Zte ZXR10 3800-8 Installation instructions

ZXR10
Router/EthernetSwitch
CommandManual(IPv4RoutingVolumeI)
Version4.8.22
ZTECORPORATION
ZTEPlaza,KejiRoadSouth,
Hi-TechIndustrialPark,
NanshanDistrict,Shenzhen,
P .R.China
518057
Tel:[phone]
Fax:[phone]
URL:http://ensupport.zte.com.cn
E-mail:[email protected]

LEGALINFORMATION
Copyright©2006ZTECORPORATION.
Thecontentsofthisdocumentareprotectedbycopyrightlawsandinternationaltreaties.Anyreproductionordistributionof
thisdocumentoranyportionofthisdocument,inanyformbyanymeans,withoutthepriorwrittenconsentofZTECORPO-
RATIONisprohibited.Additionally,thecontentsofthisdocumentareprotectedbycontractualcondentialityobligations.
Allcompany,brandandproductnamesaretradeorservicemarks,orregisteredtradeorservicemarks,ofZTECORPORATION
oroftheirrespectiveowners.
Thisdocumentisprovided“asis” ,andallexpress,implied,orstatutorywarranties,representationsorconditionsaredis-
claimed,includingwithoutlimitationanyimpliedwarrantyofmerchantability,tnessforaparticularpurpose,titleornon-in-
fringement.ZTECORPORATIONanditslicensorsshallnotbeliablefordamagesresultingfromtheuseoforrelianceonthe
informationcontainedherein.
ZTECORPORATIONoritslicensorsmayhavecurrentorpendingintellectualpropertyrightsorapplicationscoveringthesubject
matterofthisdocument.ExceptasexpresslyprovidedinanywrittenlicensebetweenZTECORPORATIONanditslicensee,
theuserofthisdocumentshallnotacquireanylicensetothesubjectmatterherein.
ZTECORPORATIONreservestherighttoupgradeormaketechnicalchangetothisproductwithoutfurthernotice.
UsersmayvisitZTEtechnicalsupportwebsitehttp://ensupport.zte.com.cntoinquirerelatedinformation.
TheultimaterighttointerpretthisproductresidesinZTECORPORATION.
RevisionHistory
RevisionNo.RevisionDateRevisionReason
R1.0Dec.28,2008FirstEdition
SerialNumber:sjzl20086531

AboutThisManual..............................................i
CommandIntroduction.....................................1
ManualUseGuide...........................................................1
DescriptionofMan-MachineCommands.............................1
AuxiliaryFunction...........................................................2
CommandMode.............................................................3
RIPProtocol......................................................7
address-familyipv4vrf....................................................7
auto-summary...............................................................8
default-metric................................................................8
disableinterface.............................................................9
distance........................................................................9
enableinterface............................................................10
exit-address-family........................................................10
ash-update-threshold...................................................10
ippoison-reverse...........................................................11
ipripauthenticationkey.................................................11
ipripauthenticationkey-chain........................................12
ipripauthenticationmode..............................................13
ipripinterface..............................................................13
ipripneighbor-restrict...................................................14
ipripnotifydefaultroute................................................15
ipriponly-send-subnet..................................................15
ipriporiginatedefaultroute............................................16
ipripreceiveversion......................................................16
ipripsendversion.........................................................17
ipsplit-horizon..............................................................17
maximum-paths............................................................18
neighbor......................................................................18
network.......................................................................19
offset-list......................................................................20
output-delay.................................................................20
redistribute...................................................................21
routerrip.....................................................................22
showiprip...................................................................22
showipripdatabase......................................................23
showipripinterface......................................................23
showipripneighbors.....................................................24

