Zonzini DOMINO AUTOMATIC User manual

QUICK START GUIDE TO USING DOMINO AUTOMATIC
Please read the complete manual of the stair climber. This does not replace the manual, instead it illustrates certain
phases in schematic form for quick and safe use. Operators must be trained on using the trolley according to the
use and maintenance manual.
CLIMBING PHASE:
1) Place the load on the base of the trolley (check the maximum capacity of your trolley
not to exceed the permissible load limits).
) Tie the load properly with the strap provided.
3) Use the wheels or crawler tracks to move the load close to the stair to climb or descend.
PLEASE NOTE: If the load is heavy, turn on the stair climber with the button, press the
"M" key and pull the knob of the joystick towards you so that the trolley tilts the load
toward the operator, thus easing the operation.
4) Near the stair, bring the load surface to its original position (all closed) if
necessary.

5) Press the "Automatic" button on the control keyboard and wait for the load to be
automatically tilted towards the operator.
6) Start climbing the stair by modulating the speed with the joystick and waiting for the
piston to automatically tilt the load as you ascend. If necessary, stop to check the
stability of the load.
7) While moving, verify that automatic tilting set by default on the trolley is sufficient to
guarantee the stability of the load, otherwise press the "M" key and manually adjust
the load surface tilting with the joystick.
PLEASE NOTE: a tilting different from the default one may be necessary for particularly
bulky loads or for stairs with non-standard inclination.
Overturning load danger.
It is crucial for the tracks to always rest firmly on the steps below and
therefore be in contact with the staircase. It is strictly forbidden to try and pull
the load towards you because when the automatic mode is engaged, this
involves AUTOMATIC CLOSURE of the actuator and thus load instability.
MISTAKE: Tracks not in
contact with the staircase.

8) Continue climbing by adjusting the speed with the joystick so that it is suitable
to the volume, weight and fragility of the load carried.
9) Once the stair has ended, when you reach the last step, identify the ba ance point
of the oad, stop and ight y pu the tro ey towards you through the hand e.
Then, wait for the automatic closing of the crawler tracks. A ways keep a firm ho d of
the contro hand e when moving the oad surface, to ensure that the tro ey
remains stab e. When the rear part of the tracks is resting on the landing and while the
actuator is completing the closure, move the trolley with the joystick to a more secure
position on the landing. Pay particu ar attention to the equi ibrium position of the
oad during this stage to prevent the oad from being supported by the operator
and to make sure that the automatic c osing mode can be activated and comp eted
proper y.
10) Through the joystick, rotate the load on the landing and start a new flight of
stairs.
DESCENT PHASE:
11) When you are on the landing and you must descend the flight of stairs, s ow y
approach with the craw er tracks and detect the ba ance position of the oad.
IMPORTANT: Never ean beyond the ba ance point, danger of overturning the
oad!
Balance point
Balance point
Balance point

1 ) Using the handle, ight y push the trolley over the balance point in order to
obtain the automatic opening of the crawler tracks.
13) Wait for the crawler tracks to open until they rest on the steps below.
IMPORTANT: Make sure that the craw er tracks rest fu y on the steps be ow
before beginning the descent. DANGER OF OVERTURNING THE LOAD.
14) Start descending by modulating the speed with the joystick according to
volume, weight and fragility of the load carried.
15) Once reached the landing below, slow down and wait for the automatic closing
of the load surface until the crawler tracks are level.
16) Always disable the automatic function when using the trolley on wheels for
moving on a level surface.
Before using, read the manual of use and watch carefully the proper operation video
online:
www.zonzini.it
www.zonzini.us
www.zonzini.es
www.zonzini.fr
www.zonzini.de
We are at your disposal for any question and/or clarification.
ZONZINI SRL
Zonzini Sr Tel.: [phone] Tax Code and VAT No.: IT 03550540 35
Vic. Don Luigi Sturzo, 8 - Z.I. Fax: [phone] R.E.A. 345531
3705 Casaleone, Verona Email: [e-mail] Single shareholder – Share capital: € 15,000.00 F.P.
Italy www.zonzini.it PEC (Certified e-mail): [e-mail]