Zte ZXR10 8900 Series Installation manual

ZXR108900Series
10GigabitRoutingSwitch
CommandReference(Multicast)
Version2.8.02.C
ZTECORPORATION
ZTEPlaza,KejiRoadSouth,
Hi-TechIndustrialPark,
NanshanDistrict,Shenzhen,
P .R.China
518057
Tel:[phone]
Fax:[phone]
URL:http://ensupport.zte.com.cn
E-mail:[email protected]

LEGALINFORMATION
Copyright©2006ZTECORPORATION.
Thecontentsofthisdocumentareprotectedbycopyrightlawsandinternationaltreaties.Anyreproductionordistributionof
thisdocumentoranyportionofthisdocument,inanyformbyanymeans,withoutthepriorwrittenconsentofZTECORPO-
RATIONisprohibited.Additionally,thecontentsofthisdocumentareprotectedbycontractualcondentialityobligations.
Allcompany,brandandproductnamesaretradeorservicemarks,orregisteredtradeorservicemarks,ofZTECORPORATION
oroftheirrespectiveowners.
Thisdocumentisprovided“asis” ,andallexpress,implied,orstatutorywarranties,representationsorconditionsaredis-
claimed,includingwithoutlimitationanyimpliedwarrantyofmerchantability,tnessforaparticularpurpose,titleornon-in-
fringement.ZTECORPORATIONanditslicensorsshallnotbeliablefordamagesresultingfromtheuseoforrelianceonthe
informationcontainedherein.
ZTECORPORATIONoritslicensorsmayhavecurrentorpendingintellectualpropertyrightsorapplicationscoveringthesubject
matterofthisdocument.ExceptasexpresslyprovidedinanywrittenlicensebetweenZTECORPORATIONanditslicensee,
theuserofthisdocumentshallnotacquireanylicensetothesubjectmatterherein.
ZTECORPORATIONreservestherighttoupgradeormaketechnicalchangetothisproductwithoutfurthernotice.
UsersmayvisitZTEtechnicalsupportwebsitehttp://ensupport.zte.com.cntoinquirerelatedinformation.
TheultimaterighttointerpretthisproductresidesinZTECORPORATION.
RevisionHistory
RevisionNo.RevisionDateRevisionReason
R1.120091215Editionupdate
SerialNumber:sjzl20093860

AboutThisManual..............................................i
CommandIntroduction.....................................1
ManualInstruction..........................................................1
DescriptionofMan-MachineCommands.............................1
AuxiliaryFunction...........................................................2
CommandModes............................................................3
IGMPProtocol...................................................9
clearipigmpgroups.......................................................9
clearipigmppacket-count..............................................10
ipigmpaccess-group.....................................................10
ipigmpimmediate-leave................................................10
ipigmplast-member-query-interval.................................11
ipigmpquerier-timeout..................................................11
ipigmpquery-interval....................................................12
ipigmpquery-max-response-time...................................12
ipigmpstatic-group.......................................................13
ipigmpversion.............................................................13
ipigmpssm-mapstatic..................................................14
showipigmpgroups......................................................14
showipigmpgroupssummary........................................15
showipigmpinterface...................................................16
showipigmppacket-count.............................................16
showipigmpssm-mapping............................................17
PIM-SMProtocol..............................................19
accept-register..............................................................19
accept-rp.....................................................................20
bsr-candidate................................................................20
clearipmroute..............................................................21
ipmulticast-loadshare....................................................22
ipmulticast-routing.......................................................22
ippimbsr-border..........................................................22
ippimdr-priority...........................................................23
ippimneighbor-lter.....................................................23
ippimquery-interval.....................................................24
ippimsm.....................................................................24
ipmroute.....................................................................24
packet-count.................................................................25

routerpimsm................................................................25
rp-candidate.................................................................26
ssmrange....................................................................27
showipforwardingmroute.............................................27
showipmforwarding......................................................28
showipmroute.............................................................29
showipmroutesummary...............................................30
showippimbsr.............................................................31
showippimrpmapping.................................................31
showippimrphash.......................................................32
showippimsminterface.................................................33
showippimsmmroute...................................................33
showippimsmneighbor.................................................35
showippimsmpacket-count...........................................35
showiproutemulticast..................................................36
showiprpf...................................................................36
spt-threshold................................................................37
static-rp.......................................................................37
static-rpoverride...........................................................38
PIM-DMProtocol.............................................39
ippimdm.....................................................................39
routerpimdm................................................................39
showippimdminterface................................................40
showippimdmmroute...................................................40
showippimdmneighbor................................................41
MSDPProtocol.................................................43
clearipmsdppeer.........................................................43
clearipmsdpsa-cache...................................................44
clearipmsdpstatistics...................................................44
ipmsdpdefault-peer......................................................44
ipmsdpdescription........................................................45
ipmsdpmesh-group......................................................46
ipmsdporiginator-id......................................................47
ipmsdppeer................................................................47
ipmsdpredistribute.......................................................48
ipmsdpsa-lterin........................................................48
ipmsdpsa-lterout......................................................49
ipmsdpsa-limit............................................................50
ipmsdpshutdown.........................................................50
ipmsdpttl-threshold......................................................51

