Zte MF286D User manual

MF286D
Let’s go
Getting started with your device.

1
1. Prepare
• Avalid(U)SIMcard.
• Viewthelabelonyourdevicetogetthedefaultinformation.The
followinggureisforreferenceonly.

2
2. Insert the (U)SIM Card
Insertyour(U)SIMcard.

3
3. Connect the Power Adapter
Connect the power adapter to your device.

4
4. Start Your Device
SlidetheON/OFFswitchtostartyourdeviceandthenthedevicewill
connecttotheInternetautomatically.

5
5. Access the Internet
• 
Wi-Fi:GetthedefaultSSIDandpasswordonthelabelandconnect
totheWi-Finetworkwithyourmobiledevice,andthenaccessthe
Internet.

6
• 
Network cable(RJ45):ConnectwiththecomputerviaaLANport
andaccesstheInternet.

7
6. Change Your Device Settings
Youcanchangethedevicesettingsbyloggingintothe4GCPE
congurationwebpage.
1. ViewthelabelonyourdevicetogetthedefaultDevice Manager
Website IP address and Password.
2. LaunchtheInternetbrowserandentertheDevice Manager Website
IP addressintheaddressbar.
3. InputthepasswordandthenclickLogin.
4. Afterthe4GCPEcongurationwebpageisopened,youcan
changetheWi-FiSSID,passwordorothersettings.

8
Cable Broadband Mode
Yourdevicesupportsthecablebroadbandmodeandyoucanusethis
servicefromyourserviceprovidertoaccesstheInternet.
1. ConnecttheWAN/LAN1portandthebroadbandservicenetwork
portwithanetworkcable.
2. Logintothe4GCPEcongurationwebpage.
3. ChangetheoperationmodetoCable Broadband Mode.
NOTE:
PleasedisconnectfromtheInternetrstandthenyoucanchangethemode.
4. Setthedetailedparametersgotfromyourserviceprovider.
5. UseyourclientstoaccesstheInternet.

9
Telephone Function
Yourdevicesupportsthetelephonefunction.Beforeusingthetelephone
function,connectthetelephoneandinsertthe(U)SIMcard.
Tomakeacall:
1. Pickupthehandset.
2. Dialthetelephonenumber.
3. Waitforthecalltobeconnected.