Zte ZXR10 3800-8 Installation instructions

ZXR10
Router/EthernetSwitch
CommandManual(VoiceandVideoServiceVolume)
Version4.8.22
ZTECORPORATION
ZTEPlaza,KejiRoadSouth,
Hi-TechIndustrialPark,
NanshanDistrict,Shenzhen,
P .R.China
518057
Tel:[phone]
Fax:[phone]
URL:http://ensupport.zte.com.cn
E-mail:[email protected]

LEGALINFORMATION
Copyright©2006ZTECORPORATION.
Thecontentsofthisdocumentareprotectedbycopyrightlawsandinternationaltreaties.Anyreproductionordistributionof
thisdocumentoranyportionofthisdocument,inanyformbyanymeans,withoutthepriorwrittenconsentofZTECORPO-
RATIONisprohibited.Additionally,thecontentsofthisdocumentareprotectedbycontractualcondentialityobligations.
Allcompany,brandandproductnamesaretradeorservicemarks,orregisteredtradeorservicemarks,ofZTECORPORATION
oroftheirrespectiveowners.
Thisdocumentisprovided“asis” ,andallexpress,implied,orstatutorywarranties,representationsorconditionsaredis-
claimed,includingwithoutlimitationanyimpliedwarrantyofmerchantability,tnessforaparticularpurpose,titleornon-in-
fringement.ZTECORPORATIONanditslicensorsshallnotbeliablefordamagesresultingfromtheuseoforrelianceonthe
informationcontainedherein.
ZTECORPORATIONoritslicensorsmayhavecurrentorpendingintellectualpropertyrightsorapplicationscoveringthesubject
matterofthisdocument.ExceptasexpresslyprovidedinanywrittenlicensebetweenZTECORPORATIONanditslicensee,
theuserofthisdocumentshallnotacquireanylicensetothesubjectmatterherein.
ZTECORPORATIONreservestherighttoupgradeormaketechnicalchangetothisproductwithoutfurthernotice.
UsersmayvisitZTEtechnicalsupportwebsitehttp://ensupport.zte.com.cntoinquirerelatedinformation.
TheultimaterighttointerpretthisproductresidesinZTECORPORATION.
RevisionHistory
RevisionNo.RevisionDateRevisionReason
R1.0Dec.28,2008FirstEdition
SerialNumber:sjzl20086540

AboutThisManual..............................................i
CommandIntroduction.....................................1
ManualUseGuide...........................................................1
DescriptionofMan-MachineCommands.............................1
AuxiliaryFunction...........................................................2
CommandMode.............................................................3
VOIPConguration...........................................7
cancel-truncate..............................................................7
clearcall-history.............................................................8
codec............................................................................8
comfort-noise................................................................9
description....................................................................9
destination-pattern........................................................10
dial-peervoice..............................................................10
dtmfthreshold..............................................................11
echo-cancel..................................................................11
echo-cancelcoverage-time.............................................12
fast-connect.................................................................12
gateway.......................................................................13
h323-description...........................................................13
h323-gatewayvoipgw-id...............................................13
h323-gatewayvoipid.....................................................14
h323-gatewayvoipinterface...........................................14
h323-gatewayvoiptech-prex........................................15
inputgain.....................................................................15
jitter-buffer..................................................................16
num-exp......................................................................16
outputgain...................................................................17
port.............................................................................17
prex...........................................................................18
ringnumber..................................................................18
sessiontarget...............................................................19
showcall-history...........................................................19
showdial-peervoice......................................................19
showgateway...............................................................20
shownum-exp..............................................................20
showvoice-port.............................................................20
shutdowndial-peer...................................................21

