Zte ZXR10 8900 Series Installation instructions

ZXR108900
Series10GRoutingSwitch
CommandManual(DPIVolume)
Version2.8.02.C
ZTECORPORATION
ZTEPlaza,KejiRoadSouth,
Hi-TechIndustrialPark,
NanshanDistrict,Shenzhen,
P .R.China
518057
Tel:[phone]
Fax:[phone]
URL:http://ensupport.zte.com.cn
E-mail:[email protected]

LEGALINFORMATION
Copyright©2006ZTECORPORATION.
Thecontentsofthisdocumentareprotectedbycopyrightlawsandinternationaltreaties.Anyreproductionordistributionof
thisdocumentoranyportionofthisdocument,inanyformbyanymeans,withoutthepriorwrittenconsentofZTECORPO-
RATIONisprohibited.Additionally,thecontentsofthisdocumentareprotectedbycontractualcondentialityobligations.
Allcompany,brandandproductnamesaretradeorservicemarks,orregisteredtradeorservicemarks,ofZTECORPORATION
oroftheirrespectiveowners.
Thisdocumentisprovided“asis” ,andallexpress,implied,orstatutorywarranties,representationsorconditionsaredis-
claimed,includingwithoutlimitationanyimpliedwarrantyofmerchantability,tnessforaparticularpurpose,titleornon-in-
fringement.ZTECORPORATIONanditslicensorsshallnotbeliablefordamagesresultingfromtheuseoforrelianceonthe
informationcontainedherein.
ZTECORPORATIONoritslicensorsmayhavecurrentorpendingintellectualpropertyrightsorapplicationscoveringthesubject
matterofthisdocument.ExceptasexpresslyprovidedinanywrittenlicensebetweenZTECORPORATIONanditslicensee,
theuserofthisdocumentshallnotacquireanylicensetothesubjectmatterherein.
ZTECORPORATIONreservestherighttoupgradeormaketechnicalchangetothisproductwithoutfurthernotice.
UsersmayvisitZTEtechnicalsupportwebsitehttp://ensupport.zte.com.cntoinquirerelatedinformation.
TheultimaterighttointerpretthisproductresidesinZTECORPORATION.
RevisionHistory
RevisionNo.RevisionDateRevisionReason
R1.020090610FirstRelease
SerialNumber:sjz120093866

Contents
Preface...............................................................i
Overview...........................................................1
ManualInstruction..........................................................1
DescriptionofMan-MachineCommands.............................1
AuxiliaryFunction...........................................................2
CommandModes............................................................3
ConguringSignatureEntry..............................9
Commandsignature-entry............................................9
Commandsetcontent..................................................9
Commandshowsignature-entry.................................10
ConguringSignatureSymbol.........................11
Commandsignature-symbol........................................11
Commandaddsignature-entry....................................12
Commandsethit-limit-num.......................................12
Commandshowsignature-symbol..............................13
ConguringPolicy...........................................15
Commandflow-pool....................................................15
Commandupstream-rate-limit....................................15
Commanddownstream-rate-limit...............................16
Commanddefault-flow-pool........................................17
Commandshowflow-pool...........................................17
ConguringSubService..................................19
Commandsubservice..................................................19
Commandaddsignature-symbol.................................19
Commandaddprotocol...............................................20
Commandbindflow-pool............................................21
Commandaction.........................................................21
Commandaging-time..................................................21
Commandshowsubservice.........................................22
ConguringService.........................................23
Commandservice........................................................23

Commandaddsubservice...........................................23
Commandimportsubservice.......................................24
Commandbindflow-pool............................................24
Commandshowservice...............................................25
ConguringDPITemplate...............................27
Commanddpi-template...............................................27
Commandbindslot.....................................................27
Commandbindservice................................................28
Commandbindsip-addr..............................................28
Commandbindswitchport..........................................29
Commandshowdpi-template......................................30
NewCommandsinDPICongMode................31
Commandbindmng-server-ip.....................................31
Commandclearconnection-all....................................32
Commandcommit.......................................................32
Commandlog-filelist-dir............................................32
Commandlog-filedelete-dir........................................33
Commandlog-filedelete-file.......................................33
Commandsetactive-save-interval.............................34
Commandshowconnection-by-ip...............................34
Commandshowdpi-vlan-binding.................................35
Commandshowdpi-mng-ip.........................................35
Commandupdatesignature-file..................................36
Commanduploadauto................................................36
Commanduploadinterval...........................................36
Commandupdatedpi-log............................................37
Commanduploadtoday-log........................................38

