Zte BLADE A910 User manual

1
ZTE BLADE A910 Quick Start Guide.......2
ZTE BLADE A910 Kurzanleitung...........16
ZTE BLADE A910 Korisnički priručnik...30
ZTE BLADE A910 Hitri vodič.................44
079584508358

2
ZTE BLADE A910
Quick Start Guide
EN

3
LEGAL INFORMATION
Copyright © 2016 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted,
reproduced, translated or used in any form or by
any means, electronic or mechanical, including
photocopying and microlm, without the prior
written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make
modications on print errors or update
specications in this guide without prior notice.
We offer self-service for our smart terminal
device users. Please visit the ZTE ofcial website
(at www.ztedevice.com) for more information
on self-service and supported product models.
Information on the website takes precedence.
Visit http://www.ztedevice.com to download the
user manual. Just click Support > Manuals from
the home page and then select your location,
product type, and name to search for related
support information.
Disclaimer
ZTE Corporation expressly disclaims any liability
for faults and damages caused by unauthorized
modications of the software.
Images and screenshots used in this guide
may differ from the actual product. Content in
this guide may differ from the actual product or
software.

4
Trademarks
ZTE and the ZTE logos are trademarks of ZTE
Corporation.
Google and Android are trademarks of Google,
Inc.
The Bluetooth® trademark and logos are owned
by the Bluetooth SIG, Inc. and any use of such
trademarks by ZTE Corporation is under license.
microSDHC Logo is a trademark of SD-
3C, LLC.
Other trademarks and trade names are the
property of their respective owners.
Version No.: R1.0
Edition Time : August 20, 2016

5
Getting to Know Your Phone
Front camera
Proximity &
light sensor
Touch screen
Recent apps key
Menu key
Back key
Home key
Volume key
Earpiece
Indicator light
Headset jack
Back camera
Flash
Fingerprint
sensor
Charging/
micro-USB jack
Power key
nano-SIM/
microSDHC
card tray

6
Installing the nano-SIM Card(s)
and the microSDHC™ Card
WARNING!
To avoid damage to the phone, do not use any
other kind of SIM cards, or any non-standard
nano-SIM card cut from a SIM card. You can
get a standard nano-SIM card from your service
provider.
nano-SIM
card slot 1
nano-SIM
card slot 2
microSDHC
card slot
NOTE:
4G LTE works in both nano-SIM card slots
individually, but not simultaneously. If one slot
works as 4G LTE, the other slot can only work as
2G.

7
Charging the Phone
Your phone’s battery should have enough power
for the phone to turn on, nd a signal, and make
a few calls. You should fully charge the battery
as soon as possible.
WARNING!
Use only ZTE-approved chargers and cables.
The use of unapproved accessories could
damage your phone or cause the battery to
explode.
CAUTION:
Do not change the built-in rechargeable battery
in your phone by yourself. The battery can only
be changed by ZTE or ZTE authorised service
provider.

8
NOTE:
If the battery is extremely low, you may be unable
to power on the phone even when it is being
charged. In this case, try again after charging
the phone for at least 20 minutes. Contact the
customer service if you still cannot power on the
phone after prolonged charging.
NOTE:
If the screen freezes or takes too long to
respond, try pressing and holding the Power key
for about 10 seconds to restart the phone.
Product Safety Information
Don’t make or receive phone calls
while driving. Never text while
driving.
Keep your phone at least 15 mm
away from your ear or body while
making calls.
Small parts may cause choking.
Your phone can produce a loud
sound.
To prevent possible hearing damage,
do not listen at high volume levels
for long periods.
Avoid contact with anything
magnetic.

9
Keep away from pacemakers and
other electronic medical devices.
Turn off when asked to in hospitals
and medical facilities.
Turn off when told to on aircraft and
at airport.
Turn off when near explosive
materials or liquids.
Don’t use at gas stations.
Your phone may produce a bright or
ashing light.
Don’t dispose of your phone in re.
Avoid extreme temperatures.
Avoid contact with liquids. Keep your
phone dry.
Do not attempt to disassemble your
phone.
Only use approved accessories.
Don’t rely on your phone as a
primary device for emergency
communications.