shutdownvoice-port..................................................21
timeouts......................................................................22
vad..............................................................................22
voice-port.....................................................................23
IPTVConguration..........................................25
cleariptvcac-rule..........................................................25
cleariptvchannel..........................................................26
cleariptvclient.............................................................26
createiptvcac-rule........................................................27
createiptvchannel........................................................27
iptvcac-rulename.........................................................28
iptvcac-ruleprvcount....................................................28
iptvcac-ruleprvinterval.................................................29
iptvcac-ruleprvtime......................................................29
iptvcac-ruleright..........................................................30
iptvchannelmvlan........................................................31
iptvchannelname.........................................................31
iptvcontrol...................................................................31
iptvcontrollogin-time....................................................32
iptvcontrolprvcountcount.............................................32
iptvcontrolprvcountreset-period....................................33
iptvcontrolprvinterval...................................................33
iptvcontrolprvtime.......................................................34
showiptvcac-rule.........................................................34
showiptvcac-rulestatistics............................................36
showiptvchannel..........................................................37
showiptvchannelstatistics.............................................38
showiptvclient.............................................................39
showiptvclientstatistics................................................41
showiptvcontrol...........................................................41

AboutThisManual
PurposeThismanualprovidesproceduresandguidelinesthatsupportthe
operationofZXR10routerandEthernetswitch.
Intended
Audience
Thismanualisintendedforengineersandtechnicianswhoperform
operationactivitiesonZXR10routerandEthernetswitch.
WhatIsinThis
Manual
Thismanualcontainsthefollowingchapters:
ChapterSummary
Chapter1,Command
Introduction
Thischapterdescribestheusemethod
ofthecommandmanual,command
description,formatconvention,auxiliary
functionandmode.
Chapter2,VOIP
Conguration
Thischapterdescribestheconguration
andviewcommandsofVOIP .
Chapter3,IPTVControl
Conguration
Thischapterdescribestheconguration
andviewcommandsoftheIPTV .
Related
Documentation
Thefollowingdocumentationisrelatedtothismanual:
�ZXR10Router/EthernetSwitchCommandManual(Command
IndexVolume)
�ZXR10Router/EthernetSwitchCommandManual(Ethernet
SwitchVolume)
�ZXR10Router/EthernetSwitchCommandManual(BasicCon-
gurationVolumeI)
�ZXR10Router/EthernetSwitchCommandManual(BasicCon-
gurationVolumeII)
�ZXR10Router/EthernetSwitchCommandManual(BasicCon-
gurationVolumeIII)
�ZXR10Router/EthernetSwitchCommandManual(RemoteAc-
cessVolume)
�ZXR10Router/EthernetSwitchCommandManual(IPv4Rout-
ingVolumeI)
�ZXR10Router/EthernetSwitchCommandManual(IPv4Rout-
ingVolumeII)
�ZXR10Router/EthernetSwitchCommandManual(MPLSVol-
ume)
�ZXR10Router/EthernetSwitchCommandManual(QoSVol-
ume)
�ZXR10Router/EthernetSwitchCommandManual(Security
Volume)
�ZXR10Router/EthernetSwitchCommandManual(Network
ManagementVolume)
CondentialandProprietaryInformationofZTECORPORATIONi

ZXR10CommandManual(VoiceandVideoServiceVolume)
�ZXR10Router/EthernetSwitchCommandManual(Multicast
Volume)
�ZXR10Router/EthernetSwitchCommandManual(IPv6Vol-
ume)
iiCondentialandProprietaryInformationofZTECORPORATION

Chapter1
CommandIntroduction
TableofContents
ManualUseGuide...............................................................1
DescriptionofMan-MachineCommands.................................1
AuxiliaryFunction...............................................................2
CommandMode.................................................................3
ManualUseGuide
Thecommandsinothervolumesareclassiedbyfunctionalmod-
ules,andeachfunctionalmodulecorrespondstoachapterand
thecommandsinthechapterareorganizedintheformoflevel2
directoryandintheorderofa–z.
Tosearchacommand,doasfollows:
1.FindthedesiredcommandbyreferringtoZXR10Router/Eth-
ernetSwitchCommandManual—CommandIndex.
2.Findcommanddetailsbythevolume,chapter/sectionandpage
oftheobtainedcommand.
DescriptionofMan-Machine
Commands
EachMMLcommandisdescribedbythefollowingitems:
�Function
Itdescribesthefunctionimplementedbythiscommand.
�CommandMode
Itdescribesthemodeinwhichthiscommandcanbeexecuted.
�Format
Itdescribesthecompleteformatofthiscommand,including
thenoformatifpossible.
�ParameterDescription
Itdescribesparametersinthiscommandintheformandpre-
scribestherangeanddefaultvalue.Ifdifferentproductshave
CondentialandProprietaryInformationofZTECORPORATION1