Preface
AboutManualsThismanualisZXR108900Series(V2.8.02.C)10GRoutingSwitch
CommandManual(DPIVolume).ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommandManualhas16volumes.Thedetails
areasfollows:
ManualSummary
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(CommandIndexVolume)
Thismanualdescribesvolume
andsectioncorrespondingto
eachcommandinZXR108900
series10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(IPv6Volume)
Thismanualdescribes
IPv6-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(IPv4RoutingVolumeI)
ThismanualdescribesRIP ,OSPF
andIS-IS-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(IPv4RoutingVolumeII)
ThismanualdescribesBGP ,route
mapandroutingpolicy-related
commandsinZXR108900series
10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(MPLSVolume)
Thismanualdescribes
MPLS-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(QoSVolume)
Thismanualdescribes
QoS-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(DPIVolume)
ThismanualdescribesDPI-related
commandsinZXR108900series
10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(SecurityVolume)
Thismanualdescribesnetwork
security-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(FWVolume)
ThismanualdescribesFW-related
commandsinZXR108900series
10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(BasicConguration
VolumeI)
Thismanualdescribessystem
management,lemanagement,
userinterface,logstatistics,
FTP/TFTPserverandIPvr-related
commandsinZXR108900series
10Groutingswitch.
CondentialandProprietaryInformationofZTECORPORATIONi

ZXR108900CommandManual(DPIVolume)
ManualSummary
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(BasicConguration
VolumeII)
Thismanualdescribesinterface
conguration,DHCPand
VRRP-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(BasicConguration
VolumeIII)
ThismanualdescribesNAT ,Time
Range,stackandDEBUG-related
commandsinZXR108900series
10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(NetworkManagement
Volume)
Thismanualdescribesnetwork
management-relatedcommands
inZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(EthernetSwitching
Volume)
ThismanualdescribesMAC,
VLAN,SuperVLAN,STP ,link
aggregation,VBAS,MACPING
andUDLD-relatedcommandsin
ZXR108900series10Grouting
switch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(VoiceandVideoVolume)
ThismanualdescribesVOIPand
IPTV-relatedcommandsinZXR10
8900series10Groutingswitch.
ZXR108900Series(V2.8.02.C)
10GRoutingSwitchCommand
Manual(MulticastVolume)
Thismanualdescribesmulticast
protocol-relatedcommandsin
ZXR108900series10Grouting
switch.
ThecontentofthismanualisbasedonuniformZXROSplatform.
UnlessotherwisespeciedorwhenitisspeciedtoZXR10,the
manualappliestoalldevices.Theitemsaboutrouterintheman-
ualalsoapplytoswitchwithroutingfunction.
WhatIsinThis
Manual
ThismanualdescribesDPI-relatedcommandsinZXR108900se-
ries(V2.8.02.C)10Groutingswitchandcontainsthefollowing
chapters:
ChapterSummary
Chapter1DPI
Overview
Thischapterdescribesusingmethodofthis
commandmanual,commanddescription,
commandformats,auxiliaryfunctionsand
commandmodes.
Chapter2
SignatureEntry
Conguration
Thischapterdescribescongurationof
signatureentryandcommandusedtoviewthis
conguration.
Chapter3
SignatureSymbol
Conguration
Thischapterdescribescongurationofsignature
symbolandcommandusedtoviewthis
conguration.
Chapter4Policy
Conguration
Thischapterdescribescongurationofpolicyand
commandusedtoviewthisconguration.
iiCondentialandProprietaryInformationofZTECORPORATION

Preface
ChapterSummary
Chapter5
SubService
Conguration
Thischapterdescribescongurationofsubservice
andcommandusedtoviewthisconguration.
Chapter6Service
Conguration
Thischapterdescribescongurationofservice
andcommandusedtoviewthisconguration.
Chapter7
DPITemplate
Conguration
ThischapterdescribescongurationofDPI
templateandcommandusedtoviewDPI
template.
Chapter8Newly
AddedCommands
inDPICongMode
Thischapterdescribesnewlyaddedcommandsin
DPIcongmode.
CondentialandProprietaryInformationofZTECORPORATIONiii

ZXR108900CommandManual(DPIVolume)
Thispageisintentionallyblank.
ivCondentialandProprietaryInformationofZTECORPORATION

