ZKTeco Green Label ProBio User manual

Contents 1
USER MANUAL
ProBio & ProFAC
Version: 1.2
Date: June, 2016

About This Manual
This manual introduces the operation of user interfaces and menu
functions of the facial Access Control terminal.
The pictures in this manual may not be exactly consistent with those of
your product; the actual product's display shall prevail.
Not all the devices have the function with , the real product prevails.

Contents I
Contents
1 Guidance Notes........................................................................................................................................................... 1
1.1 Operating Environment of the Device .................................................................................................. 1
1.2 Method of Pressing Fingerprint......................................................................................................... 1
1.3 Cautions for Using Face Recognition Device...................................................................................... 2
1.4 Verification Modes ........................................................................................................................................ 3
1.4.1 1:N Fingerprint Verification .......................................................................................................... 3
1.4.2 1:1 Fingerprint Verification........................................................................................................... 4
1.4.3 Password Verification ..................................................................................................................... 4
1.4.4 1:N Face Verification Attendance............................................................................................... 5
1.4.5 1:1 Face Verification Attendance................................................................................................ 5
1.4.6 Card Verification ............................................................................................................................... 6
1.5 Initial Interface................................................................................................................................................ 7
2 Main Menu .................................................................................................................................................................... 8
3 Date / Time Settings .................................................................................................................................................. 9
4 User Management....................................................................................................................................................10
4.1 Adding a User ...............................................................................................................................................10
4.2 Setting Access Control...............................................................................................................................11
4.3 Searching User..............................................................................................................................................11
4.4 Editing a User................................................................................................................................................12
4.5 Deleting a User.............................................................................................................................................13
4.6 User Display Style ........................................................................................................................................14
5 User Role ......................................................................................................................................................................15
5.1 Enabling User Role ......................................................................................................................................15
5.2 Rights Allocation..........................................................................................................................................15
6 Comm. Settings.........................................................................................................................................................16
6.1 Ethernet Settings.........................................................................................................................................16
6.2 Serial Comm. Settings................................................................................................................................16
6.3 PC Connection..............................................................................................................................................17
6.4 ADMS Settings..............................................................................................................................................18
6.5 Wiegand Setup.............................................................................................................................................19
6.5.1 Wiegand Input.................................................................................................................................19
6.5.2 Wiegand Output.............................................................................................................................21
6.5.3 Card Format Detect Automatically..........................................................................................22
7 System Settings.........................................................................................................................................................24
7.1 Access Logs Settings ..................................................................................................................................24
7.2 Face Parameters...........................................................................................................................................25
7.3 Fingerprint Parameters .............................................................................................................................26
7.4 Reset to Factory Settings..........................................................................................................................26
7.5 USB Upgrade.................................................................................................................................................28
8 Personalization Settings.........................................................................................................................................29

II Contents
8.1 User Interface Settings ..............................................................................................................................29
8.2 Voice Settings ...............................................................................................................................................30
8.3 Bell Settings...................................................................................................................................................30
8.3.1 Adding a New Bell..........................................................................................................................30
8.3.2 Editing a Bell.....................................................................................................................................31
8.3.3 Deleting a Bell..................................................................................................................................31
9 Data Management ...................................................................................................................................................32
9.1 Deleting Data................................................................................................................................................32
9.2 Data Backup...................................................................................................................................................33
9.3 Data Restoration ..........................................................................................................................................34
10 Access Control.........................................................................................................................................................35
10.1 Access Control Settings ..........................................................................................................................35
10.2 Time Rule Settings....................................................................................................................................37
10.3 Holiday Settings ........................................................................................................................................39
10.3.1 Adding a Holiday .........................................................................................................................39
10.3.2 All Holidays.....................................................................................................................................40
10.4 Combined Verification Settings...........................................................................................................40
10.5 Anti-passback Settings............................................................................................................................43
11 USB Manager ...........................................................................................................................................................44
11.1 USB Download ...........................................................................................................................................44
11.2 USB Upload .................................................................................................................................................44
12 Records Search........................................................................................................................................................46
12.1 Searching Access Records .....................................................................................................................46
12.2 Searching Attendance Photo ...............................................................................................................47
12.3 Searching Blacklist ATT Photo..............................................................................................................47
13 Autotest .....................................................................................................................................................................48
14 System Information...............................................................................................................................................49
15 Troubleshooting.....................................................................................................................................................50
16 Appendices...............................................................................................................................................................51
16.1 Photo ID Function.....................................................................................................................................51
16.2 Wiegand Introduction.............................................................................................................................51
16.2.1 Wiegand 26 Introduction..........................................................................................................52
16.2.2 Wiegand 34 Introduction..........................................................................................................53
16.3 Image Uploading Rule ............................................................................................................................55
16.4 Anti-passback Settings............................................................................................................................56
16.5 Statement on Human Rights and Privacy........................................................................................59
16.6 Environment-Friendly Use Description ............................................................................................60