ZXR10CommandManual(VoiceandVideoServiceVolume)
differentparameterrangesordefaultvalues,anadditional
formisusedfordescription.
�Default
Thedefaultvalueisavailableinthecasethatthiscommandis
notset.Thedefaultparametervalueisnotdescribedherefor
valueselection.
Additionaldescriptionshallbegivenifdifferentproductshave
differentdefaultvalues.
�Instructions
Firstdescribestheplatformversioninformationaboutthis
command.Forexample,“TheplatformversionX.X.XXorlater
supportsthiscommand”indicatesthiscommandisprovided
fromthebeginningoftheplatformversionX.X.XX.Thiscom-
mandisprovidedfromtheplatformversion2.6bydefault.
Seconddescribestheusemethodandprecautionsofthiscom-
mand.
�Example
Itdescribestheuseofthiscommandinanexample.
�RelatedCommands
Liststhecommand(s)relatedtothiscommand.
�HistoryCommand
Itdescribeshistoryversioninformationrelatedtothiscom-
mandifacommandischangedafterversionupgrade.
Donotdescribethehistorycommandifthisentrydoesnotexist.
AuxiliaryFunction
TheauxiliaryfunctionforZXR10devicesisasfollows.
1.Inanycommandmode,enteraquestionmark(?)afterthe
DOSpromptofthesystem,alistofavailablecommandsinthe
commandmodewillbedisplayed.Withthecontext-sensitive
helpfunction,thekeywordsandparameterlistsofanycom-
mandscanbeobtained.
i.Inanycommandmode,enteraquestionmark"?"afterthe
DOSpromptofthesystem,andalistofallcommandsin
themodeandthebriefdescriptionofthecommandswill
bedisplayed.
ii.Inputthequestionmarkbehindacharacterorcharacter
stringtoviewthelistofcommandsorkeywordsbeginning
withthischaracterorcharacterstring.Notethatthereis
nospacebetweenthecharacter(string)andthequestion
mark.
iii.PressTABbehindthecharacterstring.Ifthecommandor
keywordbeginningwiththischaracterstringisunique,it
shallbecompletedwithaspaceattheend.Notethatthere
isnospacebetweenthecharacterstringandtheTAB.
2CondentialandProprietaryInformationofZTECORPORATION