Chapter1
Overview
TableofContents
ManualInstruction..............................................................1
DescriptionofMan-MachineCommands.................................1
AuxiliaryFunction...............................................................2
CommandModes................................................................3
ManualInstruction
ZXR108900Series(V2.8.02.C)10GRoutingSwitchCommand
Manualincludes16volumes.Fordetailsofeachvolume,please
refertoprefaceofthismanual.
CommandsinZXR108900Series(V2.8.02.C)10GRoutingSwitch
CommandManual(CommandIndexVolume)arelistedinse-
quenceoffromletteratoletterzandinformoftable.Commands
ofallothervolumesareclassiedandillustratedaccordingto
differentfunctionmodules.Eachfunctionmodulecorresponds
toonechapterandcommandsineachchapterarelistedinform
ofsecond-leveldirectoryandinthesequenceoffromletterato
letterz.
Tosearchacommandinformation,performthefollowingsteps:
1.SearchcorrespondingcommandinZXR108900Series
(V2.8.02.C)10GRoutingSwitchCommandManual(Command
IndexVolume);
2.Findthedetailsofthiscommandincorrespondingvolumeac-
cordingtoobtainedvolumeinformationandchapterinforma-
tionrelatedtothiscommand.
DescriptionofMan-Machine
Commands
EachMMLcommandisdescribedbythefollowingitems:
�CommandFunction
Itdescribesthefunctionimplementedbythiscommand.
�CommandMode
CondentialandProprietaryInformationofZTECORPORATION1

ZXR108900CommandManual(DPIVolume)
Itdescribesthemodeinwhichthiscommandcanbeexecuted.
�CommandFormat
Itdescribesthecompleteformatofthiscommand.Ifnofor-
matisavailable,listit.
�ParameterDescription
Itdescribesparametersinthiscommandintheformandpre-
scribestherangeanddefaultvalue.Ifdifferentproductshave
differentparameterrangesordefaultvalues,anadditional
formisusedfordescription.
�DefaultValue
Thedefaultvalueisavailableinthecasethatthiscommandis
notset.Thedefaultparametervalueisnotdescribedherefor
valueselection.Additionaldescriptionshallbegivenifdifferent
productshavedifferentdefaultvalues.
�Instructions
Itrstlydescribestheplatformversioninformationaboutthis
command.Forexample,“TheplatformversionX.X.XXorlater
supportsthiscommand”indicatesthiscommandisprovided
fromplatformversionX.X.XX.Thiscommandisprovidedfrom
platformversion4.6.01bydefault.
Aftertheseinformation,itdescribestheusemethodandpre-
cautionsofthiscommand.
�Example
Ittakesanexampletointroducehowtousethiscommand.
�RelatedCommands
Itlistscommandsrelatedtothiscommand.
�CommandHistory
Itdescribeshistoryversioninformationrelatedtothiscom-
mandifacommandischangedafterversionupgrade.
Note:
Donotdescribethecommandhistoryifthisentrydoesnotexist.
AuxiliaryFunction
CommandhelpfunctionofZXR10deviceshasthefollowingfea-
tures:
1.Byenteringaquestionmark(?)followingDOSpromptinany
commandmode,alistofavailablecommandsinthiscommand
modearedisplayed.Withthecontext-sensitivehelpfunction,
thekeywordsandparameterlistofanycommandscanbedis-
played.
2CondentialandProprietaryInformationofZTECORPORATION

