Zte Blade A510 User manual

A510

ZTE BLADE A510 Quick Start Guide........ 2
ZTE BLADE A510 Guide de démarrage
rapide...................................................... 16
ZTE BLADE A510 Kurzanleitung............ 30
ZTE BLADE A510 Guía de inicio rápido. 45
ZTE BLADE A510 Guida rapida all'uso .. 60
ZTE BLADE A510 Snelstartgids ............. 74
ZTE BLADE A510 Guia de início rápido. 88
ZTE BLADE A510 Οδηγός γρήγορης
έναρξης ................................................. 102
ZTE BLADE A510 Hızlı Başlangıç Kılavuzu
...............................................................116
1

ZTE BLADE A510
Quick Start Guide
2

LEGAL INFORMATION
Copyright © 2016 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted,
reproduced, translated or used in any form
or by any means, electronic or mechanical,
including photocopying and microfilm,
without the prior written permission of ZTE
Corporation.
Notice
ZTE Corporation reserves the right to make
modifications on print errors or update
specifications in this guide without prior
notice.
We offer self-service for our smart terminal
device users. Please visit the ZTE official
website (at www.ztedevice.com) for more
information on self-service and supported
product models. Information on the website
takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any
liability for faults and damages caused by
unauthorized modifications of the software.
Images and screenshots used in this guide
may differ from the actual product. Content
in this guide may differ from the actual
product or software.
Trademarks
ZTE and the ZTE logos are trademarks of
ZTE Corporation.
Google and Android are trademarks of
Google, Inc.
The Bluetooth®trademark and logos are
owned by the Bluetooth SIG, Inc. and any
3

use of such trademarks by ZTE
Corporation is under license.
microSDHC Logo is a trademark of
SD-3C, LLC.
Other trademarks and trade names are the
property of their respective owners.
Version No.: R2.0
Edition Time : November 3, 2016
4

Getting to Know Your
Phone
5
Indicator light
Front camera
Proximity &
light sensor Earpiece
Volume key
Power key
Charging/
micro-USB jack
Main
microphone
Speaker
Back
cameraFlash
Auxiliary
microphone
Headset
jack
Touch screen
Recent
apps key
Home key
Back key

Installing the
micro-SIM/nano-SIM Card
and the microSDHC™
Card
WARNING!
To avoid damage to the phone, do not use
any other kind of SIM cards, or any
non-standard micro-SIM/nano-SIM card cut
from a SIM card. You can get a standard
micro-SIM/ nano-SIM card from your
service provider.
Dual SIM cards phone:
nano-SIM
card slot
microSDHC
card slot
micro-SIM
card slot
6

NOTE:
The two SIM card slots can both support
4G network, but when one SIM card is
using 4G/3G/2G network,while the network
of another SIM card will become 2G only
automatically.
You can change the SIM card referred type
of network manually.
Charging the Phone
Your phone’s battery should have enough
power for the phone to turn on, find a signal,
and make a few calls. You should fully
charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and
cables. The use of unapproved accessories
could damage your phone or cause the
battery to explode.
CAUTION:
Do not change the built-in rechargeable
battery in your phone by yourself. The
battery can only be changed by ZTE or ZTE
authorised service provider.
7

NOTE:
If the screen freezes or takes too long to
respond, try pressing and holding the
Power key for about 10 seconds to restart
the phone.
Product Safety
Information
Don’t make or receive phone
calls while driving. Never text
while driving.
Keep your phone at least 15 mm
away from your ear or body while
making calls.
Small parts may cause choking.
Your phone can produce a loud
sound.
To prevent possible hearing
damage, do not listen at high
volume levels for long periods.
Avoid contact with anything
magnetic.
Keep away from pacemakers
and other electronic medical
devices.
Turn off when asked to in
hospitals and medical facilities.
Turn off when told to on aircraft
and at airport.
8

Turn off when near explosive
materials or liquids.
Don’t use at gas stations.
Your phone may produce a bright
or flashing light.
Don’t dispose of your phone in
fire.
Avoid extreme temperatures.
Avoid contact with liquids. Keep
your phone dry.
Do not attempt to disassemble
your phone.
Only use approved accessories.
Don’t rely on your phone as a
primary device for emergency
communications.
Specific Absorption Rate
(SAR)
Your mobile device is a radio transmitter
and receiver. It is designed not to exceed
the limits for exposure to radio waves
recommended by international guidelines.
These guidelines were developed by the
independent scientific organization ICNIRP
and include safety margins designed to
assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement
9

known as Specific Absorption Rate, or SAR.
The SAR limit for mobile devices is 2 W/kg
and the highest SAR value for this device
when tested at the head was 0.416 W/kg*
and when tested at the body was 0.591
W/kg*.
As SAR is measured utilizing the device’s
highest transmitting power, the actual SAR
of this device while operating is typically
below that indicated above. This is due to
automatic changes to the power level of the
device to ensure it only uses the minimum
power required to communicate with the
network.
* The tests are carried out in accordance
with EN 50360, EN 50566, EN 62479, EN
62209-1 and EN 62209-2.
Declaration of RoHS
Compliance
To minimize the environmental impacts and
take more responsibilities to the earth we
live on, this document shall serve as a
formal declaration that ZTE BLADE A510
manufactured by ZTE CORPORATION is in
compliance with the Directive 2011/65/EU
of the European Parliament - RoHS
(Restriction of Hazardous Substances) with
respect to the following substances:
1. Lead (Pb)
2. Mercury (Hg)
3. Cadmium (Cd)
4. Hexavalent Chromium (Cr (VI))
5. Polybrominated biphenyls (PBBs)
6. Polybrominated diphenyl ethers
(PBDEs)
10