Chapter1CommandIntroduction
iv.Inputaquestionmarkafteracommand,akeywordora
parameter ,thenextkeywordorparametertobeinputwill
belisted,andalsoabriefexplanationwillbegiven.Note
thataspacemustbeenteredbeforethequestionmark.
2.Ifincorrectcommand,keywordorparameterisinput,theerror
isolationisofferedwith^intheuserinterfaceafteryoupress
ENTER.The^isbelowtherstcharacteroftheinputincorrect
command,keywordorparameter .
3.ZXR10router/Ethernetswitchallowsthecommandorkey-
wordtobeabbreviatedintoacharacterorcharacterstringthat
uniquelyidentiesthiscommandorkeyword.Forexample,the
showcommandcanbeabbreviatedtoshorsho.
4.Theuserinterfacesupportsthefunctionofrecordinginput
commands.Amaximumoftenhistorycommandscanbe
recorded.Thefunctionisveryusefulinre-invocationofalong
orcomplicatedcommandoringress.
Tore-invokeacommandfromtherecordbuffer ,conductone
ofthefollowingoperations,asshownbelow.
CommandFunction
PressCTRL-Porthe
uparrowkey
Re-invokesthelatestcommandinthe
recordbuffer .Repeatthesekeysto
invokeoldcommandsforwards.
PressCTRL-Northe
downarrowkey
Rollsthecommandsdownward.Whenthe
lastcommandlineisreached,onemore
operationwillrollthecommandsfromthe
beggingofthebuffercyclically.
Inanymode,executetheshowhistorycommandtolistthe
latestcommandsinputinthismode.
CommandMode
Thecommandmodesinthismanualareshownbelow.
ModePromptAdmis-
sion
Mode
Entry
Command
Functions
Exec
mode
ZXR10>entersdirectly
afterlogging
thesystem
Viewssimple
information
Privi-
leged
mode
ZXR10#Exec
mode
enableCongures
system
parameters
Global
cong-
uration
mode
ZXR10(config)#Privi-
leged
mode
configure
terminal
Congures
globalservice
parameters
CondentialandProprietaryInformationofZTECORPORATION3

ZXR10CommandManual(VoiceandVideoServiceVolume)
ModePromptAdmis-
sion
Mode
Entry
Command
Functions
Inter-
face
cong-
uration
mode
ZXR10(config-
if)#Global
cong-
uration
mode
interfaceCongures
port
parameters
andselects
aporttype
dependingon
thekeyword
Subin-
terface
mode
ZXR10(config-
subif)#Global
cong-
uration
mode
interfaceCongures
subinterface
parameters
ofthe
NPCI/NPCT
VLAN
data-
base
cong-
uration
mode
ZXR10(vlan-
db)#Privi-
leged
mode
vlandatab
ase
Createsor
deletesVLANs
inbatches
VLAN
cong-
uration
mode
ZXR10(config-
vlan)#Global
cong-
uration
mode
vlanCongures
VLAN
parameters
MSTP
cong-
uration
mode
ZXR10(config-
mstp)#Global
cong-
uration
mode
spanning-t
reemstconf
iguration
Congures
MSTP
parameters
Basic
ACL
cong-
uration
mode
ZXR10(config-
basic-acl)#Global
cong-
uration
mode
aclbasicDenesbasic
ACLrule
Ex-
tended
ACL
cong-
uration
mode
ZXR10(config-
ext-acl)#Global
cong-
uration
mode
aclextendDenes
extendedACL
rule
Line
cong-
uration
mode
ZXR10(config-
line)#Global
cong-
uration
mode
lineconsole
0
line<1~64
>(GAR)
Congures
parameters
relatedto
serialport
andtelnet
connection
Layer
2ACL
cong-
uration
mode
ZXR10(config-
link-acl)#Global
cong-
uration
mode
acllinkDeneslayer
2ACLrule
4CondentialandProprietaryInformationofZTECORPORATION

Chapter1CommandIntroduction
ModePromptAdmis-
sion
Mode
Entry
Command
Functions
Hybrid
ACL
cong-
uration
mode
ZXR10(config-
hybd-acl)#Global
cong-
uration
mode
aclhybridDeneshybrid
ACLrule
Router
stand-
ardACL
mode
ZXR10(config-
std-nacl)#Global
cong-
uration
mode
ipaccess-listDenesrouter
standardACL
rule
Router
ex-
tended
ACL
mode
ZXR10(config-
ext-nacl)#Global
cong-
uration
mode
ipaccess-listDenesrouter
extendedACL
rule
routerripCongures
RIP
parameters
routerospfCongures
OSPF
parameters
routerisisCongures
IS-IS
parameters
routerbgpCongures
BGP
parameters
router
pimsm
Congures
PIM-SM
parameters
ipv6router
rip
Congures
RIPng
parameters.
Route
cong-
uration
mode
ZXR10(config-
router)#Global
cong-
uration
mode
ipv6router
ospf
Congures
OSPFv3
parameters
VRF
cong-
uration
mode
ZXR10(config-
vrf)#Global
cong-
uration
mode
ipvrfCongures
VRF
parameters
VFIcon-
gu-
ration
mode
ZXR10(config-
vfi)#Global
cong-
uration
mode
vfiCongures
VPLSrelated
parameters
CondentialandProprietaryInformationofZTECORPORATION5

