of God or other catastrophic events.
This warranty shall also not apply to any particular product if any ZIPATO serial
number has been removed or defaced in any way.
ZIPATO IS NOT RESPONSIBLE FOR DAMAGE THAT OCCURS AS A RESULT OF YOUR
FAILURE TO FOLLOW THE INSTRUCTIONS FOR THE ZIPATO HARDWARE PRODUCT.
LIMITED PRODUCT WARRANTY PERIOD
The Limited Product Warranty Period starts on the date of purchase from ZIPATO.
Your dated sales or delivery receipt, showing the date of purchase of the product, is
your proof of the purchase date. You may be required to provide proof of purchase
as a condition of receiving warranty service. You are entitled to warranty service
according to the terms and conditions of this document if a repair to your ZIPATO
branded hardware is required within the Limited Product Warranty Period.
[Other than in respect of products for domestic use (in particular those listed in
the first and last boxes in the table below), this Limited Product Warranty extends
only to the original end user purchaser of this ZIPATO Hardware Product and is not
transferable to anyone who obtains ownership of the ZIPATO Hardware Product
from the original end-user purchaser.
29
ZIPABOX
QUICK INSTALLATION GUIDE28 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

PRODUCT WARRANTY PERIOD TABLE
PRODUCT TYPE Product Warranty Period
ZIPABOX CONTROLLER One (1) year
IMPORTANT: The content of “Product Type” listed above is subject to change; please
refer to the www.zipato.com for latest update.
PERFORMANCE OF THE LIMITED PRODUCT WARRANTY
If a product defect occurs, ZIPATO’s sole obligation shall be to repair or replace
any defective Zipato Hardware Product free of charge provided it is returned to an
Authorized ZIPATO Service Centre during the Limited Warranty Period. Such repair
or replacement will be rendered by ZIPATO at an Authorized ZIPATO Service Centre.
All component parts or hardware products that are replaced under this Limited
Product Warranty become the property of ZIPATO. The replacement part or product
takes on the remaining Limited Warranty Period of the replaced part or product.
The replacement product need not be new or of an identical make, model or part;
ZIPATO may in its discretion replace the defective product (or any part thereof) with
any reconditioned equivalent (or superior) product in all material respects to the
defective product.
WARRANTOR
Tri plus grupa d.o.o.
Banjavciceva 11
10 000 Zagreb
CROATIA
TEL [phone]
FAX [phone]
31
ZIPABOX
QUICK INSTALLATION GUIDE30 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

EN 300 220-2 V2.4.1: 2012
EN 62479:2010
EN 60950-1:2006 + A11:2009 + A12:2011 + A2:2013
PERSON RESPONSIBLE FOR THIS DECLARATION:
Sebastian Popovic, CEO
Changes or modifications not expressly approved Tri plus grupa d.o.o. for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: Changes or modifications not expressly approved by Zipato for compliance
could void the user’s authority to operate the equipment. This equipment has been
tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
The manufacturer Tri plus grupa d.o.o declares under our sole responsibility that
the product:
Marketing model: Zipabox
Regulatory model: zb.zweu.g
Trade/Brand name: Zipato
is in conformity with the Low Voltage Directive 2006/95/EC, EMC Directive 2004/108/
EC and R&TTE Directive 1995/5/EC and carries the CE marking accordingly.
The following harmonized standards were applied:
EN 301 489-1 V1.9.2:2012
EN 301 489-3: V1.6.1:2013
EN 301 489-17: V2.2.1:2012
EN 300 328: V1.9.1:2015
DECLARATION OF
CONFORMITY
33
ZIPABOX
QUICK INSTALLATION GUIDE32 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
DISPOSING AND RECYCLING YOUR PRODUCT
This symbol on the product or packaging means that according to local laws and
regulations needs to be disposed of separately from household waste and sent to
recycling because it contains electronic components. Once this product has reached
the end of its life, please take it to a collection point (recycle facilites) designated
by your local authorities, some will accept your product for free or simply drop
it off at your Zipato re-seller store. By recycling the product and its packaging in
this manner you help to conserve the environment and protect human health. At
Zipato, we understand and are committed to reducing any impact our operations and
products may have on the environment. To minimize this impact Zipato designs and
builds its products to be as environmentally friendly as possible, by using recyclable,
low toxic materials in both products and packaging.
35
ZIPABOX
QUICK INSTALLATION GUIDE34 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com

PB
ZIPABOX
QUICK INSTALLATION GUIDE36 ZIPABOX QUICK INSTALLATION GUIDE www.zipato.comwww.zipato.com
make your home smart
www.zipato.com