showipripnetworks......................................................24
timersbasic..................................................................25
validate-update-source...................................................26
version.........................................................................26
OSPFProtocol.................................................29
areaauthentication........................................................30
arealter-list................................................................31
areanssa.....................................................................31
arearange....................................................................33
areasham-link..............................................................34
areastub.....................................................................36
areastub-host..............................................................37
areavirtual-link.............................................................38
auto-cost......................................................................40
bfd-all-interface............................................................40
capabilityopaque..........................................................41
capabilityvrf-lite...........................................................41
clearipospfprocess......................................................42
clearipospfredistribution..............................................42
compatiblerfc1583........................................................42
debug..........................................................................43
default-metric...............................................................43
disablearea..................................................................44
disableinterface............................................................44
disableipospf...............................................................45
distanceospf................................................................45
distribute-list................................................................46
domain-id.....................................................................47
domain-tag...................................................................48
enablearea..................................................................48
enableinterface............................................................49
enableipospf...............................................................49
fast-reroutealternate-protect-type..................................50
lter............................................................................50
grace-period.................................................................51
ipospfauthentication.....................................................52
ipospfauthentication-key..............................................52
ipospfbfd....................................................................53
ipospfcost...................................................................53
ipospfdead-interval......................................................54

ipospffast-reroute........................................................55
ipospfhello-interval......................................................55
ipospfmessage-digest-key............................................56
ipospfmtu-ignore.........................................................56
ipospfnetwork.............................................................57
ipospfpriority..............................................................58
ipospfresync-timer.......................................................58
ipospfretransmit-interval..............................................59
ipospftransmit-delay....................................................59
maximum-paths............................................................60
max-metricrouter-lsa....................................................60
mplstrafc-engarea......................................................61
mplstrafc-engrouter-id................................................62
neighbor......................................................................62
network.......................................................................63
noarea........................................................................65
notifydefaultroute........................................................65
nsf..............................................................................66
passive-interface...........................................................67
redistribute...................................................................67
routerospf...................................................................69
router-id......................................................................70
showipospf.................................................................70
showipospfborder-lfas.................................................72
showipospfborder-routers............................................73
showipospfdatabase....................................................74
showipospfinterface....................................................84
showipospfmplstrafc-englink.....................................86
showipospfneighbor....................................................87
showipospfnsf............................................................89
showipospfrequest-list.................................................90
showipospfretransmission-list.......................................91
showipospfvirtual-links................................................91
summary-address..........................................................92
timerslsa-group-pacing.................................................93
timersspf.....................................................................93
IS-ISProtocol.................................................95
area............................................................................96
authentication...............................................................96
authentication-type.......................................................97

default-informationoriginate...........................................97
disable.........................................................................98
disable-snp-authentication..............................................99
distance.......................................................................99
enable.........................................................................99
enable-snp-authentication............................................100
fast-reroute................................................................100
hellopadding..............................................................101
hostname...................................................................101
ignore-lsp-errors.........................................................102
iprouterisis...............................................................102
isisauthentication.......................................................103
isisauthentication-type................................................103
isisbfd-enable............................................................104
isiscircuit-type............................................................104
isiscsnp-interval.........................................................105
isishello-interval.........................................................105
isishello-multiplier......................................................106
isisignore-mtu............................................................106
isislsp-interval............................................................107
isisipv6metric............................................................107
isismax-burst.............................................................108
isismtu......................................................................108
isismesh-group..........................................................109
isismetric..................................................................109
isispriority.................................................................110
isispsnp-interval.........................................................110
isisrestart..................................................................111
is-type.......................................................................111
i-spf..........................................................................112
lsp-refresh-time..........................................................112
lsp-mtu......................................................................113
max-lsp-lifetime..........................................................113
maximum-paths..........................................................114
metric-style................................................................114
mplstrafc-eng...........................................................115
passive-interface.........................................................115
redistribute.................................................................116
restart.......................................................................116
routerisis...................................................................117

router-leak.................................................................118
set-overload-bit..........................................................118
showisisadjacency.....................................................119
showisiscircuits.........................................................121
showisisdatabase.......................................................122
showisisfast-reroute-topology......................................124
showisishostname......................................................124
showisismesh-groups.................................................125
showisisnsf...............................................................125
showisistopology.......................................................126
spf-interval.................................................................127
summary-address........................................................127
system-id...................................................................128

