ZooZ ZSE01 User manual

WARRANTY
This Limited Warranty applies to physical goods, and only for physical goods,
purchased from Zooz (the “Physical Goods”).
What does this limited warranty cover?
This Limited Warranty covers any defects in material or workmanship under
normal use according to instructions from the User Manual during the War-
ranty Period. Warranty coverage applies to purchases made from authorized
dealers only. See full list of Zooz distributors here: myzooz.com/buy
During the Warranty Period, Zooz will repair or replace, at no charge, prod-
ucts or parts of a product that prove defective because of improper material
or workmanship, under normal use and recommended maintenance. Zooz
does not assume the cost of return shipping for warranty service.
How long does the coverage last?
The Warranty Period for Physical Goods purchased from Zooz is 12 months
from the date you purchased this product.
What does this limited warranty not cover?
This Limited Warranty does not cover any problem that is caused by:
- conditions, malfunctions or damage not resulting from defects in material
or workmanship
- improper handling or installation of the product
The warranty does not cover purchases from unauthorized dealers or sec-
ond-hand sources. The warranty does not cover return shipping cost for
warranty service.
What do you have to do?
To obtain warranty service, please contact us to determine the problem and
oer a quick solution for you: [email protected]om
You may also get in touch with a reseller of the product directly to return or
replace the product within 30 days of purchase.
IN NO EVENT SHALL ZOOZ OR ITS SUBSIDIARIES AND AFFILIATES BE LIABLE
FOR ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL, OR CONSEQUENTIAL
DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, OR USE IN-
CURRED BY CUSTOMER OR ANY THIRD PARTY, WHETHER IN AN ACTION IN
CONTRACT, OR OTHERWISE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
ZOOZ’S LIABILITY AND CUSTOMER’S EXCLUSIVE REMEDY FOR ANY CAUSE OF
ACTION ARISING IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR
USE OF THE PRODUCTS, WHETHER BASED ON NEGLIGENCE, STRICT LIABILI-
TY, BREACH OF WARRANTY, BREACH OF AGREEMENT, OR EQUITABLE PRINCI-
PLES, IS EXPRESSLY LIMITED TO, AT ZOOZ’S OPTION, REPLACEMENT OF, OR
REPAYMENT OF THE PURCHASE PRICE FOR THAT PORTION OF PRODUCTS
WITH RESPECT TO WHICH DAMAGES ARE CLAIMED.
ALL CLAIMS OF ANY KIND ARISING IN CONNECTION WITH THIS AGREEMENT
OR THE SALE OR USE OF PRODUCTS SHALL BE DEEMED WAIVED UNLESS
MADE IN WRITING WITHIN THIRTY (30) DAYS FROM ZOOZ’S DELIVERY, OR THE
DATE FIXED FOR DELIVERY IN THE EVENT OF NONDELIVERY.
FCC NOTE
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTER-
FERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USERíS AUTHORITY TO OPERATE
THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR DRY LOCATIONS ONLY.
DO NOT IMMERSE IN WATER. NOT FOR USE WHERE DIRECTLY EXPOSED TO
WATER.
USER MANUAL
Z-WAVE INDOOR SIREN
ZSE01
Z-Wave Certied Device
GR-304N
2
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used according to instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in any given installation.
If this equipment causes harmful interference to radio or television reception,
the user may try to correct the interference by taking one or more of the fol-
lowing measures:
- Reorient or relocate receiving antenna
- Increase the separation between equipment and receiver
- Connect equipment into a separate outlet or circuit from receiver
- Consult the dealer or an experienced radio/TV technician for additional
assistance
All brand names displayed are trademarks of their respective holders.
[c] Zooz 2015
3 4
Indoor Siren.indd 1 12/6/15 5:13 PM

- No part of the device may be replaced or repaired by the user (except bat-
teries)
INSTALLATION
WAIT!
Include the indoor siren to your Z-Wave network before mounting it.
Z-WAVE INCLUSION
1. Bring the siren within 3 feet from your Z-Wave gateway controller
2. Put your Z-Wave controller in inclusion/pairing mode
3. Press and release the Z-Wave button on the siren THREE TIMES quickly
4. A new alarm device should appear on your controller’s device list
Q: I have not been able to add the device to my network aer several at-
tempts, what do I do now?
A: If you are unable to include the Z-Wave switch to your controller, please
try one of the following:
- Bring the siren closer to your Z-Wave controller
- Press and release the Z-Wave button quickly several times once you put the
controller in the inclusion mode to ensure the command has gone through
- Put your controller in the EXCLUSION mode and press and release the
Z-Wave button quickly 3 times, then try adding it to your network again
Z-WAVE BUTTON
WELL DONE!
You have picked the nest solution for your smart home, congrats!
Now it’s time to enjoy these great features of your new product:
- Audible and visual alarm
- Wireless control, notications, and trigger by other smart home devices
(when included to a Z-Wave gateway controller)
- Z-Wave Plus with improved 500 chip for faster and safer wireless commu-
nication
- Acts as signal repeater when powered by AC adapter
- Sleek design and compact size
SPECIFICATIONS
Model Number: ZSE01
Z-Wave Signal Frequency: 908.42 MHz
Volume: 110dB
Power: DC 5V/1A and 4 AAA (1.2V) batteries for back-up power
Range: Up to 100 feet line of sight
Operating Temperature: 14 °F to 122 °F
Operating Humidity: ≤ 80%
Installation and Use: Indoor only
BEFORE YOU RETURN IT
Let us know if you are having any issues installing or operating the device.
Our fast and friendly tech support is here to help, every day of the year:
[email protected]om
Go to myzooz.com to nd out how to make your home smarter and safer.
WARNING
- This product should be installed indoors upon completion of any renova-
tions
- Prior to installation, the device should be stored in a dry, dust- and mold-
proof place
- Do not install the siren in a place with direct sun exposure, high temperature
or humidity- Keep away from chemicals, water, and dust
- Ensure the device is never close to any heat source or open ame to pre-
vent re
- Ensure the device is connected to an electric power source that does not
exceed the maximum load power
- The batteries are only a backup power source and are not recommended for
use as the main power supply
5678
Z-WAVE EXCLUSION
1. Bring the siren within 3 feet from your Z-Wave gateway controller
2. Put your Z-Wave controller in exclusion/unpairing mode
3. Press and release the Z-Wave button on the siren THREE TIMES quickly
4. The device should disappear from your controller’s device list
Please repeat the process following all steps carefully if rst attempt is un-
successful.
Z-Wave Automation and Advanced Functionality:
Once the Z-Wave siren is added to your network, you are able to trigger it
with other components from your network, as well as control and monitor its
activity from your mobile device, or computer.
Depending on your Z-Wave gateway’s home automation soware capabil-
ities, you may be able to associate your indoor siren in groups with other
Z-Wave devices to schedule scenes and create events.
Please refer to your controller’s user guide for advanced programming in-
structions as they are a little dierent for every soware.
MOUNTING
Find the best spot for your Z-Wave indoor siren - a corner in the living room,
garage ceiling, or anywhere else you see t. Use the 2 screws included in the
box to x the mounting bracket to at surface of your choice.
Once the bracket is securely installed, carefully slide the siren onto the brack-
et and position it by tilting it to either side, upwards, or downwards.
Indoor Siren.indd 2 12/6/15 5:13 PM