ProBio & ProFAC User Manual 1
1 Guidance Notes
1.1 Operating Environment of the Device
1) Recommended Installation Position:
2) Several Installation Positions Affecting Application Effect:
NOTE: Reference illuminance value of the ambient light source is 0~800 LUX.
1.2 Method of Pressing Fingerprint
It is recommended to use the index finger, middle finger or ring finger; avoid using the thumb or
little finger.
1. Correct way to press the fingerprint:
2. Wrong ways to press the fingerprint:
10 Lux
La
rger than 1200 Lux 50-800 Lux
Direct sunlight
(Outdoor)
Exposure to close range
lamp light (Indoor)
Direct sunlight through the
window (Indoor)
Oblique sunlight through
the window (Indoor)
√ Recommended installation position (as shown in the
left figure):
Install the device in an indoor position which is three
meters far from the window and door
,
and two meters far
from the lamp source, with illuminance of ambient light
source being 0~800
LUX.
Press the finger horizontally onto the fingerprint sensor; the center
of the fingerprint should be placed on that of the sensor.
Sides
Vertical

2 ProBio & ProFAC User Manual
1.3 Cautions for Using Face Recognition Device
1. Recommended Standing Position
Recommended Registration and Verification Position
Factors Affecting the Preciseness of Verification
Recommended Procedure
s (as shown in the right image):
During registration and verification procedures, the position
of device should not be changed to prevent deduction in
verification preciseness. If it is
necessary to move the device,
its vertical height should not be changed.
For user heights between 1
.5m to 1.8m
, it is recommended
to install the device at 1
.15m above ground (ma
y be modified
according to user average height)
.
Slanted
Too Low
Please use the correct method of pressing fingerprint for registration and verification. Our
company does not undertake the respo
nsibility for the lowered verification performance
caused by user’s improper operation. The rights to final interpretation and amendment are
reserved.
Non-
identical registration and
verification heights
Non-
identical registration and
verification gestures
Non-ide
ntical registration and
verification distances from device
Non-
identical registration and
verification distances from device

ProBio & ProFAC User Manual 3
2. Facial Expression and Stance
NOTE:During enrollment and verification, keep the facial expression and stance natural.
3. Registration and Verification
a. During registration, it is required to adjust your upper body to fit your eyes into the green frame on
the screen.
b. During verification, it is required to show your face in the center of the screen and fit your face into
the green frame in the screen.
1.4 Verification Modes
1.4.1 1:N Fingerprint Verification
In 1:N fingerprint verification method, a fingerprint collected by the sensor is verified with all fingerprints
stored in the device.
Note: Please use the correct way to press fingerprint onto the fingerprint sensor (for detailed instruction,
please refer to 1.2 Method of Pressing Fingerprint .

4 ProBio & ProFAC User Manual
Successfully verified Verification Fails
1.4.2 1:1 Fingerprint Verification
Under this fingerprint verification method, a fingerprint collected by the sensor is verified with the
fingerprint corresponding to the entered user ID. Please use this method when difficulty is encountered
in 1:N fingerprint verification.
Press to Input the user ID
and press fingerprint
Successfully verified Failed to verify
NOTES:
When the device displays “please press your finger again”, press your finger again onto the fingerprint
sensor. If verification still fails after 2 attempts, it will return to the initial interface.
1.4.3 Password Verification
in this verification method, the entered password is verified with the password of the entered user ID.

ProBio & ProFAC User Manual 5
Press to enter user ID Press the key icon to
enter the password
Successfully verified Failed to verify
1.4.4 1:N Face Verification Attendance
In this method, the facial image captured by the camera is compared with all facial data in the device.
Conduct comparison in the correct
way on the main interface
Successfully verified
1.4.5 1:1 Face Verification Attendance
In this method, the captured facial image is compared with the facial image associated with the entered
user ID.
Press
to enter the
user ID
Press facial icon Compare the faces in the
right way
Successfully verified

6 ProBio & ProFAC User Manual
1.4.6 Card Verification
NOTE: Card function is optional, only products with a built-in card module are equipped with card
verification function. Please contact our technical support as required.
1. Swipe the card above the card reader (the card must be registered)
2. Verification succeeds
3. Verification fails

ProBio & ProFAC User Manual 7
1.5 Initial Interface
1. Date and Time: The current date of the device is displayed.
2. Bell: An alarm is set for the device if this icon is displayed.
3. Network Connection: The network connection status of the device is displayed.
4. Tamper Alarm: The tamper alarm button is up if this icon is displayed, and the possible cause is
"improper installation" or "illegal disassembly".
5. Auxiliary Input: This icon is displayed when the auxiliary input terminal of the device is connected
to an auxiliary device and the auxiliary input condition is triggered.
6. Time: The current time of the device is displayed. The 12-hour and 24-hour are supported. Users
may customize the style of the main interface. For details, refer 8 Personalize Settings.
7. Menu: Press this icon to enter the main menu. If administrators are set for the device, you should
pass the administrator verification before accessing the main menu.
8. 1:1 Verification (soft keyboard): Press the key to enter the interface for inputting a user ID in 1:1
verification mode. After inputting a user ID, press [OK] and continue the 1:1 verification according to
prompts on the interface.
1. Date and Time
2. Network Connection
3. Bell
4. Tamper Alarm
5. Auxillary Input
6. Time
7. Menu
8. 1:1 Verification mode