ZXR10CommandManual(VoiceandVideoServiceVolume)
ModePromptAdmis-
sion
Mode
Entry
Command
Functions
Route
cong-
uration
mode
(RIP)
address-fam
ilyipv4vrf
Congures
RIPVRF
parameters
IPv4ad-
dress
family
cong-
uration
mode
ZXR10(config-
router-af)#
Route
cong-
uration
mode
(BGP)
address-fam
ilyvpnv4
address-fam
ilyipv4vrf
Congures
BGPVPN
andVRF
parameters
Route
cong-
uration
mode
(BGP4+)
address-fam
ilyipv6
Congures
BGP4+
unicast
addressfamily
IPv6
unicast
address
family
cong-
uration
mode
ZXR10(config-
router-af)#
Route
cong-
uration
mode
(IS-
ISv6)
address-fam
ilyipv6
Congures
IS-ISv6
addressfamily
Route
map
cong-
uration
mode
ZXR10(config-
route-map)#Global
cong-
uration
mode
route-mapCongures
routemap
matchingitem
andoperation
Channe-
lization
cong-
uration
mode
ZXR10(config-
control)#Global
cong-
uration
mode
controlCongures
channelization
force1,ce3
andcpos3
Dial
peer
cong-
uration
mode
ZXR10(config-
voip100)#Global
cong-
uration
mode
dial-peer
voice
Congures
business
relatedto
integrated
service
Voice
port
cong-
uration
mode
ZXR10(config-
voice-port)#Global
cong-
uration
mode
voice-portCongures
voiceservice
IPSec
cong-
uration
mode
ZXR10(config-
ipsec)#Global
cong-
uration
mode
ipsecCongures
IPv6IPSec
protection
Diagno-
sismode
ZXR10(diag)#Privi-
leged
mode
diagnoseTestsCPU
andmemory
usage
6CondentialandProprietaryInformationofZTECORPORATION

Chapter2
VOIPConfiguration
TableofContents
cancel-truncate..................................................................7
clearcall-history.................................................................8
codec................................................................................8
comfort-noise....................................................................9
description........................................................................9
destination-pattern............................................................10
dial-peervoice..................................................................10
dtmfthreshold..................................................................11
echo-cancel......................................................................11
echo-cancelcoverage-time.................................................12
fast-connect.....................................................................12
gateway...........................................................................13
h323-description...............................................................13
h323-gatewayvoipgw-id...................................................13
h323-gatewayvoipid.........................................................14
h323-gatewayvoipinterface...............................................14
h323-gatewayvoiptech-prex............................................15
inputgain.........................................................................15
jitter-buffer......................................................................16
num-exp..........................................................................16
outputgain.......................................................................17
port.................................................................................17
prex...............................................................................18
ringnumber.....................................................................18
sessiontarget...................................................................19
showcall-history...............................................................19
showdial-peervoice..........................................................19
showgateway...................................................................20
shownum-exp..................................................................20
showvoice-port................................................................20
shutdowndial-peer.......................................................21
shutdownvoice-port.....................................................21
timeouts..........................................................................22
vad..................................................................................22
voice-port.........................................................................23
cancel-truncate
PurposeUsethiscommandtocanceltruncatingthecallednumber .Enable
thetruncatingcallednumberfunctionwithnocommand.
CommandModesDial-uppeerconguration
CondentialandProprietaryInformationofZTECORPORATION7

