Zte MF65 User manual

1
ZTE MF65
Quick Guide

2
NOTE:
Do not use the device in an enclosed environment or where
heat dissipation is poor. Prolonged work in such space may
cause excessive heat and raise ambient temperature, which
may lead to automatic shutdown of the device for your safety.
In the case of such event, cool the device in a well-ventilated
place before turning on for normal use.

3
Contents
Getting to Know Your Device......................................4
Appearance...........................................................................4
Indicators...............................................................................5
Connection Scenario ............................................................6
Installing Your Device...................................................7
Connecting to Your Device..........................................9
Accessing the Internet .............................................. 13
Conguring Your PC.................................................. 16
Warning and Notice ................................................... 20
To the Owner.......................................................................20
Using Your Device ..............................................................21
Using Battery ......................................................................22
Limited Warranty.................................................................23
Troubleshooting......................................................... 25

4
Getting to Know Your Device
Appearance
The following gure is only for your reference. The actual
product may be different.
1. LED Indicators
2. Power Button
3. WPS Button
4. Micro USB Port
5. (U)SIM Card Slot
6. microSD Card Slot

5
Indicators
Indicator Status Description
Network
Red solid
Error status. Not registered to the
mobile network, no (U)SIM card
inserted or no network service
available.
Green solid Registered to the mobile network.
Green blinking Connected to the mobile network
and data is being transferred.
Wi-Fi
Blue solid Wi-Fi is active.
Blue blinking WPS is active.
LED light off Wi-Fi is off or your device is in
sleep mode.
Battery
Red solid/
blinking
The battery is low. Please charge
the battery.
Green blinking The battery is being charged.
Green solid The battery level is middle or high.
LED light off
Your device is in standby mode
and not being charged, or the
battery is not inserted.

6
Connection Scenario
Your device supports two methods to connect to the
Internet and supports multi-clients for surfing on the
Internet at the same time. The following gure is only for
your reference.
• 3G Mode: Use your (U)SIM card to access the Internet.
• AP Station Mode: Your device will connect to other
WLAN device (hotspot device, wireless router, etc.) via
Wi-Fi to access the Internet. The WLAN device has
already connected to the Internet.

7
Installing Your Device
1. Slide the back cover and remove it
2. Insert the (U)SIM card.
3. Insert the microSD card if necessary.

8
4. Insert the battery.
5. Close the back cover.

9
Connecting to Your Device
Via Wi-Fi
1. Power on your device directly. It will take 1~2 minutes to
initialize.
2. Use your normal Wi-Fi application on the client to
search for the available wireless networks.
NOTE: Please set the client to obtain an IP address
automatically referring to the chapter “Configuring your
PC”, and then the client will get an IP address like
“192.168.0.101”.

10
3. Select the SSID of your device, and then click Connect.
NOTE: Please check the label on your device to get the
default SSID.
4. Input the password, and then click Connect.
NOTE:You may need to input the password for Wi-Fi
connection. Please check the label on your device to get
the default.

11
5. Wait a moment, and then the client will connect to your
device successfully.
Via USB Cable
1. Connect to the device.
2. Power on your device.

12
3. The OS detects and recognizes new hardware and
nishes the installation automatically.
NOTE: If the system does not launch installation
automatically, you can run the installation program in path
of My Computer > ZTEMODEM.
4. Wait a moment, and then the client will connect to your
device successfully.

13
Accessing the Internet
3G Mode
After the client connected to your device successfully, you
can access the Internet in the Automatic or Manual mode.
The default mode is Automatic.
Mode Operations
Automatic
Your device will connect to the Internet
automatically, and your clients can surf on the
Internet directly.
Manual
Log in the webGUI conguration page, and
select Settings > 3G Settings > Network
Select > WAN Connection Mode > Manual,
and then click Connect or Disconnect.
NOTE:
If you want to modify the detailed parameters of your
device, please log in the webGUI configuration page by
visiting http://192.168.0.1 or http://m.home. The default
password is admin.

14
AP Station Mode
1. Log in the webGUI conguration page.
2. Select Settings > AP Station.
3. Set the WLAN and WLAN mode, and then click Apply.
NOTE:
You need to set the WLAN On and select Wi-Fi Prior.

15
4. Connect to the WLAN device.
There are two methods for your reference.
uInput the WLAN device information in the WLAN
Setting area, and then click Apply.
uClick More, select this WLAN device which will be
listed, and then click Connect.
5. After the client connected to the WLAN device
successfully, you can access the Internet.

16
Conguring Your PC
Follow the following steps and gures for Windows XP to
congure the Internet Protocol for your Wi-Fi connection.
1. Right-click My Network Places, and then select
Properties.

17
2. Right-click Wireless Network Connection, and then
select Properties.

18
3. Select Internet Protocol(TCP/IP), and then click
Properties.

19
4. Select Obtain an IP address automatically and
Obtain DNS server address automatically, and then
click OK to nish the conguration.