AboutThisManual
PurposeThismanualprovidesproceduresandguidelinesthatsupportthe
operationofZXR10routerandEthernetswitch.
Intended
Audience
Thismanualisintendedforengineersandtechnicianswhoperform
operationactivitiesonZXR10routerandEthernetswitch.
WhatIsinThis
Manual
Thismanualcontainsthefollowingchapters:
ChapterSummary
Chapter1,Command
Introduction
Thischapterdescribestheusemethod
ofthecommandmanual,command
description,formatconvention,auxiliary
functionandmode.
Chapter2,RIPProtocolThischapterdescribescommandsofRIP
protocol.
Chapter3,OSPFProtocolThischapterdescribescommandsofOSPF
protocol.
Chapter4,IS-ISProtocolThischapterdescribescommandsofIS-IS
protocol.
Related
Documentation
Thefollowingdocumentationisrelatedtothismanual:
�ZXR10Router/EthernetSwitchCommandManual(Command
IndexVolume)
�ZXR10Router/EthernetSwitchCommandManual(Ethernet
SwitchVolume)
�ZXR10Router/EthernetSwitchCommandManual(BasicCon-
gurationVolumeI)
�ZXR10Router/EthernetSwitchCommandManual(BasicCon-
gurationVolumeII)
�ZXR10Router/EthernetSwitchCommandManual(BasicCon-
gurationVolumeIII)
�ZXR10Router/EthernetSwitchCommandManual(RemoteAc-
cessVolume)
�ZXR10Router/EthernetSwitchCommandManual(IPv4Rout-
ingVolumeII)
�ZXR10Router/EthernetSwitchCommandManual(MPLSVol-
ume)
�ZXR10Router/EthernetSwitchCommandManual(QoSVol-
ume)
�ZXR10Router/EthernetSwitchCommandManual(Security
Volume)
�ZXR10Router/EthernetSwitchCommandManual(Network
ManagementVolume)
CondentialandProprietaryInformationofZTECORPORATIONi

ZXR10CommandManual(IPv4RoutingVolumeI)
�ZXR10Router/EthernetSwitchCommandManual(Multicast
Volume)
�ZXR10Router/EthernetSwitchCommandManual(IPv6Vol-
ume)
�ZXR10Router/EthernetSwitchCommandManual(Voiceand
VideoServiceVolume)
iiCondentialandProprietaryInformationofZTECORPORATION

Chapter1
CommandIntroduction
TableofContents
ManualUseGuide...............................................................1
DescriptionofMan-MachineCommands.................................1
AuxiliaryFunction...............................................................2
CommandMode.................................................................3
ManualUseGuide
Thecommandsinothervolumesareclassiedbyfunctionalmod-
ules,andeachfunctionalmodulecorrespondstoachapterand
thecommandsinthechapterareorganizedintheformoflevel2
directoryandintheorderofa–z.
Tosearchacommand,doasfollows:
1.FindthedesiredcommandbyreferringtoZXR10Router/Eth-
ernetSwitchCommandManual—CommandIndex.
2.Findcommanddetailsbythevolume,chapter/sectionandpage
oftheobtainedcommand.
DescriptionofMan-Machine
Commands
EachMMLcommandisdescribedbythefollowingitems:
�Function
Itdescribesthefunctionimplementedbythiscommand.
�CommandMode
Itdescribesthemodeinwhichthiscommandcanbeexecuted.
�Format
Itdescribesthecompleteformatofthiscommand,including
thenoformatifpossible.
�ParameterDescription
Itdescribesparametersinthiscommandintheformandpre-
scribestherangeanddefaultvalue.Ifdifferentproductshave
CondentialandProprietaryInformationofZTECORPORATION1