ZXR10CommandManual(VoiceandVideoServiceVolume)
Syntaxcancel-truncate
nocancel-truncate
DefaultsIfthisareaiscongured,itistruncatedbydefault.
Instructions�Thiscommandisonlyappliedtothedial-peerinpotstype.
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
clearcall-history
PurposeUsethiscommandtoclearthecallhistoryinformationofthespec-
iedport.
CommandModesPrivilegedEXEC
Syntaxclearcall-historyvoice-port<voice-port>
Syntax
Description<voice-port>Speciesthevoiceport.
InstructionsItisonlyappliedtoZXR10GARandZXR10ZSR.
codec
PurposeUsethiscommandtocongurethevoicecodingrateofadial-peer .
Restorethedefaultcongurationwiththenocommand.
CommandModesDial-uppeerconguration
Syntaxcodec{g711alaw|g711ulaw|g7231|g729}
nocodec
Syntax
Descriptiong711alawG.711A-law64000bps
g711ulawG.711u-law64000bps
g7231G.723.16300bps
g729G.7298000bps
DefaultsIfthisareaiscongured,thevoicecodingrateofadial-peeris
g729bydefault.
Instructions�Thiscommandisonlyappliedtothedial-peerinvoiptype.
�Themodieddial-peercongurationwilltakeeffectinthenext
dial-up.
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
ExampleThisexampledescribeshowtocongurethevoicecodingrateof
aVOIPdial-peer100asg711alaw.
8CondentialandProprietaryInformationofZTECORPORATION

Chapter2VOIPConguration
ZXR10(config)#dial-peervoice100voip
ZXR10(config-voip100)#codecg711alaw
comfort-noise
PurposeUsethiscommandtoenablethecomfortnoiseconguration.Dis-
ablethefunctionwithnocommand.
CommandModesVoiceportconguration
Syntaxcomfort-noise
nocomfort-noise
Defaultsthecomfortnoisecongurationisenabledbydefault.
Instructions�Whentherelevantdial-peerisconguredwiththemutedetec-
tionfunction,theproperbackgroundnoisewillbegenerated
throughthiscommandtollinthesilentgappinginthecon-
versation.Ifthecomfortnoiseisnotgenerated,thesilent
gappingintheconversationwilldiscomfortthecaller/callee.
�Themodiedvoiceportcongurationwilltakeeffectinthenext
dial-up.
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
ExampleThisexampledescribeshowtoenablethecomfortnoiseonport
voice_3/1.
ZXR10(config)#voice-portvoice_3/1
ZXR10(config-voice-port)#comfort-noise
description
PurposeUsethiscommandtocongurethevoiceportdescriptor .Delete
thedescriptionswiththenocommand.
CommandModesVoiceportconguration
Syntaxdescription<string>
nodescription
Syntax
Description<string>Voiceportdescriptor ,notmorethan64
characters
InstructionsItisonlyappliedtoZXR10GARandZXR10ZSR.
ExampleThisexampledescribeshowtocongurethedescriptor“zxr10
voiceport”forportvoice_3/1.
ZXR10(config)#voice-portvoice_3/1
ZXR10(config-voice-port)#descriptionzxr10voiceport
CondentialandProprietaryInformationofZTECORPORATION9