showipmsdpcount.......................................................51
showipmsdppeer........................................................52
showipmsdpsa-cache..................................................53
showipmsdpsummary..................................................54
IGMPSNOOPING.............................................55
igmpsnooping..............................................................56
igmpsnoopingacl.........................................................56
igmpsnoopingdrop.......................................................56
igmpsnoopingfast-leave................................................57
igmpsnoopinghost-time-out..........................................57
igmpsnoopinglast-member-query-interval.......................58
igmpsnoopingmax-group-num.......................................58
igmpsnoopingmax-host-in-group...................................58
igmpsnoopingmode......................................................59
igmpsnoopingmrouter..................................................59
igmpsnoopingmrouter-time-out.....................................60
igmpsnoopingprejoin....................................................60
igmpsnoopingproxy-ip..................................................61
igmpsnoopingquerier....................................................61
igmpsnoopingstatic......................................................62
ipigmpsnoopingclear-ssm-mapping...............................62
ipigmpsnoopingssm-mapping.......................................63
ipigmpsnoopingssm-mapping-rule.................................63
ipigmpsnooping...........................................................63
ipigmpsnoopingmode..................................................64
ipigmpsnoopingpacket-manage....................................64
ipigmpsnoopingquerier................................................65
ipigmpsnoopingquery-interval......................................65
ipigmpsnoopingquery-response-interval.........................66
ipigmpsnoopingmrouter-backup-en...............................66
ipigmpsnoopingmrouter-slave-to-master........................66
multicast-limit...............................................................67
showipigmpsnooping...................................................67
showipigmpsnoopinggroup..........................................67
showipigmpsnoopinggroup-source-ltervlan.................68
showipigmpsnoopinghost-source-ltervlan...................68
showipigmpsnoopingiptvport-info................................69
showipigmpsnoopingmr-port-info.................................69
showipigmpsnoopingport-info......................................69
showipigmpsnoopingquery..........................................70

showipigmpsnoopingssm-mapping...............................70
showipigmpsnoopingstatistic.......................................70
showipigmpsnoopingvlan............................................71
PIMSNOOPING...............................................73
ippimsnooping.............................................................73
pimsnooping................................................................73
showippimsnoopingall-statistic....................................74
showippimsnoopingall-statisticclear.............................74
showippimsnoopingentry............................................74
showippimsnoopingneighbor-info.................................75
showippimsnoopingport-info........................................75
showippimsnoopingport-statisticclearinterface.............76
showippimsnoopingport-statisticinterface.....................76
MLDSNOOPING...............................................77
mldsnooping................................................................77
mldsnoopingdrop.........................................................77
mldsnoopingfast-leave.................................................78
mldsnoopinghost-time-out............................................78
mldsnoopinglast-member-query-interval.........................79
mldsnoopingmax-group-num........................................79
mldsnoopingmax-host-in-group.....................................80
mldsnoopingmrouter....................................................80
mldsnoopingmrouter-time-out.......................................81
mldsnoopingquerier.....................................................81
mldsnoopingstatic........................................................81

AboutThisManual
AboutthisManualZXR108900Series(V2.8.02.C)10GRoutingSwitchCommand
Reference(Multicast).ZXR108900Series(V2.8.02.C)10GRout-
ingSwitchCommandReferencehas16volumes.Thedetailsare
asfollows:
ManualNameSummary
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(Index)
Thismanualdescribesvolume
andsectioncorrespondingto
eachcommandinZXR108900
series10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(IPv6)
Thismanualdescribes
IPv6-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(IPRoutingVolumeI)
ThismanualdescribesRIP ,OSPF
andIS-IS-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(IPRoutingVolumeII)
ThismanualdescribesBGP ,route
mapandroutingpolicy-related
commandsinZXR108900series
10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(MPLS)
Thismanualdescribes
MPLS-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(QoS)
Thismanualdescribes
QoS-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(Security)
Thismanualdescribesnetwork
security-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(DPI)
ThismanualdescribesDPI-related
commandsinZXR108900series
10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(FW)
ThismanualdescribesFW-related
commandsinZXR108900series
10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(BasicConguration
VolumeI)
Thismanualdescribessystem
management,lemanagement,
userinterface,logstatistics,
FTP/TFTPserverandIPvr-related
commandsinZXR108900series
10Groutingswitch.
CondentialandProprietaryInformationofZTECORPORATIONi