ZXR10CommandManual(IPv4RoutingVolumeI)
differentparameterrangesordefaultvalues,anadditional
formisusedfordescription.
�Default
Thedefaultvalueisavailableinthecasethatthiscommandis
notset.Thedefaultparametervalueisnotdescribedherefor
valueselection.
Additionaldescriptionshallbegivenifdifferentproductshave
differentdefaultvalues.
�Instructions
Firstdescribestheplatformversioninformationaboutthis
command.Forexample,“TheplatformversionX.X.XXorlater
supportsthiscommand”indicatesthiscommandisprovided
fromthebeginningoftheplatformversionX.X.XX.Thiscom-
mandisprovidedfromtheplatformversion2.6bydefault.
Seconddescribestheusemethodandprecautionsofthiscom-
mand.
�Example
Itdescribestheuseofthiscommandinanexample.
�RelatedCommands
Liststhecommand(s)relatedtothiscommand.
�HistoryCommand
Itdescribeshistoryversioninformationrelatedtothiscom-
mandifacommandischangedafterversionupgrade.
Donotdescribethehistorycommandifthisentrydoesnotexist.
AuxiliaryFunction
TheauxiliaryfunctionforZXR10devicesisasfollows.
1.Inanycommandmode,enteraquestionmark(?)afterthe
DOSpromptofthesystem,alistofavailablecommandsinthe
commandmodewillbedisplayed.Withthecontext-sensitive
helpfunction,thekeywordsandparameterlistsofanycom-
mandscanbeobtained.
i.Inanycommandmode,enteraquestionmark"?"afterthe
DOSpromptofthesystem,andalistofallcommandsin
themodeandthebriefdescriptionofthecommandswill
bedisplayed.
ii.Inputthequestionmarkbehindacharacterorcharacter
stringtoviewthelistofcommandsorkeywordsbeginning
withthischaracterorcharacterstring.Notethatthereis
nospacebetweenthecharacter(string)andthequestion
mark.
iii.PressTABbehindthecharacterstring.Ifthecommandor
keywordbeginningwiththischaracterstringisunique,it
shallbecompletedwithaspaceattheend.Notethatthere
isnospacebetweenthecharacterstringandtheTAB.
2CondentialandProprietaryInformationofZTECORPORATION

Chapter1CommandIntroduction
iv.Inputaquestionmarkafteracommand,akeywordora
parameter ,thenextkeywordorparametertobeinputwill
belisted,andalsoabriefexplanationwillbegiven.Note
thataspacemustbeenteredbeforethequestionmark.
2.Ifincorrectcommand,keywordorparameterisinput,theerror
isolationisofferedwith^intheuserinterfaceafteryoupress
ENTER.The^isbelowtherstcharacteroftheinputincorrect
command,keywordorparameter .
3.ZXR10router/Ethernetswitchallowsthecommandorkey-
wordtobeabbreviatedintoacharacterorcharacterstringthat
uniquelyidentiesthiscommandorkeyword.Forexample,the
showcommandcanbeabbreviatedtoshorsho.
4.Theuserinterfacesupportsthefunctionofrecordinginput
commands.Amaximumoftenhistorycommandscanbe
recorded.Thefunctionisveryusefulinre-invocationofalong
orcomplicatedcommandoringress.
Tore-invokeacommandfromtherecordbuffer ,conductone
ofthefollowingoperations,asshownbelow.
CommandFunction
PressCTRL-Porthe
uparrowkey
Re-invokesthelatestcommandinthe
recordbuffer .Repeatthesekeysto
invokeoldcommandsforwards.
PressCTRL-Northe
downarrowkey
Rollsthecommandsdownward.Whenthe
lastcommandlineisreached,onemore
operationwillrollthecommandsfromthe
beggingofthebuffercyclically.
Inanymode,executetheshowhistorycommandtolistthe
latestcommandsinputinthismode.
CommandMode
Thecommandmodesinthismanualareshownbelow.
ModePromptAdmis-
sion
Mode
Entry
Command
Functions
Exec
mode
ZXR10>entersdirectly
afterlogging
thesystem
Viewssimple
information
Privi-
leged
mode
ZXR10#Exec
mode
enableCongures
system
parameters
Global
cong-
uration
mode
ZXR10(config)#Privi-
leged
mode
configure
terminal
Congures
globalservice
parameters
CondentialandProprietaryInformationofZTECORPORATION3

