ZKTeco ZKBio810 Series User manual

USER MANUAL
ZKBio810 Series
Version 1.0
Date: December, 2018

Important Claim
Firstly, thank you for purchasing this hybrid-bio terminal. Before using, please read this manual
carefully to avoid the unnecessary damage! The company reminds you that the proper use will
improve the use affect and authentication speed.
No written consent from our company, any unit, or individual isn’t allowed to excerpt, copy the
content of this manual in part or in full, also spread in any form.
The product described in the manual maybe includes the software which copyrights are shared by
the licensors including our company. Except for the permission of the relevant holder, any person
can’t copy, distribute, revise, modify, extract, decompile, disassemble, decrypt, reverse
engineering, leasing, transfer, sub-license the software, other acts of copyright infringement, but
the limitations applied to the law is excluded.

Copyrights
ⒸCopyright 2017 ZKTeco Co. Ltd. All rights reserved.
All rights reserved. Except as specifically permitted herein, no portion of the information in this
document may be reproduced in any form or by any means without the prior written permission
from ZKTeco.
Due to the constant renewal of products, the company cannot undertake the actual product in
consistence with the information in the document, also any dispute caused by the difference between
the actual technical parameters and the information in this document. Please forgive any change
without notice.

Safety Instructions
1. Read these instructions carefully. Keep these instructions for future reference.
2. Please disconnect this equipment fromAC outlet before cleaning. Don’t use liquid or sprayed
detergent for cleaning. Use moisture sheet or cloth for cleaning.
3. Please keep this equipment from humidity.
4. Lay this equipment on a reliable surface when install.A drop or fall could cause injury.
5. Make sure power cord such a way that people cannot step on it. Do not place anything over
the power cord.
6. All cautions and warnings on the equipment should be noted.
7. If the equipment is not used for long time, disconnect the equipment from main to avoid being
damaged by transient over voltage.
8. Never pour any liquid into opening; this could cause fire or electrical shock.
9. If one of the following situations arises, get the equipment checked by a service personnel:
10. The power cord or plug is damaged.
11. Liquid has penetrated into the equipment.
12. The equipment has been exposed to moisture.
13. The equipment does not work well or you cannot get it work according to user manual.
14. The equipment has dropped and damaged.
15. Do not leave this equipment in an environment unconditioned, storage temperature below
-20°C or above 60°C, it may damage the equipment.
16. Unplug the power cord when doing any service or adding optional kits.
Lithium Battery Caution:
1. Danger of explosion can happen if the battery is incorrectly replaced. Replace only the
original or equivalent type recommended by the manufacture. Dispose used batteries
according to the manufacturer’s instructions.
2. Do not remove the cover, and ensure no user serviceable components are inside. Take the
unit to the service center for service and repair.

Table of Contents
1. Packing List.......................................................................................................... 1
1.1. Standard Accessories ........................................................................................................ 1
1.2 Optional Accessories .......................................................................................................... 1
2. System View......................................................................................................... 3
2.1. Rear View...........................................................................................................................3
2.2. Back View...........................................................................................................................3
2.3. Specification.......................................................................................................................4
2.4. Internal Layout ...................................................................................................................5
3. Pin Definition........................................................................................................ 6
3.1. LVDS connector Pin Definition........................................................................................... 6
3.2. DC Jack Pin Definition....................................................................................................... 6
3.3. COM connector Pin Definition ........................................................................................... 6
3.4. SATA: 22-pin SATA Pin Definition...................................................................................... 7
3.5. Mini-PCIE Pin Definition.....................................................................................................7
3.6. Int. Speaker Pin Definition .................................................................................................8
3.7. Power On/Off connector Pin Definition.............................................................................. 8
4. Rear I/O Interface................................................................................................. 9
4.1. 2-Layer USB2.0 connector Pin Definition.......................................................................... 9
4.2. 2-Layer USB3.0+2.0 connector Pin Definition................................................................... 9
4.3. LAN: RJ45 Pin Definition ................................................................................................... 9
4.4. LINE-OUT JACK Pin Definition........................................................................................ 10
5. LCD Surface Cleaning.........................................................................................11

ZK810 Series User Manual
1
1. Packing List
1.1. Standard Accessories
a. b. a. System (with stand)
b. PowerAdapter
c. Power Cord
d. Driver Bank
c. d.
1.2 Optional Accessories
a.
b.
c.