Chapter1Overview
�Byenteringaquestionmark(?)followingDOSpromptin
anycommandmode,alistofallcommandsinthismode
andbriefdescriptionofthesecommandsaredisplayed.
�Inputthequestionmarkfollowingacharacteroracharac-
terstring,alistofcommandsorkeywordsbeginningwith
thischaracterorcharacterstringisdisplayed.Notethat
thereisnospacebetweenthecharacter(string)andthe
questionmark.
�PressTabkeyfollowingthecharacterstring.Ifthecom-
mandorkeywordbeginningwiththischaracterstringis
unique,complementthecommandorkeywordandattach
aspacetotheend.Notethatthereisnospacebetween
thecharacterstringandtheTabkey.
�Inputaquestionmark(?)followingthecommand,key-
wordorparameter .Thenextkeywordorparametertobe
enteredislisted,andalsoabriefdescriptionisgiven.A
spaceshallbeenteredbeforethequestionmark.
2.Ifincorrectcommand,keywordorparameterisentered,the
errorisolationisofferedwith^intheuserinterfaceafteryou
pressEnterkey.Character^locatesbelowtherstcharacter
oftheenteredincorrectcommand,keywordorparameter .
3.Thesystemallowsthecommandorkeywordtobeabbreviated
toacharacterorcharacterstringthatuniquelyidentiesthis
commandorkeyword.Forexample,showcommandcanbe
abbreviatedtoshorsho.
4.Userinterfacesupportsthefunctionofrecordinginputcom-
mands.Maximumtenhistorycommandscanberecorded.This
functionisveryusefulinre-invocationofalongorcomplicated
commandoringress.
Tore-invokeacommandfromtherecordbuffer ,conductone
ofthefollowingoperations.
CommandFunction
PressCtrl-Porthe
uparrowkey
Itre-invokesthelatestcommandsinthe
recordbuffer .Repressthesekeystoinvoke
oldcommandsforwards.
PressCtrl-Nordown
arrowkey
Rollcommandsdownwards.Whenthe
lastcommandlineisreached,onemore
operationwillrollthecommandsfromthe
beginningofthebuffercyclically.
Useshowhistorycommandinanymode,andthelatestsev-
eralcommandsinthismodewillbelisted.
CommandModes
Thecommandmodesinthismanualareasfollows:
CondentialandProprietaryInformationofZTECORPORATION3

ZXR108900CommandManual(DPIVolume)
ModePromptAdmis-
sion
Mode
ModeEntry
Command
Function
Exec
mode
ZXR10>Enterthis
modedirectly
aftersystem
login.
Itviews
simple
information.
Privi-
leged
mode
ZXR10#Exec
mode
enableItcongures
system
parameters.
Global
cong-
uration
mode
ZXR10(config)#Privi-
leged
mode
configure
terminal
Itcongures
globalservice
parameters.
Inter-
face
cong-
uration
mode
ZXR10(config-
if)#Global
cong-
uration
mode
interfaceItcongures
port
parameters
andselects
aporttype
dependingon
thekeyword.
Subin-
terface
mode
ZXR10(config-
subif)#Global
cong-
uration
mode
interfaceItcongures
sub-interface
parametersof
NPCI/NPCT .
VLAN
data-
base
cong-
uration
mode
ZXR10(vlan-
db)#Privi-
leged
mode
vlandatab
ase
Itcreatesor
deletesVLANs
inbatch.
VLAN
cong-
uration
mode
ZXR10(config-
vlan)#Global
cong-
uration
mode
vlanItcongures
VLAN
parameters.
MSTP
cong-
uration
mode
ZXR10(config-
mstp)#Global
cong-
uration
mode
spanning-t
reemstconf
iguration
Itcongures
MSTP
parameters.
Basic
ACL
cong-
uration
mode
ZXR10(config-
basic-acl)#Global
cong-
uration
mode
aclbasicItdenes
basicACL
rules.
Ex-
tended
ACL
cong-
uration
mode
ZXR10(config-
ext-acl)#Global
cong-
uration
mode
aclextendItdenes
extendedACL
rules.
4CondentialandProprietaryInformationofZTECORPORATION

Chapter1Overview
ModePromptAdmis-
sion
Mode
ModeEntry
Command
Function
LINE
cong-
uration
mode
ZXR10(config-
line)#Global
cong-
uration
mode
lineconsole
0
line<1~64>
(GARDevices)
Itcong-
uresserial
portcon-
nection/tel-
netconnec-
tion-related
parameters.
L2ACL
cong-
uration
mode
ZXR10(config-
link-acl)#Global
cong-
uration
mode
acllinkItdenesL2
ACLrules.
Hybrid
ACL
cong-
uration
mode
ZXR10(config-
hybd-acl)#Global
cong-
uration
mode
aclhybridItdenes
hybridACL
rules.
Router
stand-
ardACL
mode
ZXR10(config-
std-nacl)#Global
cong-
uration
mode
ipaccess-listItdenes
router
standardACL
rules.
Router
ex-
tended
ACL
mode
ZXR10(config-
ext-nacl)#Global
cong-
uration
mode
ipaccess-listItdenes
router
extendedACL
rules.
routerripItcongures
RIP
parameters.
routerospfItcongures
OSPF
parameters.
routerisisItcongures
IS-IS
parameters.
routerbgpItcongures
BGP
parameters.
router
pimsm
Itcongures
PIM-SM
parameters.
ipv6router
rip
Itcongures
RIPng
parameters.
Route
cong-
uration
mode
ZXR10(config-
router)#Global
cong-
uration
mode
ipv6router
ospf
Itcongures
OSPFv3
parameters.
CondentialandProprietaryInformationofZTECORPORATION5