ZXR10CommandManual(VoiceandVideoServiceVolume)
destination-pattern
PurposeUsethiscommandtocongurethephonenumberassociatedwith
thedial-peer .Cancelthecongurationwiththenocommand.
CommandModesDial-uppeerconguration
Syntaxdestination-pattern<phone-number>
nodestination-pattern
Syntax
Description<phone-number>SpeciestheE.164phonenumber .
Instructions�Thepermittedphonenumbercharactersinclude“0~9”,“#”,
“*”and“.”.
�Thephonenumberlengthshouldnotbelongerthan30.
�Thiscommandisonlyappliedtothedial-peerinvoiporpots
type.
�Themodieddial-peercongurationwilltakeeffectinthenext
dial-up.
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
ExampleThisexampledescribeshowtocongurethephonenumber
0251111forpeer1inpotstype.
ZXR10(config)#dial-peervoice1pots
ZXR10(config-pots1)#destination-pattern0251111
dial-peervoice
PurposeUsethiscommandtocreatethedial-peerorenterthespecied
dial-peercongurationmode.Deletethespecieddial-peerwith
thenocommand.
CommandModesGlobalconguration
Syntaxdial-peervoice<peer-number>{pots|voip}
nodial-peervoice<peer-number>
Syntax
Description<peer-number>Dial-uppeernumber ,intherangeof1~65535
{pots|voip}Dial-uppeertype,potsorvoip
Instructions�Createupto512dial-peersatmost.
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
Example�Thisexampledescribeshowtocreatedial-peer1inpotstype.
ZXR10(config)#dial-peervoice1pots
ZXR10(config-pots1)#
10CondentialandProprietaryInformationofZTECORPORATION

Chapter2VOIPConguration
�Thisexampledescribeshowtocreatedial-peer100invoip
type.
ZXR10(config)#dial-peervoice100voip
ZXR10(config-voip100)#
dtmfthreshold
PurposeUsethiscommandtoconguretheenergythresholdtoreceivethe
DTMFcode.Restorethedefaultwiththenocommand.
CommandModesVoiceportconguration
Syntaxdtmfthreshold<dtmf-value>
nodtmfthreshold
Syntax
Description<dtmf-value>EnergythresholdtoreceivetheDTMFcode,
intherangeof0~300,300bydefault.
Instructions�Themodiedvoiceportcongurationwilltakeeffectinthenext
dial-up.
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
ExampleThisexampledescribeshowtosettheenergythresholdto200,
whichisusedforreceivingtheDTMFcodeonportvoice_3/1.
ZXR10(config)#voice-portvoice_3/1
ZXR10(config-voice-port)#dtmfthreshold200
echo-cancel
PurposeUsethiscommandtocongurewhethertheechocancellationfunc-
tionwillbeused.Disablethefunctionwiththenocommand.
CommandModesVoiceportconguration
Syntaxecho-cancelenable
noecho-cancelenable
Defaultstheechocancellationfunctionisenabledbydefault.
Instructions�Theconguredcoverage-timewillnottakeeffectiftheecho
cancellationfunctioniscancelled.
�Themodiedvoiceportcongurationwilltakeeffectinthenext
dial-up.
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
ExampleThisexampledescribeshowtoconguretheechocancellation
functiononportvoice_3/1.
ZXR10(config)#voice-portvoice_3/1
ZXR10(config-voice-port)#echo-cancelenable
CondentialandProprietaryInformationofZTECORPORATION11

ZXR10CommandManual(VoiceandVideoServiceVolume)
echo-cancelcoverage-time
PurposeUsethiscommandtoconguretheechocancellationsampling
timelength.Restorethedefaultvaluewithnocommand.
CommandModesVoiceportconguration
Syntaxecho-cancelcoverage-time<coverage-time>
noecho-cancelcoverage-time
Syntax
Description<coverage-time>Adjuststheechocancellationsamplingtime
length(unit:millisecond),intherangeof
8~128.Steplengthis8milliseconds,48
millisecondsbydefault
Instructions�Theconguredcoverage-timewillnottakeeffectistheecho
cancellationfunctioniscancelled.
�Themodiedvoiceportcongurationwilltakeeffectinthenext
dial-up.
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
ExampleThisexampledescribeshowtoconguretheechocancellation
samplingtimelengthonthevoice_3/1portas16.
ZXR10(config)#voice-portvoice_3/1
ZXR10(config-voice-port)#echo-cancelcoverage-time16
fast-connect
PurposeUsethiscommandtoenablethecallfastconnectionfunction.Dis-
ablethefunctionwiththenocommand.
CommandModesDial-uppeerconguration
Syntaxfast-connect
nofast-connect
DefaultsThiscommandisdisabledbydefault.
Instructions�Thiscommandisonlyappliedtothedial-peerinVOIPtype.
�Themodieddial-peercongurationwilltakeeffectinthenext
dial-up.
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
ExampleThisexampledescribeshowtocongurethedial-peer100inVOIP
typetoenablethefastconnection.
ZXR10(config)#dial-peervoice100voip
ZXR10(config-voip100)#fast-connect
12CondentialandProprietaryInformationofZTECORPORATION