ZK810 Series User Manual
2
d. e f.
g.
a. Single MSR
b. VFD
c. 8” or 10.4” 2nd Display
d. 1D or 2D Attached Type Barcode Scanner
e. 1D or 2D Handheld Type Barcode Scanner
f. Thermal Printer
g. Cash Drawer

ZK810 Series User Manual
3
2. System View
2.1. Rear View
2.2. Back View
☆Please make sure 12V DC plug in the right direction before plugging in DC jack.
VFD&LCD Cover/10” 2nd (optional)
MSR/i-Button/RFID
(optional)
HDD Cover
1D or 2D Attached
Type Barcode Scanner

ZK810 Series User Manual
4
2.3. Specification
Display & Touch
LCD Display Size 15" TFT LCD
Max. Resolution 1024x768
Brightness 250 cd/㎡
Support Color 16.2M/ 262K colors
Backlight LED
Touch Type Five-WireAnalog Resistive or Projected Capacitive
Main Board
Processor Intel® Celeron J1900 QC 2.0GHz
System Memory One SO-DIMM socket supports DDR3L 1333 up to
8GB
Storage HDD 2.5” SATAII HDD x 1
I/O
USB X 3 (USB 2.0)
X 1 (USB 3.0)
Powered COM X 2 (D-type 9 pins powered COM with DC 5V/ 12V
selection)
Cash Drawer Port X 1 (12V/24V RJ11 cash drawer port)
Audio Port x 1 Line-out
Network LAN X 1 (RJ45 10/100/1000 Base-T)
Peripherals
VFD / 8" & 10.4" Attached second display / MSR/
RFID /
i-Button / 1D/2D Barcode scanner
Environmental Temperature Operation
32° to 104° F (0° to 40° C)
Storage -4° to 140° F (-20° to 60° C)
Relative Humidity 20% to 80% non-condensing
Power Supply 60W or 90W power adapter
OS Support POS Ready 7 / Win 8.1 Industry / Win 10 IoT
Enterprise
Dimension 371(W) x 351(H) x 207(D) mm
Compliance Certifications CE / FCC / LVD
Protection IP64 on front bezel
Note: Intel® Celeron J1900 CPU does not support POS Ready 2009

ZK810 Series User Manual
5
2.4. Internal Layout
M/B PCBA

ZK810 Series User Manual
6
3. Pin Definition
3.1. LVDS connector Pin Definition
No. Definition No. Definition No. Definition No. Definition
1 VCC 2 VCC 21 ADO2+ 22 BDO2+
3 GND 4 GND 23 GND 24 GND
5 VCC 6 VCC 25 ACLK- 26 BCLK-
7 ADO 0- 8 BDO 0- 27 ACLK+ 28 BCLK+
9 ADO 0+ 10 BDO 0+ 29 GND 30 GND
11 GND 12 GND 31 NC 32 NC
13 ADO1- 14 BDO1- 33 GND 34 GND
15 ADO1+ 16 BDO1+ 35 AD03- 36 BD03-
17 GND 18 GND 37 ADO3+ 38 BDO3+
19 ADO2- 20 BDO2- 39 NC 40 NC
3.2. DC Jack Pin Definition
No. Definition
1 +12V
2 Ground
3.3. COM connector Pin Definition
No. Definition
1 NC
2 SIN
3 SOUT
4 NC
5 GND
6 NC
7 RTS
8 CTS#
9 +5V/+12V/Ring

ZK810 Series User Manual
7
3.4. SATA: 22-pin SATA Pin Definition
No. Definition No. Definition
S1 GND P1 N/C
S2 SATA_TX0_P P2 N/C
S3 SATA_TX0_N P3 N/C
S4 GND P4 GND
S5 SATA_RX0_N P5 GND
S6 SATA_RX0_P P6 GND
S7 GND P7 +5V
P8 +5V
P9 +5V
P10 GND
P11 GND
P12 GND
P13 N/C
P14 N/C
P15 N/C
3.5. Mini-PCIE Pin Definition
No. Definition No. Definition
1 WAKE# 29 GND
2 +V3.3V 30 SMB__CLK
3 N/C 31 PCIE_TX_N
4 GND 32 SMB_DATA
5 N/C 33 PCIE_TX_P
6 +1.5V 34 GND
7 CLKREQ# 35 GND
8 N/C 36 USB D-
9 GND 37 N/C
10 N/C 38 USB D+
11 CLK_PCIE_N 39 N/C
12 N/C 40 GND
13 CLK_PCIE_P 41 N/C
14 N/C 42 N/C