ZXR10CommandManual(IPv4RoutingVolumeI)
ModePromptAdmis-
sion
Mode
Entry
Command
Functions
Inter-
face
cong-
uration
mode
ZXR10(config-
if)#Global
cong-
uration
mode
interfaceCongures
port
parameters
andselects
aporttype
dependingon
thekeyword
Subin-
terface
mode
ZXR10(config-
subif)#Global
cong-
uration
mode
interfaceCongures
subinterface
parameters
ofthe
NPCI/NPCT
VLAN
data-
base
cong-
uration
mode
ZXR10(vlan-
db)#Privi-
leged
mode
vlandatab
ase
Createsor
deletesVLANs
inbatches
VLAN
cong-
uration
mode
ZXR10(config-
vlan)#Global
cong-
uration
mode
vlanCongures
VLAN
parameters
MSTP
cong-
uration
mode
ZXR10(config-
mstp)#Global
cong-
uration
mode
spanning-t
reemstconf
iguration
Congures
MSTP
parameters
Basic
ACL
cong-
uration
mode
ZXR10(config-
basic-acl)#Global
cong-
uration
mode
aclbasicDenesbasic
ACLrule
Ex-
tended
ACL
cong-
uration
mode
ZXR10(config-
ext-acl)#Global
cong-
uration
mode
aclextendDenes
extendedACL
rule
Line
cong-
uration
mode
ZXR10(config-
line)#Global
cong-
uration
mode
lineconsole
0
line<1~64
>(GAR)
Congures
parameters
relatedto
serialport
andtelnet
connection
Layer
2ACL
cong-
uration
mode
ZXR10(config-
link-acl)#Global
cong-
uration
mode
acllinkDeneslayer
2ACLrule
4CondentialandProprietaryInformationofZTECORPORATION

Chapter1CommandIntroduction
ModePromptAdmis-
sion
Mode
Entry
Command
Functions
Hybrid
ACL
cong-
uration
mode
ZXR10(config-
hybd-acl)#Global
cong-
uration
mode
aclhybridDeneshybrid
ACLrule
Router
stand-
ardACL
mode
ZXR10(config-
std-nacl)#Global
cong-
uration
mode
ipaccess-listDenesrouter
standardACL
rule
Router
ex-
tended
ACL
mode
ZXR10(config-
ext-nacl)#Global
cong-
uration
mode
ipaccess-listDenesrouter
extendedACL
rule
routerripCongures
RIP
parameters
routerospfCongures
OSPF
parameters
routerisisCongures
IS-IS
parameters
routerbgpCongures
BGP
parameters
router
pimsm
Congures
PIM-SM
parameters
ipv6router
rip
Congures
RIPng
parameters.
Route
cong-
uration
mode
ZXR10(config-
router)#Global
cong-
uration
mode
ipv6router
ospf
Congures
OSPFv3
parameters
VRF
cong-
uration
mode
ZXR10(config-
vrf)#Global
cong-
uration
mode
ipvrfCongures
VRF
parameters
VFIcon-
gu-
ration
mode
ZXR10(config-
vfi)#Global
cong-
uration
mode
vfiCongures
VPLSrelated
parameters
CondentialandProprietaryInformationofZTECORPORATION5