10
Specic Absorption Rate (SAR)
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits
for exposure to radio waves recommended
by international guidelines. These guidelines
were developed by the independent scientic
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known
as Specic Absorption Rate, or SAR. The SAR
limit for mobile devices is 2 W/kg and the highest
SAR value for this device when tested at the
head was 0.274 W/kg*, and when tested at the
body was 0.983 W/kg*. As mobile devices offer
a range of functions, they can be used in other
positions, such as on the body as described in
the user manual**.
As SAR is measured utilizing the device’s highest
transmitting power, the actual SAR of this device
while operating is typically below that indicated
above. This is due to automatic changes to the
power level of the device to ensure it only uses
the minimum power required to communicate
with the network.
** Please see body worn operation in the user
manual.

11
Declaration of RoHS Compliance
To minimize the environmental impacts and take
more responsibilities to the earth we live on, this
document shall serve as a formal declaration
that ZTE BLADE A910 manufactured by ZTE
CORPORATION is in compliance with the
Directive 2011/65/EU of the European Parliament
- RoHS (Restriction of Hazardous Substances)
with respect to the following substances:
1. Lead (Pb)
2. Mercury (Hg)
3. Cadmium (Cd)
4. Hexavalent Chromium (Cr (VI))
5. Polybrominated biphenyls (PBBs)
6. Polybrominated diphenyl ethers (PBDEs)
ZTE BLADE A910 manufactured by ZTE
CORPORATION meets the requirements of EU
2011/65/EU.

12
Disposal of Your Old Appliance
1. When this crossed-out
wheeled bin symbol is
attached to a product,
it means the product is
covered by the European
Directive 2012/19/EU.
2. All electrical and
electronic products
should be disposed
of separately from the
municipal waste stream
via designated collection
facilities appointed by the
government or the local
authorities.
3. The correct disposal of
your old appliance will
help prevent potential
negative consequences
for the environment and
human health.
For this product’s recycling information based
on WEEE directive, please send an e-mail to
[email protected]

13
EC DECLARATION OF
CONFORMITY
It is hereby declared that following designated
product:
Product Type: LTE/WCDMA/GSM(GPRS)
Multi-Mode Digital Mobile Phone
Model No: ZTE BLADE A910
Product Description: LTE/WCDMA/
GSM(GPRS) Multi-Mode Digital Mobile
Phone
Complies with the essential protection
requirements of Directives on Radio and
Telecommunication Terminal Equipment
(Directive 1999/5/EC), Restriction of the
Certain Hazardous Substances in electrical and
electronic equipment (Directive 2011/65/EU),
Eco-design Requirements for Energy-Related
Products (Directive 2009/125/EC) and their
amendments.
This declaration applies to all specimens
manufactured identical to the samples submitted
for testing/evaluation.
Assessment of compliance of the product with
the requirements relating to Directive 1999/5/EC
was performed by PHOENIX TESTLAB GmbH
(Notied Body No.0700) and assessment of
compliance of the product with the requirements
relating to Directive 2011/65/EU was performed

14
by Intertek Testing Services Ltd., Shanghai
and Directive 2009/125/EC was performed by
TÜV Rheinland (Shenzhen) Co.,Ltd and SGS-
CSTC Standards Technical Service Co.,Ltd. .
The assessments were based on the following
regulations and standards:
Requirement Standard Report No.
Health and
safety
EN 50332-1:2000;
EN 50332-2:2003
EN 50566:2013/
AC:2014;
EN 50360:
2001+A1:2012
EN 62209-1:2006;
EN 62209-2:2010;
EN 62479: 2010
SET2016-07768
SET2016-08347
EN 60950-1:2006+A11
:2009+A1:2010+A12:2
011+A2:203
SET2016-06540
EMC
EN 301 489-1 V1.9.2;
EN 301 489-3 V1.6.1;
EN 301 489-7 V1.3.1;
EN 301 489-17 V2.2.1;
EN 301 489-24 V1.5.1
SET2016-07830
Radio
Spectrum
EN 301 908-1 V7.1.1;
EN 301 908-2 V6.2.1;
EN 301 908-13 V6.2.1;
EN 301 511 V9.0.2
EN 300 328 V1.9.1;
EN 300 440-1 V1.6.1
EN 300 440-2 V1.4.1
SET2016-07535
SET2016-07537
SET2016-07536
SET2016-07766
SET2016-07767
RoHS IEC 62321:
2008+2013+2015
160400152
SHA-001