ZK810 Series User Manual
8
15 GND 43 N/C
16 N/C 44 N/C
17 N/C 45 N/C
18 GND 46 N/C
19 N/C 47 N/C
20 W_DISABLE# 48 +V1.5V
21 GND 49 N/C
22 RESET# 50 GND
23 PCIE_RX_N 51 N/C
24 +3.3V_AUX 52 +V3.3V
25 PCIE_RX_P 53 GND
26 GND 54 GND
27 GND 55 GND
28 +V1.5V 56 GND
3.6. Int. Speaker Pin Definition
No. Definition
1 Left Out +
2 Left Out -
3 Right Out-
4 Right Out+
3.7. Power On/Off connector Pin Definition
No. Definition
1 +5V Standby
2 +5V Status
3 Power On#
4 GND

ZK810 Series User Manual
9
4. Rear I/O Interface
4.1. 2-Layer USB2.0 connector Pin Definition
No. Definition No. Definition
1 +5V 5 +5v
2 D- 6 D-
3 D+ 7 D+
4 GND 8 GND
4.2. 2-Layer USB3.0+2.0 connector Pin Definition
No. Definition No. Definition
1 +5V 8 TX-
2 D- 9 TX+
3 D+ 10 +5V
4 GND 11 D-
5 RX- 12 D+
6 RX+ 13 GND
7 GND
4.3. LAN: RJ45 Pin Definition
No. Definition
1 MDI0A+
2 MDI0A-
3 MDI1A+
4 MDI1A-
5 MDI2A+
6 MDI2A-
7 MDI3A+
8 MDI3A-

ZK810 Series User Manual
10
4.4. LINE-OUT JACK Pin Definition
No. Definition
1 GND_AUD
2 GND_AUD
3 LINE_OUTR2
4 LINE_OUTL2
5 LINE2-JD

ZK810 Series User Manual
11
5. LCD Surface Cleaning
1. How to clean the LCD surface properly?
Do not spray any liquids on the LCD screen directly, and do not use paper towels,
this can cause the LCD screen to become scratched.
Always apply the solution to your cloth first, not directly to the parts you are cleaning.
You want to avoid dripping the solution directly into your computer or laptop.
Stroke the cloth across the display in one direction, moving from the top of the
display to the bottom.
2. What are some of the basic supplies needed to clean an LCD screen?
Asoft cotton cloth. When cleaning the LCD screen it is important to use a soft cotton
cloth, rather than an old rag. Some materials, such as paper towels, could cause
scratches and damage the LCD screen.
Solution of water and isopropyl alcohol. This solution can be used along with the
soft cotton cloth.
Computer wipes. Only use these if they specifically state on the package they are
designed for LCD laptop screens. Computer wipes can come in handy for fast
clean-ups or when you want to avoid mixing up a cleaning solution yourself.
3. What types of cleaners are acceptable?
Water
Vinegar (mixed with water)
Isopropyl Alcohol
NOTICE: The following cleaners are unacceptable:
Acetone
Ethyl alcohol
Ethyl acid
Ammonia
Methyl chloride

ZK810 Series User Manual
12
CE Notice
This device complies with the requirements of the CE directive.’
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with emission limits.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
WEEE Notice
This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste
electrical and electronic equipment (WEEE). The Directive determines the framework for the
return and recycling of used appliances as applicable throughout the European Union. This label
is applied to various products to indicate that the product is not to be thrown away, but rather
reclaimed upon end of life per this Directive.

ZK810 Series User Manual
13
© Copyright 2018. ZKTeco Inc. ZKTeco Logo is a registered trademark of ZKTeco or a related company. All other
product and company names mentioned are used for.
ZK Building, Wuhe Road, Gangtou, Bantian, Buji
Town, Longgang District, Shenzhen China 518129
Tel: [phone]
Fax: [phone]
www.zkteco.com