ZXR108900CommandManual(DPIVolume)
ModePromptAdmis-
sion
Mode
ModeEntry
Command
Function
VRF
cong-
uration
mode
ZXR10(config-
vrf)#Global
cong-
uration
mode
ipvrfItcongures
VRF
parameters.
VFIcon-
gu-
ration
mode
ZXR10(config-
vfi)#Global
cong-
uration
mode
vfiItcongures
VPLS-related
parameters.
Route
cong-
uration
mode
(RIP)
address-fam
ilyipv4vrf
Itcongures
RIPVRF
parameters.
Route
address
mode
ZXR10(config-
router-af)#
Route
cong-
uration
mode
(BGP)
address-fam
ilyvpnv4
address-fam
ilyipv4vrf
Itcongures
BGP ,VPN
andVRF
parameters.
Route
cong-
uration
mode
(BGP4)
address-fam
ilyipv6
Itcongures
BGP4+
unicast
address
family.
IPv6
unicast
address
family
cong-
uration
mode
ZXR10(config-
router-af)#
Route
cong-
uration
mode
(IS-
ISv6)
address-fam
ilyipv6
Itcongures
IS-ISv6
address
family.
Route
map
cong-
uration
mode
ZXR10(config-
route-map)#Global
cong-
uration
mode
route-mapItcongures
routemap
matching
itemand
operations.
Chan-
nelized
cong-
uration
mode
ZXR10(config-
control)#Global
cong-
uration
mode
controlItcongures
channelization
force1,ce3
andcpos3.
Dial
peer
cong-
uration
mode
ZXR10(config-
voip100)#Global
cong-
uration
mode
dial-peer
voice
Itcongures
services
relatedto
integrated
service.
Voice
port
cong-
uration
mode
ZXR10(config-
voice-port)#Global
cong-
uration
mode
voice-portItcongures
voiceservice.
6CondentialandProprietaryInformationofZTECORPORATION

Chapter1Overview
ModePromptAdmis-
sion
Mode
ModeEntry
Command
Function
IPSec
cong-
uration
mode
ZXR10(config-
ipsec)#Global
cong-
uration
mode
ipsecItcongures
IPv6IPSec
protection.
Diagno-
sismode
ZXR10(diag)#Privi-
leged
mode
diagnoseIttestsCPU
utilization
andmemory
utilization.
CondentialandProprietaryInformationofZTECORPORATION7

ZXR108900CommandManual(DPIVolume)
Thispageisintentionallyblank.
8CondentialandProprietaryInformationofZTECORPORATION

Chapter2
ConfiguringSignature
Entry
TableofContents
Commandsignature-entry................................................9
Commandsetcontent......................................................9
Commandshowsignature-entry.....................................10
Commandsignature-entry
Command
Function
Thisenterssignature-entrycongurationmode.Commandnocan
beusedtocleartheconguration.Commandsignature-entry
canbeusedtocongureneededkeywords.
CommandModeDPIcongurationmodewithprompttobeZXR10(config-dpi)#
CommandFormatsignature-entry<signature-entry-id>
Parameter
DescriptionParameterDescription
<signature-entry-id>Itistheidofsignatureentry,rangingfrom
1to16383.12288-16383isreservedand
cannotbeconguredbyuser .0indicatesthe
idisinvalid.
ExampleToentersignatureentrycongurationmode,executethefollowing
commands:
ZXR10(config-dpi)#signature-entry2
ZXR10(config-dpi-signature-entry-2)#
Commandsetcontent
Command
Function
ItaddsdigitaldecimalKEYintocurrentsignatureentry.
CommandModeSignatureentrycongurationmodewithprompttobeZXR10(config-
dpi-signature-entry-n)#.
CondentialandProprietaryInformationofZTECORPORATION9