ZXR10CommandManual(IPv4RoutingVolumeI)
ModePromptAdmis-
sion
Mode
Entry
Command
Functions
Route
cong-
uration
mode
(RIP)
address-fam
ilyipv4vrf
Congures
RIPVRF
parameters
IPv4ad-
dress
family
cong-
uration
mode
ZXR10(config-
router-af)#
Route
cong-
uration
mode
(BGP)
address-fam
ilyvpnv4
address-fam
ilyipv4vrf
Congures
BGPVPN
andVRF
parameters
Route
cong-
uration
mode
(BGP4+)
address-fam
ilyipv6
Congures
BGP4+
unicast
addressfamily
IPv6
unicast
address
family
cong-
uration
mode
ZXR10(config-
router-af)#
Route
cong-
uration
mode
(IS-
ISv6)
address-fam
ilyipv6
Congures
IS-ISv6
addressfamily
Route
map
cong-
uration
mode
ZXR10(config-
route-map)#Global
cong-
uration
mode
route-mapCongures
routemap
matchingitem
andoperation
Channe-
lization
cong-
uration
mode
ZXR10(config-
control)#Global
cong-
uration
mode
controlCongures
channelization
force1,ce3
andcpos3
Dial
peer
cong-
uration
mode
ZXR10(config-
voip100)#Global
cong-
uration
mode
dial-peer
voice
Congures
business
relatedto
integrated
service
Voice
port
cong-
uration
mode
ZXR10(config-
voice-port)#Global
cong-
uration
mode
voice-portCongures
voiceservice
IPSec
cong-
uration
mode
ZXR10(config-
ipsec)#Global
cong-
uration
mode
ipsecCongures
IPv6IPSec
protection
Diagno-
sismode
ZXR10(diag)#Privi-
leged
mode
diagnoseTestsCPU
andmemory
usage
6CondentialandProprietaryInformationofZTECORPORATION

Chapter2
RIPProtocol
TableofContents
address-familyipv4vrf........................................................7
auto-summary...................................................................8
default-metric....................................................................8
disableinterface.................................................................9
distance............................................................................9
enableinterface................................................................10
exit-address-family............................................................10
ash-update-threshold.......................................................10
ippoison-reverse...............................................................11
ipripauthenticationkey.....................................................11
ipripauthenticationkey-chain............................................12
ipripauthenticationmode..................................................13
ipripinterface..................................................................13
ipripneighbor-restrict.......................................................14
ipripnotifydefaultroute....................................................15
ipriponly-send-subnet......................................................15
ipriporiginatedefaultroute................................................16
ipripreceiveversion..........................................................16
ipripsendversion.............................................................17
ipsplit-horizon..................................................................17
maximum-paths................................................................18
neighbor..........................................................................18
network...........................................................................19
offset-list.........................................................................20
output-delay.....................................................................20
redistribute.......................................................................21
routerrip.........................................................................22
showiprip.......................................................................22
showipripdatabase..........................................................23
showipripinterface..........................................................23
showipripneighbors.........................................................24
showipripnetworks..........................................................24
timersbasic......................................................................25
validate-update-source.......................................................26
version............................................................................26
address-familyipv4vrf
PurposeUsethiscommandtoentertheVRFaddressmodeconguration,
orcreateandenteritifitdoesnotexist.Deletethisaddressmode
withthenocommand.
CondentialandProprietaryInformationofZTECORPORATION7

ZXR10CommandManual(IPv4RoutingVolumeI)
CommandModesRouterconguration
Syntaxaddress-familyipv4vrf<vrf-name>
noaddress-familyipv4vrf<vrf-name>
Syntax
Description<vrf-name>VRFname,1~16characters
DefaultsInvalid
InstructionsTheRIPextensionsupportstheVRFaddressmode.Thecorre-
spondingaddresscongurationmodeshouldbeenteredtocong-
uretheaddressmode.
ExampleThisexampledescribeshowtoenterthevpn1addressmode.
ZXR10(config)#routerrip
ZXR10(config-router)#address-familyipv4vrfvpn1
ZXR10(config-router-af)#
auto-summary
PurposeUsethiscommandtoconguretosendtheroutewhichonlypasses
throughthesummarizednaturenetworkandsupernetworkroutes
(inRIPV2).TosendallRIProutes,usethenocommand.
CommandModesRoutercongurationandaddressfamilyconguration
Syntaxauto-summary
noauto-summary
DefaultsEnable
Instructions�Theroutesummaryreducestherouteinformationvolumeto
besent.
�Evenifthecommandauto-summaryiscongured,Please
mentionthefollowingpolicieswhicharestilleffective:
Routerhasaninterfaceaddressandthisinterfaceaddressin
anaturalnetworksegment,whichisasubnetworksegment
ofRIPprotocol.RIPupdatepacketsendsfromthisinterface
withoutnaturalnetworkrouting,butwithotherRIPsubnet-
workroutings,whichbelongtoadifferentsubnetworkwith
theinterface.
default-metric
PurposeUsethiscommandtore-distributetheotherprotocolgenerated
routesasthedefaultmetricfortheRIProute.T orestoredefault,
usethenocommand.
CommandModesRoutercongurationandaddressfamilyconguration
Syntaxdefault-metric<metric-value>
nodefault-metric
8CondentialandProprietaryInformationofZTECORPORATION