ZXR108900SeriesCommandReference(Multicast)
ManualNameSummary
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(BasicConguration
VolumeII)
Thismanualdescribesinterface
conguration,DHCPand
VRRP-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(BasicConguration
VolumeIII)
ThismanualdescribesNAT ,Time
Range,stackandDEBUG-related
commandsinZXR108900series
10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(NetworkManagement)
Thismanualdescribesnetwork
management-relatedcommands
inZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(EthernetSwitch)
ThismanualdescribesMAC,
VLAN,SuperVLAN,STP ,link
aggregation,VBAS,MACPING
andUDLD-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(VoiceandVideo)
ThismanualdescribesVOIPand
IPTV-relatedcommandsinZXR10
8900series10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Reference(Multicast)
Thismanualdescribesmulticast
protocol-relatedcommandsin
ZXR108900series10Grouting
switch.
ThecontentofthismanualisbasedonuniformZXROSplatform.
UnlessotherwisespeciedorwhenitisspeciedtoZXR10,the
manualappliestoalldevices.Theitemsaboutrouterintheman-
ualalsoapplytoswitchwithroutingfunction.
OverviewThismanualdescribesMulticast-relatedcommandsinZXR108900
series(V2.8.02.C)10Groutingswitchandcontainsthefollowing
chapters:
ChapterOverview
Chapter1DPI
Overview
Thischapterdescribesusingmethodofthis
commandmanual,commanddescription,
commandformats,auxiliaryfunctionsand
commandmodes.
Chapter2IGMP
Protocol
ThischapterdescribesIGMP-relatedcommands
inmulticastprotocol.
Chapter3PIM-SM
Protocol
ThischapterdescribesPIM-SM-relatedcommands
inmulticastprotocol.
Chapter4PIM-DM
Protocol
ThischapterdescribesPIM-DM-relatedcommands
inmulticastprotocol.
Chapter5MSDP
Protocol
ThischapterdescribesMSDP-relatedcommands
inmulticastprotocol.
iiCondentialandProprietaryInformationofZTECORPORATION

AboutThisManual
ChapterOverview
Chapter6IGMP
SNOOPING
ThischapterdescribesthecongurationofIGMP
SNOOPINGandcommandtoviewit.
Chapter7PIM
SNOOPING
ThischapterdescribesthecongurationofPIM
SNOOPINGandcommandtoviewit.
Chapter8MLD
SNOOPING
ThischapterdescribesthecongurationofMLD
SNOOPINGandcommandtoviewit.
CondentialandProprietaryInformationofZTECORPORATIONiii

ZXR108900SeriesCommandReference(Multicast)
Thispageisintentionallyblank.
ivCondentialandProprietaryInformationofZTECORPORATION

Chapter1
CommandIntroduction
TableofContents
ManualInstruction..............................................................1
DescriptionofMan-MachineCommands.................................1
AuxiliaryFunction...............................................................2
CommandModes................................................................3
ManualInstruction
ZXR108900Series(V2.8.02.C)10GRoutingSwitchCommand
Referenceincludes16volumes.Fordetailsofeachvolume,please
refertoprefaceofthismanual.
CommandsinZXR108900Series(V2.8.02.C)10GRoutingSwitch
CommandReference(Index)arelistedinsequenceoffromlettera
toletterzandinformoftable.Commandsofallothervolumesare
classiedandillustratedaccordingtodifferentfunctionmodules.
Eachfunctionmodulecorrespondstoonechapterandcommands
ineachchapterarelistedinformofsecond-leveldirectoryandin
thesequenceoffromletteratoletterz.
Tosearchacommandinformation,performthefollowingsteps:
1.SearchcorrespondingcommandinZXR108900Series
(V2.8.02.C)10GRoutingSwitchCommandReference(Index);
2.Findthedetailsofthiscommandincorrespondingvolumeac-
cordingtoobtainedvolumeinformationandchapterinforma-
tionrelatedtothiscommand.
DescriptionofMan-Machine
Commands
EachMMLcommandisdescribedbythefollowingitems:
�CommandFunction
Itdescribesthefunctionimplementedbythiscommand.
�CommandModes
Itdescribesthemodeinwhichthiscommandcanbeexecuted.
CondentialandProprietaryInformationofZTECORPORATION1