8 ProBio & ProFAC User Manual
2 Main Menu
User Mgt.: To manage basic information of registered users, including user ID, user name, user role,
fingerprint, face, badge (ID and RFID S50/S70 IC Card (13.56 MHz) are optional), password, user
photo and access control role.
User Role: To set user roles for accessing into the menu and changing settings.
Comm.: To set the related parameters for enabling communication between the device and PC,
including Ethernet parameters such as IP address etc., serial Comm, PC connection, ADMS and Wiegand
settings.
System: To set related parameters of the system and upgrade firmware, including setting date & time,
access logs, face parameters, fingerprint parameters and resetting to factory settings.
Personalize:This includes interface display, voice and bell settings.
Data Mgt.: To delete data including access records, admin role, screen savers and so on, to backup and
restore data.delete access records, delete all data, delete admin role, delete screen savers and so on, to
backup, restore data.
Access Control: To set the parameters of the control lock and access control devices, including
parameters of access control, time rules, holidays, combined verification and anti-passback.
USB Manager: To transfer data such as user data and access records from the USB disk to the
supporting software or other devices.
Attendance Search: To search for the records stored in the device after successful verification.
Autotest: To automatically test different module’s functions, including the LCD, voice, fingerprint sensor,
camera and clock RTC test.
System Info: To check device capacity, device and firmware information.

ProBio & ProFAC User Manual 9
3 Date / Time Settings
In the initial interface, press > System > Date Time to enter the date/time setting interface. It
includes setting date, time, 24-hour clock / 12-hour clock, date format and daylight saving time.
When resetting to factory settings, the date format can be restored (YYYY-MM-DD).
NOTE: When resetting to factory settings, the device’s date/time will not be restored (if the
date/time is set to 18:30 on January 1, 2020, after settings are reset, the date/time will stay at 18:30 on
January 1, 2020.

10 ProBio & ProFAC User Manual
4 User Management
4.1 Adding a User
Including adding super admin and normal user to user roles.
In the initial interface, press > User Mgt. > New User to enter New User setting interface. Settings
include inputting User ID, name, choosing User Role (Normal User / Super Admin), registering
Fingerprint, face and badge number (ID and RFID S50/S70 IC Card (13.56 MHz) are optional), setting
Password, taking User Photo and setting access control role.
Add a Super Admin: Choose “Super Admin” in [User Role], who is allowed to operate all the functions
on the menu.
As shown below, the user with User ID 1 is a super admin:
Add a Normal User: Choose “Normal User” in [User Role]. When the Super Admin is set, Normal Users
can only use fingerprint, password or cardfor verification; when the Super Admin is not yet set,
Normal Users can operate all functions on the menu.
Password: 1 to 8 digits of password is accepted.
NOTES:
1. The device automatically allocates user ID for users in sequence, but user can set it manually as well.
2. The device supports user ID ranged from 1 to 9 digits.

ProBio & ProFAC User Manual 11
4.2 Setting Access Control
User access control option is to set open door access aimed at everybody, including access group
setting, using time period, duress fingerprint management.
Access group: To allocate users to different access control groups for management. By default, new
users belong to Group 1 and can be reallocate to other groups. A valid group number ranges from 1 to
99.
Time Period: Select time rules for the user. Time rules are set under the Access Control menu and a
maximum of 50 time rules are supported. The effective door opening time period of the user is the sum
of the selected time rules.
Duress Fingerprint: User can choose one or more registered fingerprint(s) as Duress Fingerprint. When
that fingerprint is verified, duress alarm will be triggered.
Example: Among those registered fingerprints (6, 7, 8), choose the 7th fingerprint as the duress
fingerprint.
4.3 Searching User
Enter user ID on the [All Users] List to search for a user.

12 ProBio & ProFAC User Manual
In the initial interface, press >User Mgt. > All Users to enter All Usersinterface. Input “User ID” in
, the corresponding user will be shown. The above figure shows the search interfaces of an user
with user ID “1”.
4.4 Editing a User
After a user is chosen through 4.3 Searching User, press and [Edit] to enter user editing interface.
Or in the initial interface press > User Mgt. > All Users > search a user > press > Edit to enter
User Editing interface.
The operation method of editing user is the same with that of adding user, but the user ID cannot be
edited.

ProBio & ProFAC User Manual 13
4.5 Deleting a User
After a user is chosen through 4.3 Searching User, press [M/OK] and Press [Delete] to enter user
deleting interface.
Or in the initial interface press > User Mgt. > All Users > Search a user > Delete to enter user
deleting interface. Select user information to be deleted or delete the whole user.
NOTE: The corresponding to-be-deleted item will be displayed only when the user has registered
fingerprint, password, badgeand user photo.

14 ProBio & ProFAC User Manual
4.6 User Display Style
In the initial interface, press >User Mgt. > Display Style to enter Display Style setting interface.
Several Display Styles are shown as below:
Single Line Style Multiple Line Mixed Line