Chapter2VOIPConguration
gateway
PurposeUsethiscommandtoactivatetheGKClientfunction.Disablethe
GKClientfunctionwiththenocommand.
CommandModesGlobalconguration
Syntaxgateway
nogateway
DefaultsIfthisareaiscongured,itisdisabledbydefault.
Instructions�OnlywhentheGKClientisactivated,theroutervoicegateway
cannormallycommunicatewiththeGKServer;otherwise,the
voicegatewaycannotbeconnectedwiththeGKServer .
�Thegatewaycommandcanbeexecutedsuccessfullyonly
whentheh323-gatewayvoipinterfacecommandisexe-
cutedandaninterfaceisconguredastheH.323gateway
interface.Meanwhile,ifthegatewayinterfaceisspecied
againorthegateway-relatedparametersaremodied,the
gatewaycommandwillbeusedtoactivatetheGKClient
functionagainsothattheinformationabouttheGKClient
savedintheGKServercanbeupdatedintime.
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
h323-description
PurposeUsethiscommandtoconguretheh323gatewaydescriptor .Re-
storethedefaultwithnocommand.
CommandModesGlobalconguration
Syntaxh323-description<string>
noh323-description
Syntax
Description<string>h323gatewaydescriptor ,notmorethan64
characters.
DefaultsTheparameter<string>inthiscommandisZXR10Gatewayby
default.
InstructionsItisonlyappliedtoZXR10GARandZXR10ZSR.
h323-gatewayvoipgw-id
PurposeUsethiscommandtocongurethegatewayalias.Deletethealias
withthenocommand.
CommandModesInterfaceconguration
Syntaxh323-gatewayvoipgw-id<gw-name>
CondentialandProprietaryInformationofZTECORPORATION13

ZXR10CommandManual(VoiceandVideoServiceVolume)
noh323-gatewayvoipgw-id
Syntax
Description<gw-name>Gatewayalias,1~32characters
Instructions�Thegatewayaliasisconguredsothatthegatewaycanregis-
terandbeidentiedontheGKServer ,onlyonealiasisavail-
ableforagatewayandthelatestconguredcharacterstring
isvalid.
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
h323-gatewayvoipid
PurposeUsethiscommandtoconguretheGKServernameandIPaddress
correspondingtothegateway.Deletethemwiththenocommand.
CommandModesInterfaceconguration
Syntaxh323-gatewayvoipid<gk-name>ipaddr<gk-address>[<ras
-port>]
noh323-gatewayvoipid
Syntax
Description<gk-name>GKServername,casesensitive,1~32
characters
ipaddr<gk-address>GKServerIPaddress
<ras-port>GKServerRASport,intherangeof1~65535,
1719bydefault
Instructions�ThiscommandisusedtoconguretheGKServerIPaddress,
nameandRASportinformation.TheGKClientcanndthe
correctGKServerthroughtheinformationandregisteronthe
GKServer .
�ItisonlyappliedtoZXR10GARandZXR10ZSR.
h323-gatewayvoipinterface
PurposeUsethiscommandtosetaninterfacetoH.323gatewayinterface.
Deletetheinterfacewiththenocommand.
CommandModesInterfaceconguration
Syntaxh323-gatewayvoipinterface
noh323-gatewayvoipinterface
Instructions�Inarouter ,theEthernetinterfaceandserialportcanbesetto
H.323gatewayinterface.Intheconguration,usetheh323
-gatewayvoipinterfacecommandtospecifythisinterface
14CondentialandProprietaryInformationofZTECORPORATION