ZXR108900SeriesCommandReference(Multicast)
�Commandformat
Itdescribesthecompleteformatofthiscommand.Ifnofor-
matisavailable,listit.
�ParameterDescription
Itdescribesparametersinthiscommandintheformandpre-
scribestherangeanddefaultvalue.Ifdifferentproductshave
differentparameterrangesordefaultvalues,anadditional
formisusedfordescription.
�DefaultConguration
Thedefaultvalueisavailableinthecasethatthiscommandis
notset.Thedefaultparametervalueisnotdescribedherefor
valueselection.Additionaldescriptionshallbegivenifdifferent
productshavedifferentdefaultvalues.
�Tips
Itrstlydescribestheplatformversioninformationaboutthis
command.Forexample,“TheplatformversionX.X.XXorlater
supportsthiscommand”indicatesthiscommandisprovided
fromplatformversionX.X.XX.Thiscommandisprovidedfrom
platformversion4.6.01bydefault.
Aftertheseinformation,itdescribestheusemethodandpre-
cautionsofthiscommand.
�Example
Ittakesanexampletointroducehowtousethiscommand.
�RelatedCommands
Itlistscommandsrelatedtothiscommand.
�HistoryCommand
Itdescribeshistoryversioninformationrelatedtothiscom-
mandifacommandischangedafterversionupgrade.
Note:
Donotdescribethecommandhistoryifthisentrydoesnotexist.
AuxiliaryFunction
CommandhelpfunctionofZXR10deviceshasthefollowingfea-
tures:
1.Byenteringaquestionmark(?)followingDOSpromptinany
commandmode,alistofavailablecommandsinthiscommand
modearedisplayed.Withthecontext-sensitivehelpfunction,
thekeywordsandparameterlistofanycommandscanbedis-
played.
�Byenteringaquestionmark"?"followingDOSpromptin
anycommandmode,alistofallcommandsinthismode
andbriefdescriptionofthesecommandsaredisplayed.
2CondentialandProprietaryInformationofZTECORPORATION

Chapter1CommandIntroduction
�Inputthequestionmarkfollowingacharacteroracharac-
terstring,alistofcommandsorkeywordsbeginningwith
thischaracterorcharacterstringisdisplayed.Notethat
thereisnospacebetweenthecharacter(string)andthe
questionmark.
�PressTabkeyfollowingthecharacterstring.Ifthecom-
mandorkeywordbeginningwiththischaracterstringis
unique,complementthecommandorkeywordandattach
aspacetotheend.Notethatthereisnospacebetween
thecharacterstringandtheTabkey.
�Inputaquestionmark(?)followingthecommand,key-
wordorparameter .Thenextkeywordorparametertobe
enteredislisted,andalsoabriefdescriptionisgiven.A
spaceshallbeenteredbeforethequestionmark.
2.Ifincorrectcommand,keywordorparameterisentered,the
errorisolationisofferedwith^intheuserinterfaceafteryou
pressEnterkey.Character^locatesbelowtherstcharacter
oftheenteredincorrectcommand,keywordorparameter .
3.Thesystemallowsthecommandorkeywordtobeabbreviated
toacharacterorcharacterstringthatuniquelyidentiesthis
commandorkeyword.Forexample,showcommandcanbe
abbreviatedtoshorsho.
4.Userinterfacesupportsthefunctionofrecordinginputcom-
mands.Maximumtenhistorycommandscanberecorded.This
functionisveryusefulinre-invocationofalongorcomplicated
commandoringress.
Tore-invokeacommandfromtherecordbuffer ,conductone
ofthefollowingoperations.
CommandFunction
PressCtrl-Porthe
uparrowkey
Itre-invokesthelatestcommandsinthe
recordbuffer .Repressthesekeystoinvoke
oldcommandsforwards.
PressCtrl-Nordown
arrowkey
Rollcommandsdownwards.Whenthe
lastcommandlineisreached,onemore
operationwillrollthecommandsfromthe
beginningofthebuffercyclically.
Useshowhistorycommandinanymode,andthelatestsev-
eralcommandsinthismodewillbelisted.
CommandModes
Thecommandmodesinthismanualareasfollows:
CondentialandProprietaryInformationofZTECORPORATION3