Chapter2RIPProtocol
Syntax
Description<metric-value>Defaultmetricvalue,range:1~16,default:1
DefaultsThedefaultvalueis1.
InstructionsThiscommandworkswiththeredistributecommandtohave
thesamemetricvalueusedforthecurrentroutingprotocoland
allre-distributingroute.Thedefaultmetrichelpssolvetheroute
re-distributingproblemsthatarecausedbydifferentmetrics.
Whenthemetricisnotchanged,thedefaultmetricprovidesa
reasonablealternativemethodtofacilitatethere-distributing.
Related
Commands
redistribute
disableinterface
PurposeUsethiscommandtodisableaninterface,thatis,disabletheRIP
protocolonthisinterface.
CommandModesRoutercongurationandaddressfamilyconguration
Syntaxdisableinterface<ip-address>
Syntax
Description<ip-address>IPaddressofthespeciedRIPinterface,in
thedotteddecimalformat
DefaultsThiscommandisinvalidbydefault.
InstructionsThiscommanddoesnotchangethecongurationparameterdata-
base,butonlydisablestheRIPprotocolontheinterface.
ExampleThisexampledescribeshowtostoptheRIPprotocolontheinter-
face10.20.1.20.
ZXR10(config)#routerrip
ZXR10(config-router)#disableinterface10.20.1.20
Related
Commands
enableinterface
distance
PurposeUsethiscommandtoconguretheroutepriorityoftheIS-IS.Re-
storethedefaultIS-ISrouteprioritywiththenocommand.
CommandModesRouterconguration
Syntaxdistance<distance>
nodistance
Syntax
Description<distance>PriorityoftheIS-ISroute,range:1~255,
default:115
InstructionsThiscommandfunctionsonbothlevel-1andlevel-2.
CondentialandProprietaryInformationofZTECORPORATION9

ZXR10CommandManual(IPv4RoutingVolumeI)
ExampleThisexampledescribeshowtoconguretheroutepriorityofthe
IS-IS.
ZXR10(config)#routerisis
ZXR10(config-router)#distance120
enableinterface
PurposeUsethiscommandtostarttheRIPprotocolonaninterface.
CommandModesRoutercongurationandaddressfamilyconguration
Syntaxenableinterface<ip-address>
Syntax
Description<ip-address>IPaddressofthespeciedRIPinterface,in
thedotteddecimalnotation.
DefaultsThiscommandisenabledbydefault.
InstructionsThiscommanddoesnotchangethecongurationparameterdata-
base.
ExampleThisexampledescribeshowtostarttheRIPprotocolontheinter-
face10.20.1.20.
ZXR10(config)#routerrip
ZXR10(config-router)#enableinterface10.20.1.20
Related
Commands
disableinterface
exit-address-family
PurposeUsethiscommandtoexitRIPVRFaddressmodeconguration.
CommandModesRouteraddress
Syntaxexit-address-family
ExampleThisexampledescribeshowtostarttheRIPprotocolontheinter-
face10.20.1.20.
ZXR10(config)#routerrip
ZXR10(config-router)#address-familyipv4vrfvpn1
ZXR10(config-router-af)#exit-address-family
ZXR10(config-router)#
Related
Commands
address-familyipv4vrf
flash-update-threshold
PurposeUsethiscommandtodenetheRIPashtimer .Restoredefault
withthenocommand.
10CondentialandProprietaryInformationofZTECORPORATION