ZXR108900CommandManual(DPIVolume)
CommandFormatsetcontent<0xABCDEF(0xff0000ffff00ff000000000000000000
)+0x1111+0x222+0x33+0xbbbb>
Parameter
DescriptionParameterDescription
<0xABCDEF(0xff0000
ffff00ff000000000000
000000)+0x1111+0x
222+0x33+0xbbbb>
0xABC-
DEF(0xff0000ffff00ff000000000000000000):
staticKEYisthehexadecimaldigits
withlengthtobe1-32charactersand
(0xff0000ffff00ff000000000000000000)
isthemaskwith32bits;
0x1111+0x222+0x33+1xbbbb:dynamicKEY
isthehexadecimaldigitswithlengthto
be1-48characters,suchas0x30456754,
0x6d6f7e5bandsoon.
ExampleToentersignatureentrycongurationmodeandaddonestatic
KEY"0xabcd"(maskis0xffff00ff000000000000000000000000)
andtwodynamickeys"0xffe032"and"0xAC"tosignatureentry
2,executethefollowingcommands:
ZXR10(config-dpi)#fix-signature-entry2
ZXR10(config-dpi-signature-entry-2)#setcontent
0xabcd(0xffff00ff000000000000000000000000)+0xffe032+0xAC
Commandshow
signature-entry
Command
Function
Itshowscongurationofsignature-entry.
CommandModeAllmodes
CommandFormatshowsignature-entry<signature-entry-id>
Parameter
DescriptionParameterDescription
<signature-entry-id>Itistheidofsignatureentry,rangingfrom
1to12287.
ExampleToshowcongurationofsignatureentry3,executethefollowing
command.
ZXR10(config)#showsignature-entry3id
setcontent-------------------------------------3
0x616263(0xffffff00000000000000000000000000)
10CondentialandProprietaryInformationofZTECORPORATION

Chapter3
ConfiguringSignature
Symbol
TableofContents
Commandsignature-symbol...........................................11
Commandaddsignature-entry........................................12
Commandsethit-limit-num...........................................12
Commandshowsignature-symbol..................................13
Commandsignature-sym
bol
Command
Function
Thisenterssignaturesymbolcongurationmode.Commandno
canbeusedtocleartheconguration.
CommandModeDPIcongurationmodewithprompttobeZXR10(config-dpi)#
CommandFormatsignature-symbol<signature-symbol-id>
nosignature-symbol<signature-symbol-id>
Parameter
DescriptionParameterDescription
<signature-symbol-
id>
Itistheidofsignaturesymbol,rangingfrom
1to8191.6144-8191isreservedandcannot
beconguredbyuser .0indicatestheidis
invalid.
ExampleToentersignaturesymbolcongurationmode,executethefollow-
ingcommand:
ZXR10(config-dpi)#signature-symbol2
ZXR10(config-dpi-signature-symbol-2)#
CondentialandProprietaryInformationofZTECORPORATION11

ZXR108900CommandManual(DPIVolume)
Commandadd
signature-entry
Command
Function
Thisaddsonesignatureentryforcurrentsignaturesymbol.Com-
mandnocanbeusedtodeletethissignatureentry.
CommandModeSignaturesymbolcongurationmodewithprompttobeZXR10(con-
fig-dpi-signature-symbol-n)#.
CommandFormataddsignature-entry<signature-entry-id>
noaddsignature-entry<signature-entry-id>
Parameter
DescriptionParameterDescription
<signature-entry-id>Itistheidofsignatureentry,rangingfrom
1to12287.
ExampleToentersignaturesymbolcongurationmode,andaddsignature
entry12forsignaturesymbol2,executethefollowingcommands:
ZXR10(config-dpi)#signature-symbol2
ZXR10(config-dpi-signature-symbol-2)#addsignature-entry12
Commandsethit-limit
-num
Command
Function
Itsetslimittosignaturesymbolhitnumberandattachesoneop-
tionforconguringsymbolprotocoltype.
CommandModeSignaturesymbolcongurationmodewithprompttobeZXR10(con-
fig-dpi-signature-symbol-n)#.
CommandFormatsethit-limit-num<hit-num>protocol-type[protocol-type]
Parameter
DescriptionParameterDescription
<hit-num>Itishitnumber ,rangingfrom1to16,1by
default.
[protocol-type]Symbolprotocoltypeisoptional.Themax
lengthofstringis32characters.Itcanbeset
tonormalorinherit,normalbydefault.
ExampleToentersignaturesymbolcongurationmode,setthehitnumber
ofsignaturesymbol2to3,andsettheoptionalprotocoltypeto
inherit,executethefollowingcommands:
ZXR10(config-dpi)#signature-symbol2
ZXR10(config-dpi-signature-symbol-2)#sethit-num-limit3
protocol-typeinherit
12CondentialandProprietaryInformationofZTECORPORATION