ZXR108900SeriesCommandReference(Multicast)
ModesPromptAdmis-
sion
Mode
Command
toEnterthe
Mode
Function
User
Mode
ZXR10>Enterthis
modedirectly
afterlogging
ontosystem
Viewsimple
information
Privi-
leged
mode
ZXR10#User
Mode
enableCongure
system
parameters
Global
cong-
uration
mode
ZXR10(config)#Privi-
leged
mode
configure
terminal
Congure
globalservice
parameters
Inter-
face
cong-
uration
mode
ZXR10(config-
if)#Global
cong-
uration
mode
interfaceItcongures
port
parameters
andselects
aporttype
dependingon
thekeyword.
Subin-
terface
mode
ZXR10(config-
subif)#Global
cong-
uration
mode
interfaceItcongures
subinterface
parametersof
NPCI/NPCT .
VLAN
Data-
base
Cong-
uration
Mode
ZXR10(vlan-
db)#Privi-
leged
mode
vlandatab
ase
Createor
deleteVLAN
inbatch
VLAN
Cong-
uration
Mode
ZXR10(config-
vlan)#Global
cong-
uration
mode
vlanCongure
VLAN
parameters.
MSTP
Cong-
uration
Mode
ZXR10(config-
mstp)#Global
cong-
uration
mode
spanning-t
reemstconf
iguration
Congure
MSTP
parameters.
Basic
ACL
Cong-
uration
Mode
ZXR10(config-
basic-acl)#Global
cong-
uration
mode
aclbasicDenebasic
ACLrules
Ex-
tended
ACL
Cong-
uration
Mode
ZXR10(config-
ext-acl)#Global
cong-
uration
mode
aclextendDene
extendedACL
rules
4CondentialandProprietaryInformationofZTECORPORATION

Chapter1CommandIntroduction
ModesPromptAdmis-
sion
Mode
Command
toEnterthe
Mode
Function
LINE
cong-
uration
mode
ZXR10(config-
line)#Global
cong-
uration
mode
lineconsole
0
line<1~64>
(GARDevices)
Itcong-
uresserial
portcon-
nection/tel-
netconnec-
tion-related
parameters.
L2ACL
Cong-
uration
Mode
ZXR10(config-
link-acl)#Global
cong-
uration
mode
acllinkDenel2ACL
rules
Hybrid
ACL
Cong-
uration
Mode
ZXR10(config-
hybd-acl)#Global
cong-
uration
mode
aclhybridDenehybrid
ACLrules
Router
stand-
ardACL
mode
ZXR10(config-
std-nacl)#Global
cong-
uration
mode
ipaccess-listItdenes
router
standardACL
rules.
Router
ex-
tended
ACL
mode
ZXR10(config-
ext-nacl)#Global
cong-
uration
mode
ipaccess-listItdenes
router
extendedACL
rules.
routerripCongure
RIPprotocol
parameters
routerospfCongure
OSPFprotocol
parameters
routerisisCongure
IS-ISprotocol
parameters
routerbgpCongure
BGPprotocol
parameters
router
pimsm
Congure
PIM-SM
protocol
parameters
ipv6router
rip
Itcongures
RIPng
parameters.
Route
cong-
uration
mode
ZXR10(config-
router)#Global
cong-
uration
mode
ipv6router
ospf
Itcongures
OSPFv3
parameters.
CondentialandProprietaryInformationofZTECORPORATION5