ZTE BLADE A510 manufactured by ZTE
CORPORATION meets the requirements of
Directive 2011/65/EU.
Disposal of Your Old
Appliance
1. When this crossed-out
wheeled bin symbol is
attached to a product, it
means the product is
covered by the European
Directive 2012/19/EU.
2. All electrical and
electronic products
should be disposed of
separately from the
municipal waste stream
via designated collection
facilities appointed by the
government or the local
authorities.
3. The correct disposal of
your old appliance will
help prevent potential
negative consequences
for the environment and
human health.
For this product’s recycling information
based on WEEE directive, please send an
e-mail to [email protected]
11

EC DECLARATION OF
CONFORMITY
It is hereby declared that following
designated product:
Product Type: LTE/WCDMA/GSM（GPRS）
Mutil-Mode Digital Mobile Phone
Model No: ZTE BLADE A510/BLADE
A510
Product Description: LTE/WCDMA/GSM
Mobile Phone
Complies with the essential protection
requirements of Directives on Radio and
Telecommunication Terminal Equipment
(Directive 1999/5/EC), Restriction of the
Certain Hazardous Substances in electrical
and electronic equipment (Directive
2011/65/EU), Eco-design Requirements for
Energy-Related Products (Directive
2009/125/EC) and their amendments.
This declaration applies to all specimens
manufactured identical to the samples
submitted for testing/evaluation.
The assessments were based on the
following regulations and standard:
12

Requirement Standard Assessment
Body
Health and
safety
EN60950-1:2006
+
11:2009+A1:201
0
+A12:2011+A2:2
013;
EN
50332-2:2013;
EN
50360:2001/A1:
2012;
EN
50566:2013/AC:
2014;
EN
62209-1:2006;
EN
62209-2:2010;
EN62479: 2010;
PHOENIX
TESTLAB
EMC
EN 301 489-1
V1.9.2;
EN 301 489-3
V1.6.1;
EN 301 489-7
V1.3.1;
EN 301 489-17
V2.2.1;
EN 301 489-24
V1.5.1;
PHOENIX
TESTLAB
13

Radio
Spectrum
EN 301 511
V12.1.1;
EN 301 908-1
V7.1.1;
EN 301 908-2
V6.2.1;
EN 301 908-13
V6.2.1;
EN 300 328
V1.9.1;
EN300 440-1
V1.6.1;
EN 300 440-2
V1.4.1;
PHOENIX
TESTLAB
RoHS IEC 62321:2008+201
3+2015
Intertek
Testing
Service
Ltd.,
Shanghai
ErP (EC) No
278/2009
Compliance
Test
Department
of
Shenzhen
ZTE
Technology
Service
Co.,Ltd
14

This declaration is the responsibility of the
manufacturer:
ZTE Corporation
ZTE Plaza, #55 Keji Road South, Hi-Tech
Industrial Park, Nanshan District,
Shenzhen, Guangdong, 518057,
P.R.China
Authorised person signing for the company:
Yao Cuifeng Chief Quality Officer of
ZTE Corporation
Name in block letters & position in the
company
Shenzhen, 1th
Novemver 2016
Place & date Legally valid signature
15

ZTE BLADE A510
Guide de démarrage
rapide
16

MENTIONS LEGALES
Copyright © 2016 ZTE CORPORATION.
Tous droits réservés.
Aucune partie de ce guide ne peut être
extraite, reproduite, traduite ou utilisée
sous quelque forme ou par quelque moyen
que ce soit, électronique ou mécanique, y
compris par photocopie ou microfilm, sans
l'accord préalable écrit de ZTE Corporation.
Avis
ZTE Corporation se réserve le droit
d'apporter des corrections aux erreurs
d'impression ou de mettre les spécifications
à jour sans avis préalable.
Nous offrons un service d'assistance
autonome aux utilisateurs de nos
terminaux. Rendez-vous sur le site officiel
de ZTE (www.ztedevice.com) pour plus
d'informations sur ce service et les
modèles concernés. Les informations
disponibles sur le site Web sont prioritaires.
Limitation de responsabilité
ZTE Corporation rejette toute
responsabilité pour tout problème ou
dommage résultant d'une modification non
autorisée du logiciel.
Les images et les captures d'écran utilisées
dans ce guide peuvent différer du produit
final. Le contenu de ce guide peut différer
du produit ou du logiciel final.
Marques commerciales
ZTE et les logos ZTE sont des marques
commerciales de ZTE Corporation.
Google et Android sont des marques
commerciales de Google, Inc.
17

La marque commerciale et les logos
Bluetooth®sont la propriété de Bluetooth
SIG, Inc. et sont utilisés sous licence par
ZTE Corporation.
Le logo microSDHC est une
marque commerciale de SD-3C, LLC.
Toutes les autres marques commerciales et
noms commerciaux sont la propriété de
leurs détenteurs respectifs.
N° de version : R2.0
Date d'édition : 3 novembre 2016
18