Zoom Edit&Share User manual

© ZOOM Corporation
Reproduction of this manual by any means, in whole or in part, is prohibited.
Edit&Share-Manual-E-5
Table of Contents
Connecting and ejecting the device・・・・ 2
Editing patches・・・・・・・・・・・・・・・・・・・・・・・・ 4
Editing patch list・・・・・・・・・・・・・・・・・・・・・・・ 6
Managing patch groups・・・・・・・・・・・・・・・・ 8
Other useful functions・・・・・・・・・・・・・・・・・11
Troubleshooting・・・・・・・・・・・・・・・・・・・・・・・12
Software License Agreement・・・・・・・・・・13
Operation Manual

2
Connecting and ejecting the device
Connecting and ejecting the device
You can also copy, initialize and rename
patches, as well as move and reorder them,
update them on a connected device and
import and export them.
You can create new folders, copy, rename,
delete, move and reorder folders, update
them on a connected device and import
and export them.
By connecting the device and PC, the application is launched automatically.
Here you can turn effects ON/OFF,
adjust parameters, change effects,
and rename and store patches .
Editing patches(see p.4)
Editing patch list(see p.6)
Managing patch groups(see p.8)
Starting the application
When using the Mac version
To launch this application manually, launch it from the Application
folder. This manual mainly describes using the Windows version of
the application. When using the Windows version, “PC” appears in
the Library, but on a Mac, “Mac” will appear instead. Please read
the instructions with this difference in mind.
1
3
2
To launch this application manually, double-click
the Edit&Share shortcut icon on your desktop.
1
32

3
Connecting and ejecting the device
Connecting and ejecting the device
Selecting a device manually Ejecting the device
Right-click the device and select Eject.
Open the Device menu, choose Connect and click the name
of the device.
If the name of the device does not appear, open
the Display menu, select Show Devices, and put
a check next to the device name.

4
Editing patches
Editing patches
Change the order of
the effects.
Note: This option only
appears for devices that
support this function.
Open and close
the Editor.
Set between
40–250 BPM
(beats per minute).
Select the effect from the pop-up menu.
Dragging the knobs up or down.
Click the switch.
Adjusting the parametersTurning ON / OFF the e󱐯ect Changing the e󱐯ect type
Click the effect name.
When using a device that supports
reordering, you can also move the
effects by dragging and dropping.
To turn the knob slowly,
push and hold the Shift key
as you drag the knob.
You can also use the right-click
( on Mac, Ctrl key + Click ) on
the effect to perform operations.

5
Click Store.
Editing patches
Editing patches
Renaming patches Storing patches
Click the patch name to rename the patch.
The following characters and symbols can be used.
! # $ % & ‘ () +, -. ; = @ [] ^ _ ` { } ~ A-Z, a-z, 0-9, (space)
Note: Upper number of characters can be entered,
depending on the model.
Depending on the device that you are using, click
STORE button to save the new name.
To change the save destination for the patches,
click on one of the triangle keys ( ).
Click the STORE button.

6
Editing patch list
Editing patch list
Copying / Pasting patches Initializing patchesRenaming patches
Double-click the patch and
rename it.
Select the patch and press the Delete
key (on Mac, fn key + Delete key.)
Right-click the patch
and select Copy.
Right-click the patch
and select Paste.
list sort
12
Delete
radar
The patch list can only be edited
when in list or radar mode.

7
You can use the right-click menu or action button ( )
to perform edit operations.
Editing patch list
Editing patch list
Reorder patches in the list Update a patch on a connected device Exporting / Importing patches
Drag the patch and drop it where
you want it to be.
To work with multiple patches, hold Shift key or Ctrl key
(on Mac, command key), and then click the patches.
If you are using a G5, you can also import G3 and
G3X patches.
If you are using a G3 Ver.2.00 or later or G3X, you
can also import G3 Ver.1.12 or earlier patches.
Drag the patch and drop it where you want it to be.
Drag a patch group and drop it
in the User Area.
Click Store.

8
Managing patch groups
Managing patch groups
Creating folders Creating patch groups
You can use the action button ( ) to perform edit operations.
Right-click the icon and select New Patch Group.Right-click the icon and select New Folder.

9
Managing patch groups
Managing patch groups
Renaming patch groups Deleting patch groupsCopying / Pasting patch groups
Double-click the patch group
and rename it.
Right-click the patch
group and select
Copy.
Right-click the patch
group and select
Paste.
Right-click the patch group and
select Delete.
12

10
Managing patch groups
Managing patch groups
Reorder patch groups Update a patch group on a connected device
Exporting / Importing patch groups
Drag a patch group and drop it
in the User Area.
Drag the patch groups and drop
it where you want it to be.
Drag the patch groups and drop it where you want it to be.
Click Replace.
You can use the right-click menu or action button ( )
to perform edit operations.
If you are using a G5, you can also import G3 and
G3X patch groups.
If you are using a G3 Ver.2.00 or later or G3X, you
can also import G3 Ver.1.12 or earlier patch groups.