ZXR108900SeriesCommandReference(Multicast)
ModesPromptAdmis-
sion
Mode
Command
toEnterthe
Mode
Function
VRF
Cong-
uration
Mode
ZXR10(config-
vrf)#Global
cong-
uration
mode
ipvrfCongure
VRFprotocol
parameters
VFIcon-
gu-
ration
mode
ZXR10(config-
vfi)#Global
cong-
uration
mode
vfiItcongures
VPLS-related
parameters.
Route
cong-
uration
mode
(RIP)
address-fam
ilyipv4vrf
CongureRIP
VRFprotocol
parameters
Route
address
mode
ZXR10(config-
router-af)#
Route
cong-
uration
mode
(BGP)
address-fam
ilyvpnv4
address-fam
ilyipv4vrf
Congure
BGP ,VPNand
VRFprotocol
parameters
Route
cong-
uration
mode
(BGP4)
address-fam
ilyipv6
Itcongures
BGP4+
unicast
address
family.
IPv6
unicast
address
family
cong-
uration
mode
ZXR10(config-
router-af)#
Route
cong-
uration
mode
(IS-
ISv6)
address-fam
ilyipv6
Itcongures
IS-ISv6
address
family.
Route
Map
Cong-
uration
Mode
ZXR10(config-
route-map)#Global
cong-
uration
mode
route-mapCongure
routemap
matching
itemand
operations
Chan-
nelized
cong-
uration
mode
ZXR10(config-
control)#Global
cong-
uration
mode
controlItcongures
channelization
force1,ce3
andcpos3.
Dial
peer
cong-
uration
mode
ZXR10(config-
voip100)#Global
cong-
uration
mode
dial-peer
voice
Itcongures
services
relatedto
integrated
service.
Voice
port
cong-
uration
mode
ZXR10(config-
voice-port)#Global
cong-
uration
mode
voice-portItcongures
voiceservice.
6CondentialandProprietaryInformationofZTECORPORATION

Chapter1CommandIntroduction
ModesPromptAdmis-
sion
Mode
Command
toEnterthe
Mode
Function
IPSec
cong-
uration
mode
ZXR10(config-
ipsec)#Global
cong-
uration
mode
ipsecItcongures
IPv6IPSec
protection.
Diagno-
sismode
ZXR10(diag)#Privi-
leged
mode
diagnoseIttestsCPU
utilization
andmemory
utilization.
CondentialandProprietaryInformationofZTECORPORATION7

ZXR108900SeriesCommandReference(Multicast)
Thispageisintentionallyblank.
8CondentialandProprietaryInformationofZTECORPORATION

Chapter2
IGMPProtocol
TableofContents
clearipigmpgroups...........................................................9
clearipigmppacket-count..................................................10
ipigmpaccess-group.........................................................10
ipigmpimmediate-leave....................................................10
ipigmplast-member-query-interval.....................................11
ipigmpquerier-timeout......................................................11
ipigmpquery-interval........................................................12
ipigmpquery-max-response-time.......................................12
ipigmpstatic-group...........................................................13
ipigmpversion.................................................................13
ipigmpssm-mapstatic......................................................14
showipigmpgroups..........................................................14
showipigmpgroupssummary............................................15
showipigmpinterface.......................................................16
showipigmppacket-count.................................................16
showipigmpssm-mapping................................................17
clearipigmpgroups
PurposeUsethiscommandtodeletedynamicallyaddedmulticastgroups
.
CommandModesPrivilegedEXEC
Syntaxclearipigmpgroups[<interface-name>]
Syntax
Description<interface-name>Interfacename
InstructionsIfthereisnoparameterafterthiscommand,alldynamicallyadded
multicastgroupsaredeleted.
Ifthereisthe<interface-name>parameterafterthiscommand,
alldynamicallyaddedmulticastgroupsonthespeciedinterface
aredeleted.
CondentialandProprietaryInformationofZTECORPORATION9

ZXR108900SeriesCommandReference(Multicast)
Related
Commands
showipigmpgroups
clearipigmppacket-count
PurposeUsethiscommandtoclearthestatisticscountofIGMPre-
ceived/sentmessages.
CommandModesPrivilegedEXEC
Syntaxclearipigmppacket-count
Related
Commands
showipigmppacket-count
ipigmpaccess-group
PurposeUsethiscommandtosetlimitsonaninterfaceformulticastgroup
joinrequestsbyhosts.Removelimitssetonaninterfacewiththe
noformofthiscommand.
CommandModesInterfaceconguration
Syntaxipigmpaccess-group<access-list-number>
noipigmpaccess-group
Syntax
Description<access-list-number>StandardIPaccesslistnumber ,range:1~99
DefaultsThereisnolimitformulticastgroupjoinrequestsbyhostsbyde-
fault.
Related
Commands
access-list
showipigmpinterface
ipigmpimmediate-leave
PurposeUsethiscommandtominimizetheleavelatencyofInternetGroup
ManagementProtocol(IGMP)membershipswhenIGMPVersion2
isused.Disablethisfeaturewiththenoformofthiscommand.
CommandModesInterfaceconguration
Syntaxipigmpimmediate-leave[group-list<access-list-number>]
noipigmpimmediate-leave
Syntax
Descriptiongroup-list
<access-list-number>
Standardaccesslistnumber ,range:1~99
10CondentialandProprietaryInformationofZTECORPORATION