15
ErP (EC) No 278/2009
SZES151200
410701
SZES151200
410501
17054296001
17056385001
This declaration is the responsibility of the
manufacturer:
ZTE Corporation
ZTE Plaza, Keji Road South, Hi-
Tech Industrial Park, Nanshan District,
Shenzhen, Guangdong, 518057, P.R.China
Authorised person signing for the company:
Yao Cuifeng Chief Quality Ofcer of ZTE
Corporation
Name in block letters & position in the
company
Shenzhen, 31st May 2016
Place & date Legally valid signature

16
ZTE BLADE A910
Kurzanleitung
DE

17
RECHTLICHE INFORMATIONEN
Copyright © 2016 ZTE CORPORATION.
Alle Rechte vorbehalten.
Ohne die schriftliche Genehmigung der ZTE
Corporation darf kein Teil dieser Veröffentlichung
in irgendeiner Form oder mit irgendwelchen
Mitteln, elektronisch oder mechanisch,
einschließlich Fotokopien und Mikrolm, zitiert,
vervielfältigt, übersetzt oder genutzt werden.
Hinweis
Die ZTE Corporation behält sich das Recht vor,
Druckfehler und technische Änderungen in dieser
Anleitung ohne Vorankündigung zu korrigieren
bzw. zu aktualisieren.
Für Anwender, die sich mit unseren Geräten
auskennen, bieten wir auch die Möglichkeit
zur selbstständigen Fehlerbehebung an.
Besuchen Sie die ofzielle ZTE-Website (auf
www.ztedevice.com) für weitere Informationen
zur selbstständigen Fehlerbehebung sowie
zu den hierfür unterstützten Produktmodellen.
Informationen auf der Website haben Vorrang.
Besuchen Sie http://www.ztedevice.com, um das
Benutzerhandbuch herunterzuladen. Klicken
Sie auf der Startseite einfach auf Support >
Manuals, und wählen Sie anschließend Ihren
Standort, Produkttyp und -namen aus, um nach
den jeweiligen Supportinformationen zu suchen.

18
Haftungsausschluss
Die ZTE Corporation übernimmt keine Haftung
für Fehler und Schäden, die durch nicht
autorisierte Veränderungen an der Software
verursacht wurden.
Die in dieser Anleitung verwendeten Bilder und
Screenshots können vom tatsächlichen Produkt
abweichen. Inhalte in diesem Handbuch können
vom tatsächlichen Produkt oder der Software
abweichen.
Marken
ZTE und die ZTE-Logos sind Marken der ZTE
Corporation.
Google und Android sind Marken von Google,
Inc.
Die Bluetooth® Marke und ihre Logos sind
Eigentum der Bluetooth SIG, Inc. und jede
Nutzung dieser Marken vonseiten der ZTE
Corporation ist lizenziert.
Das microSDHC-Logo ist eine Marke
von SD-3C, LLC.
Sonstige Marken und Markennamen sind
Eigentum ihrer jeweiligen Inhaber.
Versions-Nr.: R1.0
Bearbeitungszeit: 20. August 2016

19
Erstes Kennenlernen Ihres
Telefons
Headset-
Anschluss
Rückseitige
Kamera
Blitz
Fingerab-
drucksensor
Lade-/Micro-
USB-Anschluss
EIN-/AUS
Taste
Nano-SIM/
microSDHC-
Kartenfach
Frontkamera
Näherungs- und
Lichtsensor
Touchscreen
Taste für zuletzt
verwendete
Anwendungen
Menütaste
Zurücktaste
Home Taste
Lautstärke-
Taste
Hörer
Leuchtanzeige

20
Einlegen der Nano-SIM-Karte(n)
und der SDHC™-Karte
WARNUNG!
Um das Telefon nicht zu beschädigen,
verwenden Sie keine anderen Arten von SIM-
Karten und keine aus einer SIM-Karte gefertigte
Nano-SIM-Karte, die nicht dem Standard
entspricht. Eine Standard-Nano-SIM-Karte
erhalten Sie bei Ihrem Serviceanbieter.
Nano-SIM-
Kartensteckplatz 1
Nano-SIM-
Kartensteckplatz 2
microSDHC-
Kartensteckplatz
HINWEIS:
4G LTE funktioniert in jedem einzelnen der beiden
Nano-SIM-Kartensteckplätze, aber nicht in beiden
gleichzeitig. Wenn ein Steckplatz für 4G LTE
verwendet wird, ist im anderen nur 2G möglich.